mirror of https://lore.kernel.org/lkml/
 help / color / mirror / Atom feed
From: John Garry <john.garry@huawei.com>
To: <jejb@linux.vnet.ibm.com>, <martin.petersen@oracle.com>
Cc: <john.garry2@mail.dcu.ie>, <linuxarm@huawei.com>,
	<linux-scsi@vger.kernel.org>, <linux-kernel@vger.kernel.org>,
	<arnd@arndb.de>, Xiang Chen <chenxiang66@hisilicon.com>,
	John Garry <john.garry@huawei.com>
Subject: [PATCH v3 21/23] scsi: hisi_sas: Add v3 code to support ECC and AXI bus fatal error
Date: Wed, 31 May 2017 22:33:13 +0800	[thread overview]
Message-ID: <1496241195-217678-22-git-send-email-john.garry@huawei.com> (raw)
In-Reply-To: <1496241195-217678-1-git-send-email-john.garry@huawei.com>

From: Xiang Chen <chenxiang66@hisilicon.com>

For ECC 1bit error, logic can recover it, so we only print a warning.
For ECC multi-bit and AXI bus fatal error, we panic.

Note: once v3 hw controller reset support is added, the panic will
      be replaced by a controller reset, like v2 hw.

Signed-off-by: John Garry <john.garry@huawei.com>
Signed-off-by: Xiang Chen <chenxiang66@hisilicon.com>
---
 drivers/scsi/hisi_sas/hisi_sas_v3_hw.c | 402 ++++++++++++++++++++++++++++++++-
 1 file changed, 400 insertions(+), 2 deletions(-)

diff --git a/drivers/scsi/hisi_sas/hisi_sas_v3_hw.c b/drivers/scsi/hisi_sas/hisi_sas_v3_hw.c
index f71f1ba..3203221 100644
--- a/drivers/scsi/hisi_sas/hisi_sas_v3_hw.c
+++ b/drivers/scsi/hisi_sas/hisi_sas_v3_hw.c
@@ -51,7 +51,39 @@
 #define CFG_SET_ABORTED_IPTT_OFF	0
 #define CFG_SET_ABORTED_IPTT_MSK	(0xfff << CFG_SET_ABORTED_IPTT_OFF)
 #define CFG_1US_TIMER_TRSH		0xcc
+#define HGC_LM_DFX_STATUS2		0x128
+#define HGC_LM_DFX_STATUS2_IOSTLIST_OFF		0
+#define HGC_LM_DFX_STATUS2_IOSTLIST_MSK	(0xfff <<\
+					HGC_LM_DFX_STATUS2_IOSTLIST_OFF)
+#define HGC_LM_DFX_STATUS2_ITCTLIST_OFF		12
+#define HGC_LM_DFX_STATUS2_ITCTLIST_MSK	(0x7ff <<\
+					HGC_LM_DFX_STATUS2_ITCTLIST_OFF)
+#define HGC_CQE_ECC_ADDR		0x13c
+#define HGC_CQE_ECC_1B_ADDR_OFF		0
+#define HGC_CQE_ECC_1B_ADDR_MSK		(0x3f << HGC_CQE_ECC_1B_ADDR_OFF)
+#define HGC_CQE_ECC_MB_ADDR_OFF		8
+#define HGC_CQE_ECC_MB_ADDR_MSK		(0x3f << HGC_CQE_ECC_MB_ADDR_OFF)
+#define HGC_IOST_ECC_ADDR		0x140
+#define HGC_IOST_ECC_1B_ADDR_OFF	0
+#define HGC_IOST_ECC_1B_ADDR_MSK	(0x3ff << HGC_IOST_ECC_1B_ADDR_OFF)
+#define HGC_IOST_ECC_MB_ADDR_OFF	16
+#define HGC_IOST_ECC_MB_ADDR_MSK	(0x3ff << HGC_IOST_ECC_MB_ADDR_OFF)
+#define HGC_DQE_ECC_ADDR		0x144
+#define HGC_DQE_ECC_1B_ADDR_OFF		0
+#define HGC_DQE_ECC_1B_ADDR_MSK		(0xfff << HGC_DQE_ECC_1B_ADDR_OFF)
