From: "Rafael J. Wysocki" <rjw@sisk.pl>
To: Huang Ying <ying.huang@intel.com>
Cc: Bjorn Helgaas <bhelgaas@google.com>,
linux-kernel@vger.kernel.org, linux-pci@vger.kernel.org,
linux-pm@vger.kernel.org
Subject: Re: [PATCH] PCIe/PM: Do not suspend port if any subordinate device need PME polling
Date: Sat, 15 Dec 2012 00:43:51 +0100 [thread overview]
Message-ID: <1488189.MmZvkLhUAM@vostro.rjw.lan> (raw)
In-Reply-To: <1355453531-23348-1-git-send-email-ying.huang@intel.com>
On Friday, December 14, 2012 10:52:11 AM Huang Ying wrote:
> In
>
> http://www.mail-archive.com/linux-usb@vger.kernel.org/msg07976.html
>
> Ulrich reported that his USB3 cardreader does not work reliably when
> connected to the USB3 port. It turns out that USB3 controller failed
> to be waken up when plugging in the USB3 cardreader. Further
> experiment found that the USB3 host controller can only be waken up
> via polling, while not via PME interrupt. But if the PCIe port that
> the USB3 host controller is connected is suspended, we can not poll
> the USB3 host controller because its config space is not accessible if
> the PCIe port is put into low power state.
>
> To solve the issue, the PCIe port will not be suspended if any
> subordinate device need PME polling.
>
> Reported-by: Ulrich Eckhardt <usb@uli-eckhardt.de>
> Signed-off-by: Huang Ying <ying.huang@intel.com>
> Tested-by: Sarah Sharp <sarah.a.sharp@linux.intel.com>
> Cc: stable@vger.kernel.org # 3.6+
> ---
> drivers/pci/pcie/portdrv_pci.c | 18 +++++++++++++++++-
> 1 file changed, 17 insertions(+), 1 deletion(-)
>
> --- a/drivers/pci/pcie/portdrv_pci.c
> +++ b/drivers/pci/pcie/portdrv_pci.c
> @@ -134,10 +134,26 @@ static int pcie_port_runtime_resume(stru
> return 0;
> }
>
> +static int pci_dev_pme_poll(struct pci_dev *pdev, void *data)
> +{
> + int *pme_poll = data;
> + *pme_poll = *pme_poll || pdev->pme_poll;
I would write that as
*pme_poll ||= pdev->pme_poll;
It is not a big deal, though.
> + return 0;
> +}
> +
> static int pcie_port_runtime_idle(struct device *dev)
> {
> + struct pci_dev *pdev = to_pci_dev(dev);
> + int pme_poll = false;
> +
> + /*
> + * If any subordinate device needs pme poll, we should keep
> + * the port in D0, because we need port in D0 to poll it.
> + */
> + pci_walk_bus(pdev->subordinate, pci_dev_pme_poll, &pme_poll);
> /* Delay for a short while to prevent too frequent suspend/resume */
> - pm_schedule_suspend(dev, 10);
> + if (!pme_poll)
> + pm_schedule_suspend(dev, 10);
> return -EBUSY;
> }
> #else
Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
--
I speak only for myself.
Rafael J. Wysocki, Intel Open Source Technology Center.
prev parent reply other threads:[~2012-12-14 23:38 UTC|newest]
Thread overview: 4+ messages / expand[flat|nested] mbox.gz Atom feed top
2012-12-14 2:52 Huang Ying
[not found] ` <20121214051131.GA31440@richard.>
2012-12-14 23:03 ` Rafael J. Wysocki
[not found] ` <50cdc89b.2788440a.0cfe.ffff8fb7SMTPIN_ADDED_BROKEN@mx.google.com>
2012-12-20 21:44 ` Bjorn Helgaas
2012-12-14 23:43 ` Rafael J. Wysocki [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1488189.MmZvkLhUAM@vostro.rjw.lan \
--to=rjw@sisk.pl \
--cc=bhelgaas@google.com \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-pci@vger.kernel.org \
--cc=linux-pm@vger.kernel.org \
--cc=ying.huang@intel.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®