[PATCH 19/19] scsi: hisi_sas: add v3 hw suspend and resume

[John Garry <john.garry@huawei.com>]

From: Xiang Chen <chenxiang66@hisilicon.com>

For v3 hw SAS, it supports configuring power state
from D0 to D3 for entering Low Power status and
power state from D3 to D0 for quit Low Power status.

When power state from D0 to D3, HW will send FLR to
clear the registers of ECAM and BAR space, and when
power state from D3 to D0, it will clear the
registers of ECAM space only.

So when suspend, need to do like controller reset
(including disable interrupts/DQ/PHY/BUS), and
also release slots after FLR. When resume,
re-config the registers of BAR space.

Signed-off-by: Xiang Chen <chenxiang66@hisilicon.com>
Signed-off-by: John Garry <john.garry@huawei.com>
---
 drivers/scsi/hisi_sas/hisi_sas.h       |  1 +
 drivers/scsi/hisi_sas/hisi_sas_main.c  |  3 +-
 drivers/scsi/hisi_sas/hisi_sas_v3_hw.c | 94 ++++++++++++++++++++++++++++++++++
 3 files changed, 97 insertions(+), 1 deletion(-)

diff --git a/drivers/scsi/hisi_sas/hisi_sas.h b/drivers/scsi/hisi_sas/hisi_sas.h
index 4343c4c..cc05029 100644
--- a/drivers/scsi/hisi_sas/hisi_sas.h
+++ b/drivers/scsi/hisi_sas/hisi_sas.h
@@ -461,4 +461,5 @@ extern void hisi_sas_slot_task_free(struct hisi_hba *hisi_hba,
 extern void hisi_sas_kill_tasklets(struct hisi_hba *hisi_hba);
 extern bool hisi_sas_notify_phy_event(struct hisi_sas_phy *phy,
 				enum hisi_sas_phy_event event);
+extern void hisi_sas_release_tasks(struct hisi_hba *hisi_hba);
 #endif
diff --git a/drivers/scsi/hisi_sas/hisi_sas_main.c b/drivers/scsi/hisi_sas/hisi_sas_main.c
index ad12237..04e1172b 100644
--- a/drivers/scsi/hisi_sas/hisi_sas_main.c
+++ b/drivers/scsi/hisi_sas/hisi_sas_main.c
@@ -737,7 +737,7 @@ static void hisi_sas_release_task(struct hisi_hba *hisi_hba,
 		hisi_sas_do_release_task(hisi_hba, slot->task, slot);
 }
 
-static void hisi_sas_release_tasks(struct hisi_hba *hisi_hba)
+void hisi_sas_release_tasks(struct hisi_hba *hisi_hba)
 {
 	struct hisi_sas_device *sas_dev;
 	struct domain_device *device;
@@ -754,6 +754,7 @@ static void hisi_sas_release_tasks(struct hisi_hba *hisi_hba)
 		hisi_sas_release_task(hisi_hba, device);
 	}
 }
+EXPORT_SYMBOL_GPL(hisi_sas_release_tasks);
 
 static void hisi_sas_dereg_device(struct hisi_hba *hisi_hba,
 				struct domain_device *device)
diff --git a/drivers/scsi/hisi_sas/hisi_sas_v3_hw.c b/drivers/scsi/hisi_sas/hisi_sas_v3_hw.c
index 9e32105..6a408d2 100644
--- a/drivers/scsi/hisi_sas/hisi_sas_v3_hw.c
+++ b/drivers/scsi/hisi_sas/hisi_sas_v3_hw.c
@@ -2303,6 +2303,98 @@ enum {
 	hip08,
 };
 