+#define HGC_DQE_ECC_MB_ADDR_OFF		16
+#define HGC_DQE_ECC_MB_ADDR_MSK		(0xfff << HGC_DQE_ECC_MB_ADDR_OFF)
 #define CHNL_INT_STATUS			0x148
+#define HGC_ITCT_ECC_ADDR		0x150
+#define HGC_ITCT_ECC_1B_ADDR_OFF	0
+#define HGC_ITCT_ECC_1B_ADDR_MSK	(0x3ff << HGC_ITCT_ECC_1B_ADDR_OFF)
+#define HGC_ITCT_ECC_MB_ADDR_OFF	16
+#define HGC_ITCT_ECC_MB_ADDR_MSK	(0x3ff << HGC_ITCT_ECC_MB_ADDR_OFF)
+#define HGC_AXI_FIFO_ERR_INFO	0x154
+#define AXI_ERR_INFO_OFF		0
+#define AXI_ERR_INFO_MSK		(0xff << AXI_ERR_INFO_OFF)
+#define FIFO_ERR_INFO_OFF		8
+#define FIFO_ERR_INFO_MSK		(0xff << FIFO_ERR_INFO_OFF)
 #define INT_COAL_EN			0x19c
 #define OQ_INT_COAL_TIME		0x1a0
 #define OQ_INT_COAL_CNT			0x1a4
@@ -85,6 +117,26 @@
 #define ENT_INT_SRC_MSK3_ENT95_MSK_MSK	(0x1 << ENT_INT_SRC_MSK3_ENT95_MSK_OFF)
 #define SAS_ECC_INTR			0x1e8
 #define SAS_ECC_INTR_MSK		0x1ec
+#define SAS_ECC_INTR_DQE_ECC_1B_OFF		0
+#define SAS_ECC_INTR_DQE_ECC_MB_OFF		1
+#define SAS_ECC_INTR_IOST_ECC_1B_OFF	2
+#define SAS_ECC_INTR_IOST_ECC_MB_OFF	3
+#define SAS_ECC_INTR_ITCT_ECC_MB_OFF	4
+#define SAS_ECC_INTR_ITCT_ECC_1B_OFF	5
+#define SAS_ECC_INTR_IOSTLIST_ECC_MB_OFF	6
+#define SAS_ECC_INTR_IOSTLIST_ECC_1B_OFF	7
+#define SAS_ECC_INTR_ITCTLIST_ECC_MB_OFF	8
+#define SAS_ECC_INTR_ITCTLIST_ECC_1B_OFF	9
+#define SAS_ECC_INTR_CQE_ECC_1B_OFF		10
+#define SAS_ECC_INTR_CQE_ECC_MB_OFF		11
+#define SAS_ECC_INTR_NCQ_MEM0_ECC_MB_OFF	12
+#define SAS_ECC_INTR_NCQ_MEM0_ECC_1B_OFF	13
+#define SAS_ECC_INTR_NCQ_MEM1_ECC_MB_OFF	14
+#define SAS_ECC_INTR_NCQ_MEM1_ECC_1B_OFF	15
+#define SAS_ECC_INTR_NCQ_MEM2_ECC_MB_OFF	16
+#define SAS_ECC_INTR_NCQ_MEM2_ECC_1B_OFF	17
+#define SAS_ECC_INTR_NCQ_MEM3_ECC_MB_OFF	18
+#define SAS_ECC_INTR_NCQ_MEM3_ECC_1B_OFF	19
 #define HGC_ERR_STAT_EN			0x238
 #define DLVRY_Q_0_BASE_ADDR_LO		0x260
 #define DLVRY_Q_0_BASE_ADDR_HI		0x264
@@ -98,6 +150,20 @@
 #define COMPL_Q_0_DEPTH			0x4e8
 #define COMPL_Q_0_WR_PTR		0x4ec
 #define COMPL_Q_0_RD_PTR		0x4f0
+#define HGC_RXM_DFX_STATUS14	0xae8
+#define HGC_RXM_DFX_STATUS14_MEM0_OFF		0
+#define HGC_RXM_DFX_STATUS14_MEM0_MSK		(0x1ff <<\
+						HGC_RXM_DFX_STATUS14_MEM0_OFF)
+#define HGC_RXM_DFX_STATUS14_MEM1_OFF		9
+#define HGC_RXM_DFX_STATUS14_MEM1_MSK		(0x1ff <<\
+						HGC_RXM_DFX_STATUS14_MEM1_OFF)
+#define HGC_RXM_DFX_STATUS14_MEM2_OFF		18
+#define HGC_RXM_DFX_STATUS14_MEM2_MSK		(0x1ff <<\
+						HGC_RXM_DFX_STATUS14_MEM2_OFF)
+#define HGC_RXM_DFX_STATUS15	0xaec
+#define HGC_RXM_DFX_STATUS15_MEM3_OFF		0
+#define HGC_RXM_DFX_STATUS15_MEM3_MSK		(0x1ff <<\
