From: Neil Armstrong <narmstrong@baylibre.com>
To: shawnguo@kernel.org, kernel@pengutronix.de, fabio.estevam@nxp.com
Cc: Neil Armstrong <narmstrong@baylibre.com>,
linux-arm-kernel@lists.infradead.org,
linux-kernel@vger.kernel.org
Subject: [PATCH v4 1/6] ARM: dts: imx6qdl-pinfunc: Add missing MX6QDL_PAD_ENET_RXD0__OSC32K_32K_OUT
Date: Wed, 29 Nov 2017 11:20:52 +0100 [thread overview]
Message-ID: <1511950857-19292-2-git-send-email-narmstrong@baylibre.com> (raw)
In-Reply-To: <1511950857-19292-1-git-send-email-narmstrong@baylibre.com>
Add missing pinmux entry for OSC32K_32K_OUT on pad ENET_RXD0 used by the
Variscite DART-MX6 SoM.
Reviewed-by: Fabio Estevam <fabio.estevam@nxp.com>
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
---
arch/arm/boot/dts/imx6dl-pinfunc.h | 1 +
arch/arm/boot/dts/imx6q-pinfunc.h | 1 +
2 files changed, 2 insertions(+)
diff --git a/arch/arm/boot/dts/imx6dl-pinfunc.h b/arch/arm/boot/dts/imx6dl-pinfunc.h
index 0ead323..37e430a 100644
--- a/arch/arm/boot/dts/imx6dl-pinfunc.h
+++ b/arch/arm/boot/dts/imx6dl-pinfunc.h
@@ -668,6 +668,7 @@
#define MX6QDL_PAD_ENET_RX_ER__SPDIF_IN 0x1f4 0x5c4 0x8f0 0x3 0x1
#define MX6QDL_PAD_ENET_RX_ER__ENET_1588_EVENT2_OUT 0x1f4 0x5c4 0x000 0x4 0x0
#define MX6QDL_PAD_ENET_RX_ER__GPIO1_IO24 0x1f4 0x5c4 0x000 0x5 0x0
+#define MX6QDL_PAD_ENET_RXD0__OSC32K_32K_OUT 0x1f8 0x5c8 0x000 0x0 0x0
#define MX6QDL_PAD_ENET_RXD0__ENET_RX_DATA0 0x1f8 0x5c8 0x818 0x1 0x0
#define MX6QDL_PAD_ENET_RXD0__ESAI_TX_HF_CLK 0x1f8 0x5c8 0x838 0x2 0x0
#define MX6QDL_PAD_ENET_RXD0__SPDIF_OUT 0x1f8 0x5c8 0x000 0x3 0x0
diff --git a/arch/arm/boot/dts/imx6q-pinfunc.h b/arch/arm/boot/dts/imx6q-pinfunc.h
index 9fc6120..cfb11d3 100644
--- a/arch/arm/boot/dts/imx6q-pinfunc.h
+++ b/arch/arm/boot/dts/imx6q-pinfunc.h
@@ -551,6 +551,7 @@
#define MX6QDL_PAD_ENET_RXD1__ESAI_TX_FS 0x1e0 0x4f4 0x860 0x2 0x0
#define MX6QDL_PAD_ENET_RXD1__ENET_1588_EVENT3_OUT 0x1e0 0x4f4 0x000 0x4 0x0
#define MX6QDL_PAD_ENET_RXD1__GPIO1_IO26 0x1e0 0x4f4 0x000 0x5 0x0
+#define MX6QDL_PAD_ENET_RXD0__OSC32K_32K_OUT 0x1e4 0x4f8 0x000 0x0 0x0
#define MX6QDL_PAD_ENET_RXD0__ENET_RX_DATA0 0x1e4 0x4f8 0x848 0x1 0x1
#define MX6QDL_PAD_ENET_RXD0__ESAI_TX_HF_CLK 0x1e4 0x4f8 0x868 0x2 0x0
#define MX6QDL_PAD_ENET_RXD0__SPDIF_OUT 0x1e4 0x4f8 0x000 0x3 0x0
--
2.7.4
next prev parent reply other threads:[~2017-11-29 10:21 UTC|newest]
Thread overview: 17+ messages / expand[flat|nested] mbox.gz Atom feed top
2017-11-29 10:20 [PATCH v4 0/6] ARM: Add Variscite DART-MX6 SoM and Carrier-board support Neil Armstrong
2017-11-29 10:20 ` Neil Armstrong [this message]
2017-11-29 10:20 ` [PATCH v4 2/6] dt-bindings: Add vendor prefix for Solomon Goldentek Display Corporation Neil Armstrong
2017-11-29 10:20 ` [PATCH v4 3/6] dt-bindings: display: Add bindings for SGD GKTW70SDAE4SE Panel Neil Armstrong
2017-11-29 10:20 ` [PATCH v4 4/6] ARM: dts: imx6qdl: Add Variscite DART-MX6 SoM support Neil Armstrong
2017-11-30 0:39 ` Shawn Guo
2017-12-01 8:54 ` Neil Armstrong
2017-12-01 9:02 ` Philippe Ombredanne
2017-12-01 9:19 ` Neil Armstrong
2017-12-01 9:40 ` Philippe Ombredanne
2017-12-01 13:40 ` Neil Armstrong
2017-11-29 10:20 ` [PATCH v4 5/6] ARM: dts: imx6q: Add Variscite DART-MX6 Carrier-board support Neil Armstrong
2017-11-30 0:43 ` Shawn Guo
2017-12-01 8:56 ` Neil Armstrong
2017-11-29 10:20 ` [PATCH v4 6/6] ARM: configs: Add missing config for DART-MX6 SoM Neil Armstrong
2017-11-30 0:46 ` Shawn Guo
2017-12-01 8:57 ` Neil Armstrong
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1511950857-19292-2-git-send-email-narmstrong@baylibre.com \
--to=narmstrong@baylibre.com \
--cc=fabio.estevam@nxp.com \
--cc=kernel@pengutronix.de \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=shawnguo@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®