From: Sudeep Holla <sudeep.holla@arm.com>
To: ALKML <linux-arm-kernel@lists.infradead.org>,
LKML <linux-kernel@vger.kernel.org>,
DTML <devicetree@vger.kernel.org>
Cc: Sudeep Holla <sudeep.holla@arm.com>,
Roy Franz <roy.franz@cavium.com>,
Harb Abdulhamid <harba@codeaurora.org>,
Nishanth Menon <nm@ti.com>, Arnd Bergmann <arnd@arndb.de>,
Loc Ho <lho@apm.com>, Alexey Klimov <alexey.klimov@arm.com>,
Ryan Harkin <Ryan.Harkin@arm.com>,
Jassi Brar <jassisinghbrar@gmail.com>
Subject: [PATCH v3 13/22] firmware: arm_scmi: refactor in preparation to support per-protocol channels
Date: Thu, 28 Sep 2017 14:11:37 +0100 [thread overview]
Message-ID: <1506604306-20739-14-git-send-email-sudeep.holla@arm.com> (raw)
In-Reply-To: <1506604306-20739-1-git-send-email-sudeep.holla@arm.com>
In order to support per-protocol channels if available, we need to
factor out all the mailbox channel information(Tx/Rx payload and
channel handle) out of the main SCMI instance information structure.
This patch refactors the existing channel information into a separate
chan_info structure.
Cc: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
---
drivers/firmware/arm_scmi/driver.c | 84 ++++++++++++++++++++++++--------------
1 file changed, 54 insertions(+), 30 deletions(-)
diff --git a/drivers/firmware/arm_scmi/driver.c b/drivers/firmware/arm_scmi/driver.c
index e1abedf15cb0..93b3bd8d437f 100644
--- a/drivers/firmware/arm_scmi/driver.c
+++ b/drivers/firmware/arm_scmi/driver.c
@@ -104,6 +104,22 @@ struct scmi_desc {
};
/**
+ * struct scmi_chan_info - Structure representing a SCMI channel informfation
+ *
+ * @cl: Mailbox Client
+ * @chan: Transmit/Receive mailbox channel
+ * @payload: Transmit/Receive mailbox channel payload area
+ * @dev: Reference to device in the SCMI hierarchy corresponding to this
+ * channel
+ */
+struct scmi_chan_info {
+ struct mbox_client cl;
+ struct mbox_chan *chan;
+ void __iomem *payload;
+ struct device *dev;
+};
+
+/**
* struct scmi_info - Structure representing a SCMI instance
*
* @dev: Device pointer
@@ -111,10 +127,8 @@ struct scmi_desc {
* @handle: Instance of SCMI handle to send to clients
* @version: SCMI revision information containing protocol version,
* implementation version and (sub-)vendor identification.
- * @cl: Mailbox Client
- * @tx_chan: Transmit mailbox channel
- * @tx_payload: Transmit mailbox channel payload area
* @minfo: Message info
+ * @tx_cinfo: Reference to SCMI channel information
* @protocols_imp: list of protocols implemented, currently maximum of
* MAX_PROTOCOLS_IMP elements allocated by the base protocol
* @node: list head
@@ -125,16 +139,14 @@ struct scmi_info {
const struct scmi_desc *desc;
struct scmi_revision_info version;
struct scmi_handle handle;
- struct mbox_client cl;
- struct mbox_chan *tx_chan;
- void __iomem *tx_payload;
struct scmi_xfers_info minfo;
+ struct scmi_chan_info *tx_cinfo;
u8 *protocols_imp;
struct list_head node;
int users;
};
-#define client_to_scmi_info(c) container_of(c, struct scmi_info, cl)
+#define client_to_scmi_chan_info(c) container_of(c, struct scmi_chan_info, cl)
#define handle_to_scmi_info(h) container_of(h, struct scmi_info, handle)
/*
@@ -224,10 +236,11 @@ static void scmi_rx_callback(struct mbox_client *cl, void *m)
{
u16 xfer_id;
struct scmi_xfer *xfer;
- struct scmi_info *info = client_to_scmi_info(cl);