+						HGC_RXM_DFX_STATUS15_MEM3_OFF)
 #define AWQOS_AWCACHE_CFG	0xc84
 #define ARQOS_ARCACHE_CFG	0xc88
 
@@ -260,6 +326,8 @@
 #define ITCT_HDR_RTOLT_OFF		48
 #define ITCT_HDR_RTOLT_MSK		(0xffffULL << ITCT_HDR_RTOLT_OFF)
 
+#define HISI_SAS_FATAL_INT_NR	2
+
 struct hisi_sas_complete_v3_hdr {
 	__le32 dw0;
 	__le32 dw1;
@@ -1168,8 +1236,9 @@ static irqreturn_t int_chnl_int_v3_hw(int irq_no, void *p)
 						irq_value1) {
 			if (irq_value1 & (CHL_INT1_DMAC_RX_ECC_ERR_MSK |
 					  CHL_INT1_DMAC_TX_ECC_ERR_MSK))
-				panic("%s: DMAC RX/TX ecc bad error! (0x%x)",
-					dev_name(dev), irq_value1);
+				panic("%s: DMAC RX/TX ecc bad error!"
+				      " (0x%x)",
+				      dev_name(dev), irq_value1);
 
 			hisi_sas_phy_write32(hisi_hba, phy_no,
 					     CHL_INT1, irq_value1);
@@ -1196,6 +1265,320 @@ static irqreturn_t int_chnl_int_v3_hw(int irq_no, void *p)
 	return IRQ_HANDLED;
 }
 
+static void one_bit_ecc_error_process_v3_hw(struct hisi_hba *hisi_hba,
+		u32 irq_value)
+{
+	struct device *dev = hisi_hba->dev;
+	u32 reg_val;
+
+	if (irq_value & BIT(SAS_ECC_INTR_DQE_ECC_1B_OFF)) {
+		reg_val = hisi_sas_read32(hisi_hba, HGC_DQE_ECC_ADDR);
+		dev_info(dev, "hgc_dqe_acc1b_intr found: Ram address is 0x%08X\n",
+				(reg_val & HGC_DQE_ECC_1B_ADDR_MSK)
+				>> HGC_DQE_ECC_1B_ADDR_OFF);
+	}
+
+	if (irq_value & BIT(SAS_ECC_INTR_IOST_ECC_1B_OFF)) {
+		reg_val = hisi_sas_read32(hisi_hba, HGC_IOST_ECC_ADDR);
+		dev_info(dev, "hgc_iost_acc1b_intr found: Ram address is 0x%08X\n",
+				(reg_val & HGC_IOST_ECC_1B_ADDR_MSK)
+				>> HGC_IOST_ECC_1B_ADDR_OFF);
+	}
+
+	if (irq_value & BIT(SAS_ECC_INTR_ITCT_ECC_1B_OFF)) {
+		reg_val = hisi_sas_read32(hisi_hba, HGC_ITCT_ECC_ADDR);
+		dev_info(dev, "hgc_itct_acc1b_intr found: Ram address is 0x%08X\n",
+				(reg_val & HGC_ITCT_ECC_1B_ADDR_MSK)
+				>> HGC_ITCT_ECC_1B_ADDR_OFF);
+	}
+
+	if (irq_value & BIT(SAS_ECC_INTR_IOSTLIST_ECC_1B_OFF)) {
+		reg_val = hisi_sas_read32(hisi_hba, HGC_LM_DFX_STATUS2);
+		dev_info(dev, "hgc_iostl_acc1b_intr found: memory address is 0x%08X\n",
+				(reg_val & HGC_LM_DFX_STATUS2_IOSTLIST_MSK)
+				>> HGC_LM_DFX_STATUS2_IOSTLIST_OFF);
+	}
+
+	if (irq_value & BIT(SAS_ECC_INTR_ITCTLIST_ECC_1B_OFF)) {
+		reg_val = hisi_sas_read32(hisi_hba, HGC_LM_DFX_STATUS2);
+		dev_info(dev, "hgc_itctl_acc1b_intr found: memory address is 0x%08X\n",
+				(reg_val & HGC_LM_DFX_STATUS2_ITCTLIST_MSK)
+				>> HGC_LM_DFX_STATUS2_ITCTLIST_OFF);
+	}
+
+	if (irq_value & BIT(SAS_ECC_INTR_CQE_ECC_1B_OFF)) {
