[PATCH 12/14] clk: tegra: Fix T210 PLLRE registration

[Peter De Schrijver <pdeschrijver@nvidia.com>]

From: Alex Frid <afrid@nvidia.com>

Switched Tegra210 PLLRE registration to common PLL ops instead of special
PLLRE ops used on previous Tegra chips. The latter ops do not follow
chip specific PLL frequency table, and do not apply chip specific rate
calculation method.

Removed unnecessary default rate setting that duplicates h/w reset
state, and is overwritten by clock initialization, anyway.

Signed-off-by: Alex Frid <afrid@nvidia.com>
Reviewed-by: Peter De Schrijver <pdeschrijver@nvidia.com>
Reviewed-by: Jon Mayo <jmayo@nvidia.com>
---
 drivers/clk/tegra/clk-pll.c | 21 +--------------------
 1 file changed, 1 insertion(+), 20 deletions(-)

diff --git a/drivers/clk/tegra/clk-pll.c b/drivers/clk/tegra/clk-pll.c
index c6bce4a..7c369e2 100644
--- a/drivers/clk/tegra/clk-pll.c
+++ b/drivers/clk/tegra/clk-pll.c
@@ -2355,7 +2355,6 @@ struct clk *tegra_clk_register_pllre_tegra210(const char *name,
 			  struct tegra_clk_pll_params *pll_params,
 			  spinlock_t *lock, unsigned long parent_rate)
 {
-	u32 val;
 	struct tegra_clk_pll *pll;
 	struct clk *clk;
 
@@ -2369,26 +2368,8 @@ struct clk *tegra_clk_register_pllre_tegra210(const char *name,
 	if (IS_ERR(pll))
 		return ERR_CAST(pll);
 
-	/* program minimum rate by default */
-
-	val = pll_readl_base(pll);
-	if (val & PLL_BASE_ENABLE)
-		WARN_ON(readl_relaxed(clk_base + pll_params->iddq_reg) &
-				BIT(pll_params->iddq_bit_idx));
-	else {
-		val = 0x4 << divm_shift(pll);
-		val |= 0x41 << divn_shift(pll);
-		pll_writel_base(val, pll);
-	}
-
-	/* disable lock override */
-
-	val = pll_readl_misc(pll);
-	val &= ~BIT(29);
-	pll_writel_misc(val, pll);
-
 	clk = _tegra_clk_register_pll(pll, name, parent_name, flags,
-				      &tegra_clk_pllre_ops);
+				      &tegra_clk_pll_ops);
 	if (IS_ERR(clk))
 		kfree(pll);
 
-- 
1.9.1