From: Jeremy Kerr <jk@ozlabs.org>
To: linux-kernel@vger.kernel.org
Cc: Joel Stanley <joel@jms.id.au>,
Christopher Bostic <cbostic@linux.vnet.ibm.com>,
Jeremy Kerr <jk@ozlabs.org>
Subject: [PATCH v2 3/3] fsi/master-gpio: Add external mode
Date: Thu, 22 Jun 2017 06:10:22 +0800 [thread overview]
Message-ID: <1498083022-24907-1-git-send-email-jk@ozlabs.org> (raw)
In-Reply-To: <1497864405-26990-4-git-send-email-jk@ozlabs.org>
This change introduces an 'external mode' for GPIO-based FSI masters,
allowing the clock and data lines to be driven by an external source.
For example, external mode is selected by a user when an external debug
device is attached to the FSI pins.
To do this, we need to set specific states for the trans, mux and enable
gpios, and prevent access to clk & data from the FSI core code (by
returning EBUSY).
External mode is controlled by a sysfs attribute, so add the relevent
information to Documentation/ABI/
Signed-off-by: Jeremy Kerr <jk@ozlabs.org>
Reviewed-by: Joel Stanley <joel@jms.id.au>
---
.../ABI/testing/sysfs-driver-fsi-master-gpio | 10 +++
drivers/fsi/fsi-master-gpio.c | 78 +++++++++++++++++++++-
2 files changed, 86 insertions(+), 2 deletions(-)
create mode 100644 Documentation/ABI/testing/sysfs-driver-fsi-master-gpio
diff --git a/Documentation/ABI/testing/sysfs-driver-fsi-master-gpio b/Documentation/ABI/testing/sysfs-driver-fsi-master-gpio
new file mode 100644
index 0000000..9667bb4
--- /dev/null
+++ b/Documentation/ABI/testing/sysfs-driver-fsi-master-gpio
@@ -0,0 +1,10 @@
+What: /sys/bus/platform/devices/[..]/fsi-master-gpio/external_mode
+Date: June 2017
+KernelVersion: 4.12
+Contact: jk@ozlabs.org
+Description:
+ Controls access arbitration for GPIO-based FSI master. A
+ value of 0 (the default) sets normal mode, where the
+ driver performs FSI bus transactions, 1 sets external mode,
+ where the FSI bus is driven externally (for example, by
+ a debug device).
diff --git a/drivers/fsi/fsi-master-gpio.c b/drivers/fsi/fsi-master-gpio.c
index a6d602e..b54c213 100644
--- a/drivers/fsi/fsi-master-gpio.c
+++ b/drivers/fsi/fsi-master-gpio.c
@@ -59,6 +59,7 @@ struct fsi_master_gpio {
struct gpio_desc *gpio_trans; /* Voltage translator */
struct gpio_desc *gpio_enable; /* FSI enable */
struct gpio_desc *gpio_mux; /* Mux control */
+ bool external_mode;
};
#define CREATE_TRACE_POINTS
@@ -411,6 +412,12 @@ static int fsi_master_gpio_xfer(struct fsi_master_gpio *master, uint8_t slave,
int rc;
spin_lock_irqsave(&master->cmd_lock, flags);
+
+ if (master->external_mode) {
+ spin_unlock_irqrestore(&master->cmd_lock, flags);
+ return -EBUSY;
+ }
+
serial_out(master, cmd);
echo_delay(master);
rc = poll_for_response(master, slave, resp_len, resp);
@@ -469,6 +476,10 @@ static int fsi_master_gpio_break(struct fsi_master *_master, int link)
trace_fsi_master_gpio_break(master);
spin_lock_irqsave(&master->cmd_lock, flags);
+ if (master->external_mode) {
+ spin_unlock_irqrestore(&master->cmd_lock, flags);
+ return -EBUSY;
+ }
set_sda_output(master, 1);
sda_out(master, 1);
clock_toggle(master, FSI_PRE_BREAK_CLOCKS);
@@ -497,25 +508,84 @@ static void fsi_master_gpio_init(struct fsi_master_gpio *master)
clock_zeros(master, FSI_INIT_CLOCKS);
}
+static void fsi_master_gpio_init_external(struct fsi_master_gpio *master)
+{
+ gpiod_direction_output(master->gpio_mux, 0);