+		reg_val = hisi_sas_read32(hisi_hba, HGC_CQE_ECC_ADDR);
+		dev_info(dev, "hgc_cqe_acc1b_intr found: Ram address is 0x%08X\n",
+				(reg_val & HGC_CQE_ECC_1B_ADDR_MSK)
+				>> HGC_CQE_ECC_1B_ADDR_OFF);
+	}
+
+	if (irq_value & BIT(SAS_ECC_INTR_NCQ_MEM0_ECC_1B_OFF)) {
+		reg_val = hisi_sas_read32(hisi_hba, HGC_RXM_DFX_STATUS14);
+		dev_info(dev, "rxm_mem0_acc1b_intr found: memory address is 0x%08X\n",
+				(reg_val & HGC_RXM_DFX_STATUS14_MEM0_MSK)
+				>> HGC_RXM_DFX_STATUS14_MEM0_OFF);
+	}
+
+	if (irq_value & BIT(SAS_ECC_INTR_NCQ_MEM1_ECC_1B_OFF)) {
+		reg_val = hisi_sas_read32(hisi_hba, HGC_RXM_DFX_STATUS14);
+		dev_info(dev, "rxm_mem1_acc1b_intr found: memory address is 0x%08X\n",
+				(reg_val & HGC_RXM_DFX_STATUS14_MEM1_MSK)
+				>> HGC_RXM_DFX_STATUS14_MEM1_OFF);
+	}
+
+	if (irq_value & BIT(SAS_ECC_INTR_NCQ_MEM2_ECC_1B_OFF)) {
+		reg_val = hisi_sas_read32(hisi_hba, HGC_RXM_DFX_STATUS14);
+		dev_info(dev, "rxm_mem2_acc1b_intr found: memory address is 0x%08X\n",
+				(reg_val & HGC_RXM_DFX_STATUS14_MEM2_MSK)
+				>> HGC_RXM_DFX_STATUS14_MEM2_OFF);
+	}
+
+	if (irq_value & BIT(SAS_ECC_INTR_NCQ_MEM3_ECC_1B_OFF)) {
+		reg_val = hisi_sas_read32(hisi_hba, HGC_RXM_DFX_STATUS15);
+		dev_info(dev, "rxm_mem3_acc1b_intr found: memory address is 0x%08X\n",
+				(reg_val & HGC_RXM_DFX_STATUS15_MEM3_MSK)
+				>> HGC_RXM_DFX_STATUS15_MEM3_OFF);
+	}
+
+}
+
+static void multi_bit_ecc_error_process_v3_hw(struct hisi_hba *hisi_hba,
+		u32 irq_value)
+{
+	u32 reg_val;
+	struct device *dev = hisi_hba->dev;
+
+	if (irq_value & BIT(SAS_ECC_INTR_DQE_ECC_MB_OFF)) {
+		reg_val = hisi_sas_read32(hisi_hba, HGC_DQE_ECC_ADDR);
+		panic("%s: hgc_dqe_accbad_intr (0x%x) found:"
+		      " Ram address is 0x%08X\n",
+		      dev_name(dev), irq_value,
+		      (reg_val & HGC_DQE_ECC_MB_ADDR_MSK)
+		      >> HGC_DQE_ECC_MB_ADDR_OFF);
+	}
+
+	if (irq_value & BIT(SAS_ECC_INTR_IOST_ECC_MB_OFF)) {
+		reg_val = hisi_sas_read32(hisi_hba, HGC_IOST_ECC_ADDR);
+		panic("%s: hgc_iost_accbad_intr (0x%x) found:"
+		      " Ram address is 0x%08X\n",
+		      dev_name(dev), irq_value,
+		      (reg_val & HGC_IOST_ECC_MB_ADDR_MSK)
+		      >> HGC_IOST_ECC_MB_ADDR_OFF);
+	}
+
+	if (irq_value & BIT(SAS_ECC_INTR_ITCT_ECC_MB_OFF)) {
+		reg_val = hisi_sas_read32(hisi_hba, HGC_ITCT_ECC_ADDR);
+		panic("%s: hgc_itct_accbad_intr (0x%x) found:"
+		      " Ram address is 0x%08X\n",
+		      dev_name(dev), irq_value,
+		      (reg_val & HGC_ITCT_ECC_MB_ADDR_MSK)
+		      >> HGC_ITCT_ECC_MB_ADDR_OFF);
+	}
+