+ struct scmi_chan_info *cinfo = client_to_scmi_chan_info(cl);
+ struct device *dev = cinfo->dev;
+ struct scmi_info *info = dev_get_drvdata(dev);
struct scmi_xfers_info *minfo = &info->minfo;
- struct device *dev = info->dev;
- struct scmi_shared_mem *mem = info->tx_payload;
+ struct scmi_shared_mem *mem = cinfo->payload;
xfer_id = MSG_XTRACT_TOKEN(le32_to_cpu(mem->msg_header));
@@ -278,8 +291,8 @@ static inline u32 pack_scmi_header(struct scmi_msg_hdr *hdr)
static void scmi_tx_prepare(struct mbox_client *cl, void *m)
{
struct scmi_xfer *t = m;
- struct scmi_info *info = client_to_scmi_info(cl);
- struct scmi_shared_mem *mem = info->tx_payload;
+ struct scmi_chan_info *cinfo = client_to_scmi_chan_info(cl);
+ struct scmi_shared_mem *mem = cinfo->payload;
mem->channel_status = 0x0; /* Mark channel busy + clear error */
mem->flags = t->hdr.poll_completion ? 0 :
@@ -371,9 +384,9 @@ void scmi_one_xfer_put(const struct scmi_handle *handle, struct scmi_xfer *xfer)
}
static bool
-scmi_xfer_poll_done(const struct scmi_info *info, struct scmi_xfer *xfer)
+scmi_xfer_poll_done(const struct scmi_chan_info *cinfo, struct scmi_xfer *xfer)
{
- struct scmi_shared_mem *mem = info->tx_payload;
+ struct scmi_shared_mem *mem = cinfo->payload;
u16 xfer_id = MSG_XTRACT_TOKEN(le32_to_cpu(mem->msg_header));
if (xfer->hdr.seq != xfer_id)
@@ -400,8 +413,9 @@ int scmi_do_xfer(const struct scmi_handle *handle, struct scmi_xfer *xfer)
int timeout;
struct scmi_info *info = handle_to_scmi_info(handle);
struct device *dev = info->dev;
+ struct scmi_chan_info *cinfo = info->tx_cinfo;
- ret = mbox_send_message(info->tx_chan, xfer);
+ ret = mbox_send_message(cinfo->chan, xfer);
if (ret < 0) {
dev_dbg(dev, "mbox send fail %d\n", ret);
return ret;
@@ -412,10 +426,10 @@ int scmi_do_xfer(const struct scmi_handle *handle, struct scmi_xfer *xfer)
if (xfer->hdr.poll_completion) {
timeout = info->desc->max_rx_timeout_ms * 100;
- while (!scmi_xfer_poll_done(info, xfer) && timeout--)
+ while (!scmi_xfer_poll_done(cinfo, xfer) && timeout--)
udelay(10);
if (timeout)
- scmi_fetch_response(xfer, info->tx_payload);
+ scmi_fetch_response(xfer, cinfo->payload);
else
ret = -ETIMEDOUT;
} else {
@@ -435,7 +449,7 @@ int scmi_do_xfer(const struct scmi_handle *handle, struct scmi_xfer *xfer)
* Unfortunately, we have to kick the mailbox framework after we have
* received our message.
*/
- mbox_client_txdone(info->tx_chan, ret);
+ mbox_client_txdone(cinfo->chan, ret);
return ret;
}
@@ -757,11 +771,11 @@ static int scmi_mailbox_check(struct device_node *np)
return of_parse_phandle_with_args(np, "mboxes", "#mbox-cells", 0, &arg);
}
-static int scmi_mbox_free_channel(struct scmi_info *info)
+static int scmi_mbox_free_channel(struct scmi_chan_info *cinfo)
{
- if (!IS_ERR_OR_NULL(info->tx_chan)) {
- mbox_free_channel(info->tx_chan);
- info->tx_chan = NULL;
+ if (!IS_ERR_OR_NULL(cinfo->chan)) {
+ mbox_free_channel(cinfo->chan);
+ cinfo->chan = NULL;
}
return 0;
@@ -783,7 +797,7 @@ static int scmi_remove(struct platform_device *pdev)
if (!ret)
/* Safe to free channels since no more users */
- return scmi_mbox_free_channel(info);
+ return scmi_mbox_free_channel(info->tx_cinfo);
return ret;
}
@@ -795,9 +809,17 @@ static inline int scmi_mbox_chan_setup(struct scmi_info *info)
resource_size_t size;
struct device *dev = info->dev;
struct device_node *shmem, *np = dev->of_node;
