From: John Garry <john.garry@huawei.com>
To: <jejb@linux.vnet.ibm.com>, <martin.petersen@oracle.com>
Cc: <john.garry2@mail.dcu.ie>, <linuxarm@huawei.com>,
<linux-scsi@vger.kernel.org>, <linux-kernel@vger.kernel.org>,
<arnd@arndb.de>, Xiang Chen <chenxiang66@hisilicon.com>,
John Garry <john.garry@huawei.com>
Subject: [PATCH 22/22] scsi: hisi_sas: modify internal abort dev flow for v3 hw
Date: Wed, 17 May 2017 18:49:57 +0800 [thread overview]
Message-ID: <1495018197-120535-23-git-send-email-john.garry@huawei.com> (raw)
In-Reply-To: <1495018197-120535-1-git-send-email-john.garry@huawei.com>
From: Xiang Chen <chenxiang66@hisilicon.com>
There is a change for abort dev for v3 hw: add registers to configure
unaborted iptt for a device, and then inform this to logic.
Signed-off-by: Xiang Chen <chenxiang66@hisilicon.com>
Signed-off-by: John Garry <john.garry@huawei.com>
---
drivers/scsi/hisi_sas/hisi_sas.h | 2 ++
drivers/scsi/hisi_sas/hisi_sas_main.c | 15 +++++++++++++++
drivers/scsi/hisi_sas/hisi_sas_v3_hw.c | 28 ++++++++++++++++++++++++++++
3 files changed, 45 insertions(+)
diff --git a/drivers/scsi/hisi_sas/hisi_sas.h b/drivers/scsi/hisi_sas/hisi_sas.h
index c7d1144..757a134 100644
--- a/drivers/scsi/hisi_sas/hisi_sas.h
+++ b/drivers/scsi/hisi_sas/hisi_sas.h
@@ -181,6 +181,8 @@ struct hisi_sas_hw {
void (*free_device)(struct hisi_hba *hisi_hba,
struct hisi_sas_device *dev);
int (*get_wideport_bitmap)(struct hisi_hba *hisi_hba, int port_id);
+ void (*dereg_device)(struct hisi_hba *hisi_hba,
+ struct domain_device *device);
int (*soft_reset)(struct hisi_hba *hisi_hba);
int max_command_entries;
int complete_hdr_size;
diff --git a/drivers/scsi/hisi_sas/hisi_sas_main.c b/drivers/scsi/hisi_sas/hisi_sas_main.c
index 156b66b..80ffba4 100644
--- a/drivers/scsi/hisi_sas/hisi_sas_main.c
+++ b/drivers/scsi/hisi_sas/hisi_sas_main.c
@@ -760,6 +760,13 @@ static void hisi_sas_release_tasks(struct hisi_hba *hisi_hba)
}
}
+static void hisi_sas_dereg_device(struct hisi_hba *hisi_hba,
+ struct domain_device *device)
+{
+ if (hisi_hba->hw->dereg_device)
+ hisi_hba->hw->dereg_device(hisi_hba, device);
+}
+
static void hisi_sas_dev_gone(struct domain_device *device)
{
struct hisi_sas_device *sas_dev = device->lldd_dev;
@@ -773,6 +780,8 @@ static void hisi_sas_dev_gone(struct domain_device *device)
hisi_sas_internal_task_abort(hisi_hba, device,
HISI_SAS_INT_ABT_DEV, 0);
+ hisi_sas_dereg_device(hisi_hba, device);
+
hisi_hba->hw->free_device(hisi_hba, sas_dev);
device->lldd_dev = NULL;
memset(sas_dev, 0, sizeof(*sas_dev));
@@ -1104,6 +1113,7 @@ static int hisi_sas_abort_task(struct sas_task *task)
if (task->dev->dev_type == SAS_SATA_DEV) {
hisi_sas_internal_task_abort(hisi_hba, device,
HISI_SAS_INT_ABT_DEV, 0);
+ hisi_sas_dereg_device(hisi_hba, device);
rc = hisi_sas_softreset_ata_disk(device);
}