+	if (irq_value & BIT(SAS_ECC_INTR_IOSTLIST_ECC_MB_OFF)) {
+		reg_val = hisi_sas_read32(hisi_hba, HGC_LM_DFX_STATUS2);
+		panic("%s: hgc_iostl_accbad_intr (0x%x) found:"
+		      " memory address is 0x%08X\n",
+		      dev_name(dev), irq_value,
+		      (reg_val & HGC_LM_DFX_STATUS2_IOSTLIST_MSK)
+		      >> HGC_LM_DFX_STATUS2_IOSTLIST_OFF);
+	}
+
+	if (irq_value & BIT(SAS_ECC_INTR_ITCTLIST_ECC_MB_OFF)) {
+		reg_val = hisi_sas_read32(hisi_hba, HGC_LM_DFX_STATUS2);
+		panic("%s: hgc_itctl_accbad_intr (0x%x) found:"
+		      " memory address is 0x%08X\n",
+		      dev_name(dev), irq_value,
+		      (reg_val & HGC_LM_DFX_STATUS2_ITCTLIST_MSK)
+		      >> HGC_LM_DFX_STATUS2_ITCTLIST_OFF);
+	}
+
+	if (irq_value & BIT(SAS_ECC_INTR_CQE_ECC_MB_OFF)) {
+		reg_val = hisi_sas_read32(hisi_hba, HGC_CQE_ECC_ADDR);
+		panic("%s: hgc_cqe_accbad_intr (0x%x) found:"
+		      " Ram address is 0x%08X\n",
+		      dev_name(dev), irq_value,
+		      (reg_val & HGC_CQE_ECC_MB_ADDR_MSK)
+		      >> HGC_CQE_ECC_MB_ADDR_OFF);
+	}
+
+	if (irq_value & BIT(SAS_ECC_INTR_NCQ_MEM0_ECC_MB_OFF)) {
+		reg_val = hisi_sas_read32(hisi_hba, HGC_RXM_DFX_STATUS14);
+		panic("%s: rxm_mem0_accbad_intr (0x%x) found:"
+		      "memory address is 0x%08X\n",
+		      dev_name(dev), irq_value,
+		      (reg_val & HGC_RXM_DFX_STATUS14_MEM0_MSK)
+		      >> HGC_RXM_DFX_STATUS14_MEM0_OFF);
+	}
+
+	if (irq_value & BIT(SAS_ECC_INTR_NCQ_MEM1_ECC_MB_OFF)) {
+		reg_val = hisi_sas_read32(hisi_hba, HGC_RXM_DFX_STATUS14);
+		panic("%s: rxm_mem1_accbad_intr (0x%x) found:"
+		      " memory address is 0x%08X\n",
+		      dev_name(dev), irq_value,
+		      (reg_val & HGC_RXM_DFX_STATUS14_MEM1_MSK)
+		      >> HGC_RXM_DFX_STATUS14_MEM1_OFF);
+	}
+
+	if (irq_value & BIT(SAS_ECC_INTR_NCQ_MEM2_ECC_MB_OFF)) {
+		reg_val = hisi_sas_read32(hisi_hba, HGC_RXM_DFX_STATUS14);
+		panic("%s: rxm_mem2_accbad_intr (0x%x) found:"
+		      " memory address is 0x%08X\n",
+		      dev_name(dev), irq_value,
+		      (reg_val & HGC_RXM_DFX_STATUS14_MEM2_MSK)
+		      >> HGC_RXM_DFX_STATUS14_MEM2_OFF);
+	}
+
+	if (irq_value & BIT(SAS_ECC_INTR_NCQ_MEM3_ECC_MB_OFF)) {
+		reg_val = hisi_sas_read32(hisi_hba, HGC_RXM_DFX_STATUS15);
+		panic("%s: rxm_mem3_accbad_intr (0x%x) found:"
+		      " memory address is 0x%08X\n",
+		      dev_name(dev), irq_value,
+		      (reg_val & HGC_RXM_DFX_STATUS15_MEM3_MSK)
+		      >> HGC_RXM_DFX_STATUS15_MEM3_OFF);
+	}
+
+}
+
+static irqreturn_t fatal_ecc_int_v3_hw(int irq_no, struct hisi_hba *hisi_hba)
+{
+	u32 irq_value, irq_msk;
