From: Dou Liyang <douly.fnst@cn.fujitsu.com>
To: <x86@kernel.org>, <linux-kernel@vger.kernel.org>
Cc: <tglx@linutronix.de>, <mingo@kernel.org>, <hpa@zytor.com>,
<ebiederm@xmission.com>, <bhe@redhat.com>,
<izumi.taku@jp.fujitsu.com>,
Dou Liyang <douly.fnst@cn.fujitsu.com>
Subject: [RFC PATCH v3 03/12] x86/apic: Prepare for unifying the interrupt delivery modes setup
Date: Wed, 10 May 2017 21:44:40 +0800 [thread overview]
Message-ID: <1494423889-25799-4-git-send-email-douly.fnst@cn.fujitsu.com> (raw)
In-Reply-To: <1494423889-25799-1-git-send-email-douly.fnst@cn.fujitsu.com>
There are three positions for initializing the interrupt delivery
modes:
1) In IRQ initial function, may setup the through-local-APIC
virtual wire mode.
2) In an SMP-capable system, will try to switch to symmetric I/O
model when preparing the cpus in native_smp_prepare_cpus().
3) In UP system with UP_LATE_INIT=y, will set up local APIC and
I/O APIC in smp_init().
Switching to symmetric I/O mode is so late, which causes kernel
is in a mismatched mode at the beginning of booting time. And it
causes the dump-capture kernel hangs with 'notsc' option inherited
from 1st kernel option.
Preparatory patch to initialize an interrupt mode directly and provide
a new function apic_interrupt_mode_init() to unify that three positions
and do that setup as soon as possible.
Signed-off-by: Dou Liyang <douly.fnst@cn.fujitsu.com>
---
v2 --> v3:
change the function name from init_interrupt_mode to
apic_interrupt_mode_init.
arch/x86/include/asm/apic.h | 2 ++
arch/x86/kernel/apic/apic.c | 16 ++++++++++++++++
2 files changed, 18 insertions(+)
diff --git a/arch/x86/include/asm/apic.h b/arch/x86/include/asm/apic.h
index 4f4519b..e9502e6 100644
--- a/arch/x86/include/asm/apic.h
+++ b/arch/x86/include/asm/apic.h
@@ -128,6 +128,7 @@ extern void disable_local_APIC(void);
extern void lapic_shutdown(void);
extern void sync_Arb_IDs(void);
extern void apic_virtual_wire_mode_setup(void);
+extern void apic_interrupt_mode_init(void);
extern void setup_local_APIC(void);
extern void init_apic_mappings(void);
void register_lapic_address(unsigned long address);
@@ -171,6 +172,7 @@ static inline void disable_local_APIC(void) { }
# define setup_secondary_APIC_clock x86_init_noop
static inline void lapic_update_tsc_freq(void) { }
static inline void apic_virtual_wire_mode_setup(void) {}
+static inline void apic_interrupt_mode_init(void) {}
#endif /* !CONFIG_X86_LOCAL_APIC */
#ifdef CONFIG_X86_X2APIC
diff --git a/arch/x86/kernel/apic/apic.c b/arch/x86/kernel/apic/apic.c
index 3342f144..56be7f3 100644
--- a/arch/x86/kernel/apic/apic.c
+++ b/arch/x86/kernel/apic/apic.c
@@ -1267,6 +1267,22 @@ void __init apic_virtual_wire_mode_setup(void)
apic_write(APIC_LVT1, value);
}
+/* Init the interrupt delivery mode for the BSP */
+void __init apic_interrupt_mode_init(void)
+{
+ switch (apic_interrupt_mode_select()) {
+ case APIC_PIC:
+ pr_info("Keep in PIC mode(8259)\n");
+ return;
+ case APIC_VIRTUAL_WIRE:
+ pr_info("Switch to virtual wire mode\n");
+ return;
+ case APIC_SYMMETRIC_IO:
+ pr_info("Switch to symmectic I/O mode\n");
+ return;
+ }
+}
+
static void lapic_setup_esr(void)
{
unsigned int oldvalue, value, maxlvt;
--
2.5.5
next prev parent reply other threads:[~2017-05-10 13:45 UTC|newest]
Thread overview: 23+ messages / expand[flat|nested] mbox.gz Atom feed top
2017-05-10 13:44 [RFC PATCH v3 00/12] Unify interrupt mode and setup it as soon as possible Dou Liyang
2017-05-10 13:44 ` [RFC PATCH v3 01/12] x86/apic: Replace init_bsp_APIC() with apic_virtual_wire_mode_setup() Dou Liyang
2017-05-10 13:44 ` [RFC PATCH v3 02/12] x86/apic: Construct a selector for the interrupt delivery mode Dou Liyang
2017-05-10 13:44 ` Dou Liyang [this message]
2017-05-10 13:44 ` [RFC PATCH v3 04/12] x86/time: Initialize interrupt mode behind timer init Dou Liyang
2017-06-06 6:00 ` [RFC PATCH v4 " Dou Liyang
2017-05-10 13:44 ` [RFC PATCH v3 05/12] x86/ioapic: Refactor the delay logic in timer_irq_works() Dou Liyang
2017-05-26 8:10 ` [RFC PATCH v4 " Dou Liyang
2017-05-10 13:44 ` [RFC PATCH v3 06/12] x86/apic: Split local APIC timer setup from the APIC setup Dou Liyang
2017-05-10 13:44 ` [RFC PATCH v3 07/12] x86/apic: Move the logical APIC ID setup from apic_bsp_setup() Dou Liyang
2017-05-10 13:44 ` [RFC PATCH v3 08/12] x86/apic: Make interrupt mode setup earlier for SMP-capable system Dou Liyang
2017-05-10 13:44 ` [RFC PATCH v3 09/12] x86/apic: Setup interrupt mode earlier in case of no SMP motherboard Dou Liyang
2017-05-12 9:55 ` [RFC PATCH v4 " Dou Liyang
2017-05-10 13:44 ` [RFC PATCH v3 10/12] x86/apic: Make the interrupt mode setup earlier for UP system Dou Liyang
2017-05-11 10:57 ` [RFC PATCH v4 " Dou Liyang
2017-05-10 13:44 ` [RFC PATCH v3 11/12] x86/apic: Mark the apic_interrupt_mode extern for disable_smp() Dou Liyang
2017-05-10 13:44 ` [RFC PATCH v3 12/12] x86/apic: Remove the apic_virtual_wire_mode_setup() Dou Liyang
2017-05-22 20:23 ` [RFC PATCH v3 00/12] Unify interrupt mode and setup it as soon as possible Thomas Gleixner
2017-05-23 1:29 ` Dou Liyang
2017-06-06 6:50 ` Dou Liyang
2017-06-26 10:08 ` Dou Liyang
2017-06-26 11:50 ` Thomas Gleixner
2017-06-27 1:50 ` Dou Liyang
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1494423889-25799-4-git-send-email-douly.fnst@cn.fujitsu.com \
--to=douly.fnst@cn.fujitsu.com \
--cc=bhe@redhat.com \
--cc=ebiederm@xmission.com \
--cc=hpa@zytor.com \
--cc=izumi.taku@jp.fujitsu.com \
--cc=linux-kernel@vger.kernel.org \
--cc=mingo@kernel.org \
--cc=tglx@linutronix.de \
--cc=x86@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®