mirror of https://lore.kernel.org/lkml/
 help / color / mirror / Atom feed
* [PATCH 2/2] hwmon: (w83773g) Add documentation
@ 2017-11-02  6:36 Lei YU
  0 siblings, 0 replies; only message in thread
From: Lei YU @ 2017-11-02  6:36 UTC (permalink / raw)
  To: Jean Delvare, Guenter Roeck
  Cc: Lei YU, linux-kernel, linux-hwmon, Joel Stanley, Andrew Jeffery

Add documentation for the w83773g driver.

Signed-off-by: Lei YU <mine260309@gmail.com>
---
 Documentation/hwmon/w83773g | 28 ++++++++++++++++++++++++++++
 1 file changed, 28 insertions(+)
 create mode 100644 Documentation/hwmon/w83773g

diff --git a/Documentation/hwmon/w83773g b/Documentation/hwmon/w83773g
new file mode 100644
index 0000000..da28731
--- /dev/null
+++ b/Documentation/hwmon/w83773g
@@ -0,0 +1,28 @@
+Kernel driver w83773g
+====================
+
+Supported chips:
+  * Nuvoton W83773G
+    Prefix: 'w83773g'
+    Addresses scanned: I2C 0x4c and 0x4d
+    Datasheet: https://www.nuvoton.com/resource-files/W83773G_SG_DatasheetV1_2.pdf
+
+Authors:
+	Lei YU <mine260309@gmail.com>
+
+Description
+-----------
+
+This driver implements support for Nuvoton W83773G temperature sensor
+chip. This chip implements one local and two remote sensors.
+Temperature is measured in degrees Celsius.
+The chip is wired over I2C/SMBus and specified over a temperature
+range of -40 to +125 degrees Celsius (for local sensor) and -40 to +127
+degrees Celsius (for remote sensors).
+Resolution for both the local and remote channels is 0.125 degree C.
+
+The chip supports only temperature measurement. The driver exports
+the temperature values via the following sysfs files:
+
+temp[1-3]_input
+temp[2-3]_fault
-- 
1.9.1

^ permalink raw reply	[flat|nested] only message in thread

only message in thread, other threads:[~2017-11-02  6:37 UTC | newest]

Thread overview: (only message) (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2017-11-02  6:36 [PATCH 2/2] hwmon: (w83773g) Add documentation Lei YU

This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox

all inboxes | Powered by JetHome®