+static int hisi_sas_v3_suspend(struct pci_dev *pdev, pm_message_t state)
+{
+	struct sas_ha_struct *sha = pci_get_drvdata(pdev);
+	struct hisi_hba *hisi_hba = sha->lldd_ha;
+	struct device *dev = hisi_hba->dev;
+	struct Scsi_Host *shost = hisi_hba->shost;
+	u32 device_state, status;
+	int rc;
+	u32 reg_val;
+	unsigned long flags;
+
+	if (!pdev->pm_cap) {
+		dev_err(dev, "PCI PM not supported\n");
+		return -ENODEV;
+	}
+
+	set_bit(HISI_SAS_RESET_BIT, &hisi_hba->flags);
+	scsi_block_requests(shost);
+	set_bit(HISI_SAS_REJECT_CMD_BIT, &hisi_hba->flags);
+	flush_workqueue(hisi_hba->wq);
+	/* disable DQ/PHY/bus */
+	interrupt_disable_v3_hw(hisi_hba);
+	hisi_sas_write32(hisi_hba, DLVRY_QUEUE_ENABLE, 0x0);
+	hisi_sas_kill_tasklets(hisi_hba);
+
+	hisi_sas_stop_phys(hisi_hba);
+
+	reg_val = hisi_sas_read32(hisi_hba, AXI_MASTER_CFG_BASE +
+		AM_CTRL_GLOBAL);
+	reg_val |= 0x1;
+	hisi_sas_write32(hisi_hba, AXI_MASTER_CFG_BASE +
+		AM_CTRL_GLOBAL, reg_val);
+
+	/* wait until bus idle */
+	rc = readl_poll_timeout(hisi_hba->regs + AXI_MASTER_CFG_BASE +
+		AM_CURR_TRANS_RETURN, status, status == 0x3, 10, 100);
+	if (rc) {
+		dev_err(dev, "axi bus is not idle, rc = %d\n", rc);
+		clear_bit(HISI_SAS_REJECT_CMD_BIT, &hisi_hba->flags);
+		clear_bit(HISI_SAS_RESET_BIT, &hisi_hba->flags);
+		scsi_unblock_requests(shost);
+		return rc;
+	}
+
+	hisi_sas_init_mem(hisi_hba);
+
+	device_state = pci_choose_state(pdev, state);
+	dev_warn(dev, "entering operating state [D%d]\n",
+			device_state);
+	pci_save_state(pdev);
+	pci_disable_device(pdev);
+	pci_set_power_state(pdev, device_state);
+
+	spin_lock_irqsave(&hisi_hba->lock, flags);
+	hisi_sas_release_tasks(hisi_hba);
+	spin_unlock_irqrestore(&hisi_hba->lock, flags);
+
+	sas_suspend_ha(sha);
+	return 0;
+}
+
+static int hisi_sas_v3_resume(struct pci_dev *pdev)
+{
+	struct sas_ha_struct *sha = pci_get_drvdata(pdev);
+	struct hisi_hba *hisi_hba = sha->lldd_ha;
+	struct Scsi_Host *shost = hisi_hba->shost;
+	struct device *dev = hisi_hba->dev;
+	unsigned int rc;
+	u32 device_state = pdev->current_state;
+
+	dev_warn(dev, "resuming from operating state [D%d]\n",
+			device_state);
+	pci_set_power_state(pdev, PCI_D0);
+	pci_enable_wake(pdev, PCI_D0, 0);
+	pci_restore_state(pdev);
+	rc = pci_enable_device(pdev);
+	if (rc)
+		dev_err(dev, "enable device failed during resume (%d)\n", rc);
+
+	pci_set_master(pdev);
+	scsi_unblock_requests(shost);
+	clear_bit(HISI_SAS_REJECT_CMD_BIT, &hisi_hba->flags);
+
+	sas_prep_resume_ha(sha);
+	init_reg_v3_hw(hisi_hba);
+	hisi_hba->hw->phys_init(hisi_hba);
+	sas_resume_ha(sha);
+	clear_bit(HISI_SAS_RESET_BIT, &hisi_hba->flags);
+
+	return 0;
+}
+
 static const struct pci_device_id sas_v3_pci_table[] = {
 	{ PCI_VDEVICE(HUAWEI, 0xa230), hip08 },
 	{}
@@ -2319,6 +2411,8 @@ enum {
 	.id_table	= sas_v3_pci_table,
 	.probe		= hisi_sas_v3_probe,
 	.remove		= hisi_sas_v3_remove,
+	.suspend	= hisi_sas_v3_suspend,
+	.resume		= hisi_sas_v3_resume,
 	.err_handler	= &hisi_sas_err_handler,
 };
 
-- 
1.9.1