[RFC PATCH v3 12/12] x86/apic: Remove the apic_virtual_wire_mode_setup()

[Dou Liyang <douly.fnst@cn.fujitsu.com>]

Currently, enable and setup the interrupt mode has been advanced
just behind the timer IRQ setup. It can setup the virtual wire
mode if the system select it. and it also can switch to the final
mode from PIC mode directly.

The apic_virtual_wire_mode_setup() which works for the virtual wire
mode is redundant.

Remove the apic_virtual_wire_mode_setup() function.

Signed-off-by: Dou Liyang <douly.fnst@cn.fujitsu.com>
---
 arch/x86/include/asm/apic.h |  2 --
 arch/x86/kernel/apic/apic.c | 49 ---------------------------------------------
 arch/x86/kernel/irqinit.c   |  2 --
 3 files changed, 53 deletions(-)

diff --git a/arch/x86/include/asm/apic.h b/arch/x86/include/asm/apic.h
index 9f6ac51..0af0da0 100644
--- a/arch/x86/include/asm/apic.h
+++ b/arch/x86/include/asm/apic.h
@@ -136,7 +136,6 @@ extern void disconnect_bsp_APIC(int virt_wire_setup);
 extern void disable_local_APIC(void);
 extern void lapic_shutdown(void);
 extern void sync_Arb_IDs(void);
-extern void apic_virtual_wire_mode_setup(void);
 extern void apic_interrupt_mode_init(void);
 extern void setup_local_APIC(void);
 extern void init_apic_mappings(void);
@@ -179,7 +178,6 @@ static inline void disable_local_APIC(void) { }
 # define setup_boot_APIC_clock x86_init_noop
 # define setup_secondary_APIC_clock x86_init_noop
 static inline void lapic_update_tsc_freq(void) { }
-static inline void apic_virtual_wire_mode_setup(void) {}
 static inline void apic_interrupt_mode_init(void) {}
 #endif /* !CONFIG_X86_LOCAL_APIC */
 
diff --git a/arch/x86/kernel/apic/apic.c b/arch/x86/kernel/apic/apic.c
index c2635bf..3000d90 100644
--- a/arch/x86/kernel/apic/apic.c
+++ b/arch/x86/kernel/apic/apic.c
@@ -1234,55 +1234,6 @@ static int __init apic_interrupt_mode_select(int *upmode)
 
 }
 
-/*
- * Setup the through-local-APIC virtual wire mode.
- */
-void __init apic_virtual_wire_mode_setup(void)
-{
-	unsigned int value;
-
-	/*
-	 * Don't do the setup now if we have a SMP BIOS as the
-	 * through-I/O-APIC virtual wire mode might be active.
-	 */
-	if (smp_found_config || !boot_cpu_has(X86_FEATURE_APIC))
-		return;
-
-	/*
-	 * Do not trust the local APIC being empty at bootup.
-	 */
-	clear_local_APIC();
-
-	/*
-	 * Enable APIC.
-	 */
-	value = apic_read(APIC_SPIV);
-	value &= ~APIC_VECTOR_MASK;
-	value |= APIC_SPIV_APIC_ENABLED;
-
-#ifdef CONFIG_X86_32
-	/* This bit is reserved on P4/Xeon and should be cleared */
-	if ((boot_cpu_data.x86_vendor == X86_VENDOR_INTEL) &&
-	    (boot_cpu_data.x86 == 15))
-		value &= ~APIC_SPIV_FOCUS_DISABLED;
-	else
-#endif
-		value |= APIC_SPIV_FOCUS_DISABLED;
-	value |= SPURIOUS_APIC_VECTOR;
-	apic_write(APIC_SPIV, value);
-
-	/*
-	 * Set up the virtual wire mode.
-	 */
-	apic_write(APIC_LVT0, APIC_DM_EXTINT);
-	value = APIC_DM_NMI;
-	if (!lapic_is_integrated())		/* 82489DX */
-		value |= APIC_LVT_LEVEL_TRIGGER;
-	if (apic_extnmi == APIC_EXTNMI_NONE)
-		value |= APIC_LVT_MASKED;
-	apic_write(APIC_LVT1, value);
-}
-
 /* Init the interrupt delivery mode for the BSP */
 void __init apic_interrupt_mode_init(void)
 {
diff --git a/arch/x86/kernel/irqinit.c b/arch/x86/kernel/irqinit.c
index e4f89b6..488c9e2 100644
--- a/arch/x86/kernel/irqinit.c
+++ b/arch/x86/kernel/irqinit.c
@@ -72,8 +72,6 @@ void __init init_ISA_irqs(void)
 	struct irq_chip *chip = legacy_pic->chip;
 	int i;
 
-	apic_virtual_wire_mode_setup();
-
 	legacy_pic->init(0);
 
 	for (i = 0; i < nr_legacy_irqs(); i++)
-- 
2.5.5