+ gpiod_direction_output(master->gpio_trans, 0);
+ gpiod_direction_output(master->gpio_enable, 1);
+ gpiod_direction_input(master->gpio_clk);
+ gpiod_direction_input(master->gpio_data);
+}
+
static int fsi_master_gpio_link_enable(struct fsi_master *_master, int link)
{
struct fsi_master_gpio *master = to_fsi_master_gpio(_master);
unsigned long flags;
+ int rc = -EBUSY;
if (link != 0)
return -ENODEV;
spin_lock_irqsave(&master->cmd_lock, flags);
- gpiod_set_value(master->gpio_enable, 1);
+ if (!master->external_mode) {
+ gpiod_set_value(master->gpio_enable, 1);
+ rc = 0;
+ }
spin_unlock_irqrestore(&master->cmd_lock, flags);
- return 0;
+ return rc;
+}
+
+static ssize_t external_mode_show(struct device *dev,
+ struct device_attribute *attr, char *buf)
+{
+ struct fsi_master_gpio *master = dev_get_drvdata(dev);
+
+ return snprintf(buf, PAGE_SIZE - 1, "%u\n",
+ master->external_mode ? 1 : 0);
+}
+
+static ssize_t external_mode_store(struct device *dev,
+ struct device_attribute *attr, const char *buf, size_t count)
+{
+ struct fsi_master_gpio *master = dev_get_drvdata(dev);
+ unsigned long flags, val;
+ bool external_mode;
+ int err;
+
+ err = kstrtoul(buf, 0, &val);
+ if (err)
+ return err;
+
+ external_mode = !!val;
+
+ spin_lock_irqsave(&master->cmd_lock, flags);
+
+ if (external_mode == master->external_mode) {
+ spin_unlock_irqrestore(&master->cmd_lock, flags);
+ return count;
+ }
+
+ master->external_mode = external_mode;
+ if (master->external_mode)
+ fsi_master_gpio_init_external(master);
+ else
+ fsi_master_gpio_init(master);
+ spin_unlock_irqrestore(&master->cmd_lock, flags);
+
+ fsi_master_rescan(&master->master);
+
+ return count;
}
+static DEVICE_ATTR(external_mode, 0664,
+ external_mode_show, external_mode_store);
+
static int fsi_master_gpio_probe(struct platform_device *pdev)
{
struct fsi_master_gpio *master;
struct gpio_desc *gpio;
+ int rc;
master = devm_kzalloc(&pdev->dev, sizeof(*master), GFP_KERNEL);
if (!master)
@@ -572,6 +642,10 @@ static int fsi_master_gpio_probe(struct platform_device *pdev)
fsi_master_gpio_init(master);
+ rc = device_create_file(&pdev->dev, &dev_attr_external_mode);
+ if (rc)
+ return rc;
+
return fsi_master_register(&master->master);
}
--
2.7.4
next prev parent reply other threads:[~2017-06-21 22:10 UTC|newest]
Thread overview: 11+ messages / expand[flat|nested] mbox.gz Atom feed top
2017-06-19 9:26 [PATCH 0/3] Add 'external mode' for GPIO-based FSI master Jeremy Kerr
2017-06-19 9:26 ` [PATCH 1/3] fsi: Add fsi_master_rescan() Jeremy Kerr
2017-06-20 2:59 ` [PATCH v2 " Jeremy Kerr
2017-06-19 9:26 ` [PATCH 2/3] fsi/master-gpio: Add locking around gpio operations during break & link enable Jeremy Kerr
2017-06-19 9:26 ` [PATCH 3/3] fsi/master-gpio: Add external mode Jeremy Kerr
2017-06-19 17:17 ` kbuild test robot
2017-06-21 6:01 ` Joel Stanley
2017-06-21 22:07 ` Jeremy Kerr
2017-06-21 22:10 ` Jeremy Kerr [this message]
2018-01-30 4:45 ` [PATCH v2 " Joel Stanley
2017-09-04 6:55 ` [PATCH 0/3] Add 'external mode' for GPIO-based FSI master Joel Stanley
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1498083022-24907-1-git-send-email-jk@ozlabs.org \
--to=jk@ozlabs.org \
--cc=cbostic@linux.vnet.ibm.com \
--cc=joel@jms.id.au \
--cc=linux-kernel@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®