mirror of https://lore.kernel.org/lkml/
 help / color / mirror / Atom feed
* [PATCH 0/2] meson-gxbb: Add mali-450 support
@ 2017-02-10 10:04 Neil Armstrong
  2017-02-10 10:04 ` [PATCH 1/2] clk: meson-gxbb: Add MALI clocks and fix GP0 pll support Neil Armstrong
  2017-02-10 10:04 ` [PATCH 2/2] ARM64: dts: meson-gxbb: Add Mali node Neil Armstrong
  0 siblings, 2 replies; 3+ messages in thread
From: Neil Armstrong @ 2017-02-10 10:04 UTC (permalink / raw)
  To: sboyd, khilman, carlo
  Cc: Neil Armstrong, linux-amlogic, linux-clk, linux-arm-kernel, linux-kernel

Since the merge of the Mali dt bindings at [1], add support for Mali clocks
and DT node.

The Mali is clocked by two identical clock paths behind a glitch free mux
to safely change frequency while running.
So these clocks must be added to the meson-gxbb clock controller.

[1] http://lkml.kernel.org/r/b098c4fa9fce88361cca20417978734d0e1b5cca.1485939041.git-series.maxime.ripard@free-electrons.com

Neil Armstrong (2):
  clk: meson-gxbb: Add MALI clocks and fix GP0 pll support
  ARM64: dts: meson-gxbb: Add Mali node

 arch/arm64/boot/dts/amlogic/meson-gxbb.dtsi |  37 +++++
 drivers/clk/meson/clk-pll.c                 |  34 ++++-
 drivers/clk/meson/clkc.h                    |   3 +
 drivers/clk/meson/gxbb.c                    | 211 +++++++++++++++++++++++++++-
 drivers/clk/meson/gxbb.h                    |   7 +-
 include/dt-bindings/clock/gxbb-clkc.h       |   4 +
 6 files changed, 282 insertions(+), 14 deletions(-)

-- 
1.9.1

^ permalink raw reply	[flat|nested] 3+ messages in thread

end of thread, other threads:[~2017-02-10 10:06 UTC | newest]

Thread overview: 3+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2017-02-10 10:04 [PATCH 0/2] meson-gxbb: Add mali-450 support Neil Armstrong
2017-02-10 10:04 ` [PATCH 1/2] clk: meson-gxbb: Add MALI clocks and fix GP0 pll support Neil Armstrong
2017-02-10 10:04 ` [PATCH 2/2] ARM64: dts: meson-gxbb: Add Mali node Neil Armstrong

This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox

all inboxes | Powered by JetHome®