} else if (task->task_proto & SAS_PROTOCOL_SMP) {
@@ -1170,6 +1180,10 @@ static int hisi_sas_I_T_nexus_reset(struct domain_device *device)
return TMF_RESP_FUNC_FAILED;
sas_dev->dev_status = HISI_SAS_DEV_NORMAL;
+ hisi_sas_internal_task_abort(hisi_hba, device,
+ HISI_SAS_INT_ABT_DEV, 0);
+ hisi_sas_dereg_device(hisi_hba, device);
+
rc = hisi_sas_debug_I_T_nexus_reset(device);
if (rc == TMF_RESP_FUNC_COMPLETE) {
@@ -1197,6 +1211,7 @@ static int hisi_sas_lu_reset(struct domain_device *device, u8 *lun)
HISI_SAS_INT_ABT_DEV, 0);
if (rc == TMF_RESP_FUNC_FAILED)
goto out;
+ hisi_sas_dereg_device(hisi_hba, device);
phy = sas_get_local_phy(device);
diff --git a/drivers/scsi/hisi_sas/hisi_sas_v3_hw.c b/drivers/scsi/hisi_sas/hisi_sas_v3_hw.c
index 766455a..54546cf 100644
--- a/drivers/scsi/hisi_sas/hisi_sas_v3_hw.c
+++ b/drivers/scsi/hisi_sas/hisi_sas_v3_hw.c
@@ -50,6 +50,10 @@
#define CFG_ABT_SET_QUERY_IPTT 0xd4
#define CFG_SET_ABORTED_IPTT_OFF 0
#define CFG_SET_ABORTED_IPTT_MSK (0xfff << CFG_SET_ABORTED_IPTT_OFF)
+#define CFG_SET_ABORTED_EN_OFF 12
+#define CFG_ABT_SET_IPTT_DONE 0xd8
+#define CFG_ABT_SET_IPTT_DONE_OFF 0
+#define HGC_IOMB_PROC1_STATUS 0x104
#define CFG_1US_TIMER_TRSH 0xcc
#define HGC_LM_DFX_STATUS2 0x128
#define HGC_LM_DFX_STATUS2_IOSTLIST_OFF 0
@@ -1997,6 +2001,29 @@ enum sas_linkrate phy_get_max_linkrate_v3_hw(void)
return SAS_LINK_RATE_12_0_GBPS;
}
+static void dereg_device_v3_hw(struct hisi_hba *hisi_hba,
+ struct domain_device *device)
+{
+ struct hisi_sas_slot *slot, *slot2;
+ struct hisi_sas_device *sas_dev = device->lldd_dev;
+ u32 cfg_abt_set_query_iptt;
+
+ cfg_abt_set_query_iptt = hisi_sas_read32(hisi_hba,
+ CFG_ABT_SET_QUERY_IPTT);
+ list_for_each_entry_safe(slot, slot2, &sas_dev->list, entry) {
+ cfg_abt_set_query_iptt &= ~CFG_SET_ABORTED_IPTT_MSK;
+ cfg_abt_set_query_iptt |= (1 << CFG_SET_ABORTED_EN_OFF) |
+ (slot->idx << CFG_SET_ABORTED_IPTT_OFF);
+ hisi_sas_write32(hisi_hba, CFG_ABT_SET_QUERY_IPTT,
+ cfg_abt_set_query_iptt);
+ }
+ cfg_abt_set_query_iptt &= ~(1 << CFG_SET_ABORTED_EN_OFF);
+ hisi_sas_write32(hisi_hba, CFG_ABT_SET_QUERY_IPTT,
+ cfg_abt_set_query_iptt);
+ hisi_sas_write32(hisi_hba, CFG_ABT_SET_IPTT_DONE,
+ 1 << CFG_ABT_SET_IPTT_DONE_OFF);
+}
+
static const struct hisi_sas_hw hisi_sas_v3_hw = {
.hw_init = hisi_sas_v3_init,
.setup_itct = setup_itct_v3_hw,
@@ -2017,6 +2044,7 @@ enum sas_linkrate phy_get_max_linkrate_v3_hw(void)
.phy_disable = disable_phy_v3_hw,
.phy_hard_reset = phy_hard_reset_v3_hw,
.phy_get_max_linkrate = phy_get_max_linkrate_v3_hw,
+ .dereg_device = dereg_device_v3_hw,
};
enum {
--
1.9.1
next prev parent reply other threads:[~2017-05-17 10:21 UTC|newest]
Thread overview: 35+ messages / expand[flat|nested] mbox.gz Atom feed top
2017-05-17 10:49 [PATCH 00/22] hisi_sas: hip08 support John Garry