+
+	irq_msk = hisi_sas_read32(hisi_hba, SAS_ECC_INTR_MSK);
+	hisi_sas_write32(hisi_hba, SAS_ECC_INTR_MSK, irq_msk | 0xffffffff);
+
+	irq_value = hisi_sas_read32(hisi_hba, SAS_ECC_INTR);
+	if (irq_value) {
+		multi_bit_ecc_error_process_v3_hw(hisi_hba, irq_value);
+		one_bit_ecc_error_process_v3_hw(hisi_hba, irq_value);
+	}
+
+	hisi_sas_write32(hisi_hba, SAS_ECC_INTR, irq_value);
+	hisi_sas_write32(hisi_hba, SAS_ECC_INTR_MSK, irq_msk);
+
+	return IRQ_HANDLED;
+}
+
+#define AXI_ERR_NR	8
+static const char axi_err_info[AXI_ERR_NR][32] = {
+	"IOST_AXI_W_ERR",
+	"IOST_AXI_R_ERR",
+	"ITCT_AXI_W_ERR",
+	"ITCT_AXI_R_ERR",
+	"SATA_AXI_W_ERR",
+	"SATA_AXI_R_ERR",
+	"DQE_AXI_R_ERR",
+	"CQE_AXI_W_ERR"
+};
+
+#define FIFO_ERR_NR	5
+static const char fifo_err_info[FIFO_ERR_NR][32] = {
+	"CQE_WINFO_FIFO",
+	"CQE_MSG_FIFIO",
+	"GETDQE_FIFO",
+	"CMDP_FIFO",
+	"AWTCTRL_FIFO"
+};
+
+static irqreturn_t fatal_axi_int_v3_hw(int irq_no, struct hisi_hba *hisi_hba)
+{
+	u32 irq_value, irq_msk, err_value;
+	struct device *dev = hisi_hba->dev;
+
+	irq_msk = hisi_sas_read32(hisi_hba, ENT_INT_SRC_MSK3);
+	hisi_sas_write32(hisi_hba, ENT_INT_SRC_MSK3, irq_msk | 0xfffffffe);
+
+	irq_value = hisi_sas_read32(hisi_hba, ENT_INT_SRC3);
+	if (irq_value) {
+		if (irq_value & BIT(ENT_INT_SRC3_WP_DEPTH_OFF)) {
+			hisi_sas_write32(hisi_hba, ENT_INT_SRC3,
+					1 << ENT_INT_SRC3_WP_DEPTH_OFF);
+			panic("%s: write pointer and depth error (0x%x) found!\n",
+					dev_name(dev), irq_value);
+		}
+
+		if (irq_value & BIT(ENT_INT_SRC3_IPTT_SLOT_NOMATCH_OFF)) {
+			hisi_sas_write32(hisi_hba, ENT_INT_SRC3,
+				1 << ENT_INT_SRC3_IPTT_SLOT_NOMATCH_OFF);
+			panic("%s: iptt no match slot error (0x%x) found!\n",
+					dev_name(dev), irq_value);
+		}
+
+		if (irq_value & BIT(ENT_INT_SRC3_RP_DEPTH_OFF))
+			panic("%s: read pointer and depth error (0x%x) found!\n",
+					dev_name(dev), irq_value);
+
+		if (irq_value & BIT(ENT_INT_SRC3_AXI_OFF)) {
+			int i;
+
+			hisi_sas_write32(hisi_hba, ENT_INT_SRC3,
+					1 << ENT_INT_SRC3_AXI_OFF);
+			err_value = hisi_sas_read32(hisi_hba,
+						    HGC_AXI_FIFO_ERR_INFO);
+
+			for (i = 0; i < AXI_ERR_NR; i++) {
+				if (err_value & BIT(i))
+					panic("%s: %s (0x%x) found!\n",
+					      dev_name(dev),
+					      axi_err_info[i], irq_value);
+			}
+		}
+
+		if (irq_value & BIT(ENT_INT_SRC3_FIFO_OFF)) {
+			int i;
+
+			hisi_sas_write32(hisi_hba, ENT_INT_SRC3,
+					1 << ENT_INT_SRC3_FIFO_OFF);
+			err_value = hisi_sas_read32(hisi_hba,
+						    HGC_AXI_FIFO_ERR_INFO);