+ struct scmi_chan_info *cinfo;
struct mbox_client *cl;
- cl = &info->cl;
+ cinfo = devm_kzalloc(info->dev, sizeof(*cinfo), GFP_KERNEL);
+ if (!cinfo)
+ return -ENOMEM;
+
+ info->tx_cinfo = cinfo;
+ cinfo->dev = dev;
+
+ cl = &cinfo->cl;
cl->dev = dev;
cl->rx_callback = scmi_rx_callback;
cl->tx_prepare = scmi_tx_prepare;
@@ -813,16 +835,16 @@ static inline int scmi_mbox_chan_setup(struct scmi_info *info)
}
size = resource_size(&res);
- info->tx_payload = devm_ioremap(dev, res.start, size);
- if (!info->tx_payload) {
+ cinfo->payload = devm_ioremap(info->dev, res.start, size);
+ if (!cinfo->payload) {
dev_err(dev, "failed to ioremap SCMI Tx payload\n");
return -EADDRNOTAVAIL;
}
/* Transmit channel is first entry i.e. index 0 */
- info->tx_chan = mbox_request_channel(cl, 0);
- if (IS_ERR(info->tx_chan)) {
- ret = PTR_ERR(info->tx_chan);
+ cinfo->chan = mbox_request_channel(cl, 0);
+ if (IS_ERR(cinfo->chan)) {
+ ret = PTR_ERR(cinfo->chan);
if (ret != -EPROBE_DEFER)
dev_err(dev, "failed to request SCMI Tx mailbox\n");
return ret;
@@ -844,6 +866,8 @@ scmi_create_protocol_device(struct device_node *np, struct scmi_info *info,
return;
}
+ platform_set_drvdata(cdev, info);
+
init_ret = match->fn(&info->handle);
if (init_ret) {
dev_err(info->dev, "SCMI protocol %d init error %d\n",
@@ -894,7 +918,7 @@ static int scmi_probe(struct platform_device *pdev)
ret = scmi_base_protocol_init(handle);
if (ret) {
dev_err(dev, "unable to communicate with SCMI(%d)\n", ret);
- scmi_mbox_free_channel(info);
+ scmi_mbox_free_channel(info->tx_cinfo);
return ret;
}
--
2.7.4
next prev parent reply other threads:[~2017-09-28 13:16 UTC|newest]
Thread overview: 83+ messages / expand[flat|nested] mbox.gz Atom feed top
2017-09-28 13:11 [PATCH v3 00/22] firmware: ARM System Control and Management Interface(SCMI) support Sudeep Holla
2017-09-28 13:11 ` [PATCH v3 01/22] dt-bindings: mailbox: add support for mailbox client shared memory Sudeep Holla
2017-09-28 13:11 ` [PATCH v3 02/22] dt-bindings: arm: add support for ARM System Control and Management Interface(SCMI) protocol Sudeep Holla
2017-10-04 10:50 ` Arnd Bergmann
2017-10-04 11:07 ` Sudeep Holla
2017-10-04 12:35 ` Arnd Bergmann
2017-10-04 13:53 ` Sudeep Holla
2017-10-04 14:17 ` Arnd Bergmann
2017-10-04 14:47 ` Sudeep Holla
2017-10-05 11:56 ` Arnd Bergmann
2017-10-05 12:56 ` Sudeep Holla
2017-10-05 13:20 ` Jassi Brar
2017-10-05 14:10 ` Sudeep Holla
2017-09-28 13:11 ` [PATCH v3 03/22] dt-bindings: arm: scmi: add ARM MHU specific mailbox client bindings Sudeep Holla
2017-10-05 23:20 ` Rob Herring
2017-10-06 9:42 ` Sudeep Holla
2017-10-06 11:01 ` Jassi Brar
2017-10-06 15:54 ` Rob Herring
2017-10-07 2:26 ` Jassi Brar
2017-10-09 13:52 ` Rob Herring
2017-10-09 14:37 ` Sudeep Holla
2017-10-09 14:46 ` Jassi Brar
2017-10-09 22:57 ` Rob Herring
2017-10-10 1:52 ` Jassi Brar
2017-10-10 11:04 ` Sudeep Holla
2017-09-28 13:11 ` [PATCH v3 04/22] firmware: arm_scmi: add basic driver infrastructure for SCMI Sudeep Holla
2017-10-04 10:59 ` Arnd Bergmann
2017-10-04 17:37 ` Sudeep Holla
2017-10-04 11:19 ` Arnd Bergmann
2017-09-28 13:11 ` [PATCH v3 05/22] firmware: arm_scmi: add common infrastructure and support for base protocol Sudeep Holla
2017-09-28 13:11 ` [PATCH v3 06/22] firmware: arm_scmi: add initial support for performance protocol Sudeep Holla