2017-05-17 10:49 ` [PATCH 01/22] scsi: hisi_sas: fix timeout check in hisi_sas_internal_task_abort() John Garry
2017-05-17 10:49 ` [PATCH 02/22] scsi: hisi_sas: optimise the usage of hisi_hba.lock John Garry
2017-05-17 10:49 ` [PATCH 03/22] scsi: hisi_sas: relocate get_ata_protocol() John Garry
2017-05-17 10:49 ` [PATCH 04/22] scsi: hisi_sas: relocate sata_done_v2_hw() John Garry
2017-05-17 10:49 ` [PATCH 05/22] scsi: hisi_sas: relocate get_ncq_tag_v2_hw() John Garry
2017-05-17 10:49 ` [PATCH 06/22] scsi: hisi_sas: add pci_dev in hisi_hba struct John Garry
2017-05-17 10:49 ` [PATCH 07/22] scsi: hisi_sas: add the initialisation for pci-based controller John Garry
2017-05-17 12:33 ` Arnd Bergmann
2017-05-17 13:03 ` John Garry
2017-05-17 10:49 ` [PATCH 08/22] scsi: hisi_sas: add bare v3 hw driver John Garry
2017-05-17 10:49 ` [PATCH 09/22] scsi: hisi_sas: retrieve SAS address for pci-based controller John Garry
2017-05-17 12:37 ` Arnd Bergmann
2017-05-17 13:37 ` John Garry
2017-05-17 14:13 ` Arnd Bergmann
2017-05-17 16:45 ` John Garry
2017-05-17 19:23 ` Arnd Bergmann
2017-05-18 9:09 ` John Garry
2017-05-17 10:49 ` [PATCH 10/22] scsi: hisi_sas: add v3 hw init John Garry
2017-05-17 10:49 ` [PATCH 11/22] scsi: hisi_sas: add v3 hw PHY init John Garry
2017-05-17 10:49 ` [PATCH 12/22] scsi: hisi_sas: add phy up/down/bcast and channel ISR John Garry
2017-05-17 10:49 ` [PATCH 13/22] scsi: hisi_sas: add v3 cq interrupt handler John Garry
2017-05-17 10:49 ` [PATCH 14/22] scsi: hisi_sas: add v3 code to send SSP frame John Garry
2017-05-17 10:49 ` [PATCH 15/22] scsi: hisi_sas: add v3 code to send SMP frame John Garry
2017-05-17 10:49 ` [PATCH 16/22] scsi: hisi_sas: add v3 code to send ATA frame John Garry
2017-05-17 10:49 ` [PATCH 17/22] scsi: hisi_sas: add v3 code for itct setup and free John Garry
2017-05-17 10:49 ` [PATCH 18/22] scsi: hisi_sas: add v3 code to send internal abort command John Garry
2017-05-17 10:49 ` [PATCH 19/22] scsi: hisi_sas: add get_wideport_bitmap_v3_hw() John Garry
2017-05-17 10:49 ` [PATCH 20/22] scsi: hisi_sas: Add v3 code to support ECC and AXI bus fatal error John Garry
2017-05-17 12:27 ` Arnd Bergmann
2017-05-17 12:38 ` John Garry
2017-06-13 14:05 ` John Garry
2017-05-17 10:49 ` [PATCH 21/22] scsi: hisi_sas: add v3 code to fill some more hw function pointers John Garry
2017-05-17 10:49 ` John Garry [this message]
2017-05-17 12:38 ` [PATCH 00/22] hisi_sas: hip08 support Arnd Bergmann
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1495018197-120535-23-git-send-email-john.garry@huawei.com \
--to=john.garry@huawei.com \
--cc=arnd@arndb.de \
--cc=chenxiang66@hisilicon.com \
--cc=jejb@linux.vnet.ibm.com \
--cc=john.garry2@mail.dcu.ie \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-scsi@vger.kernel.org \
--cc=linuxarm@huawei.com \
--cc=martin.petersen@oracle.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®