+
+			for (i = 0; i < FIFO_ERR_NR; i++) {
+				if (err_value & BIT(AXI_ERR_NR + i))
+					panic("%s: %s (0x%x) found!\n",
+					      dev_name(dev),
+					      fifo_err_info[i], irq_value);
+			}
+
+		}
+
+		if (irq_value & BIT(ENT_INT_SRC3_LM_OFF)) {
+			hisi_sas_write32(hisi_hba, ENT_INT_SRC3,
+					1 << ENT_INT_SRC3_LM_OFF);
+			panic("%s: LM add/fetch list error (0x%x) found!\n",
+					dev_name(dev), irq_value);
+		}
+
+		if (irq_value & BIT(ENT_INT_SRC3_ABT_OFF)) {
+			hisi_sas_write32(hisi_hba, ENT_INT_SRC3,
+					1 << ENT_INT_SRC3_ABT_OFF);
+			panic("%s: SAS_HGC_ABT fetch LM list error (0x%x) found!\n",
+					dev_name(dev), irq_value);
+		}
+	}
+
+	hisi_sas_write32(hisi_hba, ENT_INT_SRC_MSK3, irq_msk);
+
+	return IRQ_HANDLED;
+}
+
+static irqreturn_t fatal_interrupt_v3_hw(int irq_no, void *p)
+{
+	struct hisi_hba *hisi_hba = p;
+	u32 irq_value1, irq_value2;
+
+	irq_value1 = hisi_sas_read32(hisi_hba, ENT_INT_SRC3);
+	irq_value2 = hisi_sas_read32(hisi_hba, SAS_ECC_INTR);
+
+	if (irq_value1)
+		return fatal_axi_int_v3_hw(irq_no, hisi_hba);
+
+	if (irq_value2)
+		return fatal_ecc_int_v3_hw(irq_no, hisi_hba);
+
+	return IRQ_NONE;
+}
+
 static void slot_err_v3_hw(struct hisi_hba *hisi_hba,
 				struct sas_task *task,
 				struct hisi_sas_slot *slot)
@@ -1522,6 +1905,21 @@ static int interrupt_init_v3_hw(struct hisi_hba *hisi_hba)
 		}
 	}
 
+	irq = msi_vectors[11];
+	if (!irq) {
+		dev_err(dev, "irq init: fail map fatal interrupt 11\n");
+		return -ENOENT;
+	}
+
+	rc = devm_request_irq(dev, irq, fatal_interrupt_v3_hw, 0,
+			      DRV_NAME " fatal", hisi_hba);
+	if (rc) {
+		dev_err(dev,
+			"irq init: could not request fatal interrupt 11, rc=%d\n",
+			rc);
+		return -ENOENT;
+	}
+
 	for (i = 0; i < hisi_hba->queue_count; i++) {
 		int idx = i + 16; /* First cq interrupt is irq16 */
 		struct hisi_sas_cq *cq = &hisi_hba->cq[i];
-- 
1.9.1

  parent reply	other threads:[~2017-05-31 14:11 UTC|newest]

Thread overview: 30+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2017-05-31 14:32 [PATCH v3 00/23] hisi_sas: hip08 support John Garry
2017-05-31 14:32 ` [PATCH v3 01/23] scsi: hisi_sas: fix timeout check in hisi_sas_internal_task_abort() John Garry
2017-05-31 14:32 ` [PATCH v3 02/23] scsi: hisi_sas: define hisi_sas_device.device_id as int John Garry
2017-05-31 14:32 ` [PATCH v3 03/23] scsi: hisi_sas: optimise the usage of hisi_hba.lock John Garry
2017-05-31 14:32 ` [PATCH v3 04/23] scsi: hisi_sas: relocate get_ata_protocol() John Garry