2017-09-28 13:11 ` [PATCH v3 07/22] firmware: arm_scmi: add initial support for clock protocol Sudeep Holla
2017-09-28 13:11 ` [PATCH v3 08/22] firmware: arm_scmi: add initial support for power protocol Sudeep Holla
2017-09-28 13:11 ` [PATCH v3 09/22] firmware: arm_scmi: add initial support for sensor protocol Sudeep Holla
2017-09-28 13:11 ` [PATCH v3 10/22] firmware: arm_scmi: probe and initialise all the supported protocols Sudeep Holla
2017-10-04 11:06 ` Arnd Bergmann
2017-09-28 13:11 ` [PATCH v3 11/22] firmware: arm_scmi: add support for polling based SCMI transfers Sudeep Holla
2017-10-04 11:13 ` Arnd Bergmann
2017-10-04 11:18 ` Sudeep Holla
2017-09-28 13:11 ` [PATCH v3 12/22] firmware: arm_scmi: add option for polling based performance domain operations Sudeep Holla
2017-09-28 13:11 ` Sudeep Holla [this message]
2017-09-28 13:11 ` [PATCH v3 14/22] firmware: arm_scmi: add per-protocol channels support using idr objects Sudeep Holla
2017-09-28 13:11 ` [PATCH v3 15/22] firmware: arm_scmi: abstract mailbox interface Sudeep Holla
2017-10-04 11:24 ` Arnd Bergmann
2017-10-04 11:32 ` Sudeep Holla
2017-10-06 11:34 ` Jassi Brar
2017-10-06 13:27 ` Sudeep Holla
2017-10-06 13:34 ` Jassi Brar
2017-10-06 13:41 ` Sudeep Holla
2017-10-12 21:20 ` Bjorn Andersson
2017-09-28 13:11 ` [PATCH v3 16/22] firmware: arm_scmi: add arm_mhu specific " Sudeep Holla
2017-10-04 11:36 ` Arnd Bergmann
2017-10-04 11:48 ` Sudeep Holla
2017-10-06 11:26 ` Jassi Brar
2017-10-06 13:32 ` Sudeep Holla
2017-10-06 13:47 ` Jassi Brar
2017-10-06 13:51 ` Sudeep Holla
2017-10-12 21:03 ` Bjorn Andersson
2017-10-13 13:42 ` Sudeep Holla
2017-10-13 14:12 ` Jassi Brar
2017-10-13 14:47 ` Sudeep Holla
2017-10-13 15:19 ` Jassi Brar
2017-09-28 13:11 ` [PATCH v3 17/22] firmware: arm_scmi: add device power domain support using genpd Sudeep Holla
2017-09-28 21:18 ` Ulf Hansson
2017-09-29 13:40 ` Sudeep Holla
2017-09-29 13:42 ` [PATCH v3 17/22][UPDATE] firmware: arm_scmi: add device power domain support genpd Sudeep Holla
2017-10-10 11:05 ` Ulf Hansson
2017-10-10 13:02 ` Sudeep Holla
2017-09-28 13:11 ` [PATCH v3 18/22] clk: add support for clocks provided by SCMI Sudeep Holla
2017-11-02 7:23 ` Stephen Boyd
2017-11-02 10:04 ` Sudeep Holla
2017-11-03 15:12 ` Stephen Boyd
2017-09-28 13:11 ` [PATCH v3 19/22] hwmon: (core) Add hwmon_max to hwmon_sensor_types enumeration Sudeep Holla
2017-10-01 14:21 ` [v3, " Guenter Roeck
2017-09-28 13:11 ` [PATCH v3 20/22] hwmon: add support for sensors exported via ARM SCMI Sudeep Holla
2017-10-01 14:26 ` [v3,20/22] " Guenter Roeck
2017-10-02 9:25 ` Sudeep Holla
2017-09-28 13:11 ` [PATCH v3 21/22] cpufreq: add support for CPU DVFS based on SCMI message protocol Sudeep Holla
2017-10-04 11:30 ` Arnd Bergmann
2017-10-04 15:01 ` Sudeep Holla
2017-10-05 11:20 ` Arnd Bergmann
2017-10-05 11:26 ` Sudeep Holla
2017-09-28 13:11 ` [PATCH v3 22/22] cpufreq: scmi: add support for fast frequency switching Sudeep Holla
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1506604306-20739-14-git-send-email-sudeep.holla@arm.com \
--to=sudeep.holla@arm.com \
--cc=Ryan.Harkin@arm.com \
--cc=alexey.klimov@arm.com \
--cc=arnd@arndb.de \
--cc=devicetree@vger.kernel.org \
--cc=harba@codeaurora.org \
--cc=jassisinghbrar@gmail.com \
--cc=lho@apm.com \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=nm@ti.com \
--cc=roy.franz@cavium.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®