[PATCH] usb: gadget: core: fix ->udc_set_speed() logic

[PATCH] usb: gadget: core: fix ->udc_set_speed() logic

[Roger Quadros]

Consider the following case: udc controller supports SuperSpeed.
If we first load a HighSpeed gadget followed by a SuperSpeed gadget,
the SuperSpeed gadget will be limited to HighSpeed as UDC core
driver doesn't call ->udc_set_speed() in the second case.

Call ->udc_set_speed() unconditionally to fix this issue.

This will also fix the case for dwc3 controller driver when SuperSpeed
gadget is loaded first and works in HighSpeed only as udc_set_speed()
was never being called.

Fixes: 6099eca796ae ("usb: gadget: core: introduce ->udc_set_speed() method")
Cc: <stable@vger.kernel.org> [v4.13+]
Signed-off-by: Roger Quadros <rogerq@ti.com>
---
 drivers/usb/gadget/udc/core.c | 3 +--
 1 file changed, 1 insertion(+), 2 deletions(-)

diff --git a/drivers/usb/gadget/udc/core.c b/drivers/usb/gadget/udc/core.c
index 75c51ca..d41d07a 100644
--- a/drivers/usb/gadget/udc/core.c
+++ b/drivers/usb/gadget/udc/core.c
@@ -1320,8 +1320,7 @@ static int udc_bind_to_driver(struct usb_udc *udc, struct usb_gadget_driver *dri
 	udc->dev.driver = &driver->driver;
 	udc->gadget->dev.driver = &driver->driver;
 
-	if (driver->max_speed < udc->gadget->max_speed)
-		usb_gadget_udc_set_speed(udc, driver->max_speed);
+	usb_gadget_udc_set_speed(udc, driver->max_speed);
 
 	ret = driver->bind(udc->gadget, driver);
 	if (ret)
-- 
2.7.4


Texas Instruments Finland Oy, Porkkalankatu 22, 00180 Helsinki. Y-tunnus/Business ID: 0615521-4. Kotipaikka/Domicile: Helsinki