2017-05-31 14:32 ` [PATCH v3 05/23] scsi: hisi_sas: relocate sata_done_v2_hw() John Garry
2017-05-31 14:32 ` [PATCH v3 06/23] scsi: hisi_sas: relocate get_ncq_tag_v2_hw() John Garry
2017-05-31 14:32 ` [PATCH v3 07/23] scsi: hisi_sas: add pci_dev in hisi_hba struct John Garry
2017-05-31 14:33 ` [PATCH v3 08/23] scsi: hisi_sas: create hisi_sas_get_fw_info() John Garry
2017-05-31 14:33 ` [PATCH v3 09/23] scsi: hisi_sas: add skeleton v3 hw driver John Garry
2017-05-31 14:33 ` [PATCH v3 10/23] scsi: hisi_sas: add initialisation for v3 pci-based controller John Garry
2017-05-31 14:33 ` [PATCH v3 11/23] scsi: hisi_sas: add v3 hw init John Garry
2017-05-31 14:33 ` [PATCH v3 12/23] scsi: hisi_sas: add v3 hw PHY init John Garry
2017-05-31 14:33 ` [PATCH v3 13/23] scsi: hisi_sas: add phy up/down/bcast and channel ISR John Garry
2017-06-01  5:41   ` Christoph Hellwig
2017-06-01 10:10     ` John Garry
2017-05-31 14:33 ` [PATCH v3 14/23] scsi: hisi_sas: add v3 cq interrupt handler John Garry
2017-06-01  5:41   ` Christoph Hellwig
2017-06-01 10:36     ` John Garry
2017-06-08  7:34       ` Christoph Hellwig
2017-06-08 12:09         ` John Garry
2017-05-31 14:33 ` [PATCH v3 15/23] scsi: hisi_sas: add v3 code to send SSP frame John Garry
2017-05-31 14:33 ` [PATCH v3 16/23] scsi: hisi_sas: add v3 code to send SMP frame John Garry
2017-05-31 14:33 ` [PATCH v3 17/23] scsi: hisi_sas: add v3 code to send ATA frame John Garry
2017-05-31 14:33 ` [PATCH v3 18/23] scsi: hisi_sas: add v3 code for itct setup and free John Garry
2017-05-31 14:33 ` [PATCH v3 19/23] scsi: hisi_sas: add v3 code to send internal abort command John Garry
2017-05-31 14:33 ` [PATCH v3 20/23] scsi: hisi_sas: add get_wideport_bitmap_v3_hw() John Garry
2017-05-31 14:33 ` John Garry [this message]
2017-05-31 14:33 ` [PATCH v3 22/23] scsi: hisi_sas: add v3 code to fill some more hw function pointers John Garry
2017-05-31 14:33 ` [PATCH v3 23/23] scsi: hisi_sas: modify internal abort dev flow for v3 hw John Garry

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1496241195-217678-22-git-send-email-john.garry@huawei.com \
    --to=john.garry@huawei.com \
    --cc=arnd@arndb.de \
    --cc=chenxiang66@hisilicon.com \
    --cc=jejb@linux.vnet.ibm.com \
    --cc=john.garry2@mail.dcu.ie \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-scsi@vger.kernel.org \
    --cc=linuxarm@huawei.com \
    --cc=martin.petersen@oracle.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox

all inboxes | Powered by JetHome®