From: John Garry <john.garry@huawei.com>
To: <jejb@linux.vnet.ibm.com>, <martin.petersen@oracle.com>
Cc: <linuxarm@huawei.com>, <linux-scsi@vger.kernel.org>,
<linux-kernel@vger.kernel.org>,
Xiaofei Tan <tanxiaofei@huawei.com>,
"John Garry" <john.garry@huawei.com>
Subject: [PATCH 05/19] scsi: hisi_sas: some optimizations of host controller reset
Date: Sat, 9 Dec 2017 01:16:36 +0800 [thread overview]
Message-ID: <1512753410-50924-6-git-send-email-john.garry@huawei.com> (raw)
In-Reply-To: <1512753410-50924-1-git-send-email-john.garry@huawei.com>
From: Xiaofei Tan <tanxiaofei@huawei.com>
This patch do following optimizations to host controller reset:
1. Unblock scsi requests before rescanning topology, as SCSI
command need be used if new device is found during rescanning
topology.
2. Remove drain_workqueue(hisi_hba->wq) and
drain_workqueue(shost->work_q), as there is no need to ensure
that all PHYs event are done before exiting host reset.
3. Improve message print level of host reset. Host reset is an
important and very few occurrence event. We should know its progress
even when not debugging.
Signed-off-by: Xiaofei Tan <tanxiaofei@huawei.com>
Signed-off-by: John Garry <john.garry@huawei.com>
---
drivers/scsi/hisi_sas/hisi_sas_main.c | 11 ++++-------
1 file changed, 4 insertions(+), 7 deletions(-)
diff --git a/drivers/scsi/hisi_sas/hisi_sas_main.c b/drivers/scsi/hisi_sas/hisi_sas_main.c
index 326ecb2..64d51a8 100644
--- a/drivers/scsi/hisi_sas/hisi_sas_main.c
+++ b/drivers/scsi/hisi_sas/hisi_sas_main.c
@@ -1061,8 +1061,6 @@ static void hisi_sas_rescan_topology(struct hisi_hba *hisi_hba, u32 old_state,
hisi_sas_phy_down(hisi_hba, phy_no, 0);
}
-
- drain_workqueue(hisi_hba->shost->work_q);
}
static int hisi_sas_controller_reset(struct hisi_hba *hisi_hba)
@@ -1079,7 +1077,7 @@ static int hisi_sas_controller_reset(struct hisi_hba *hisi_hba)
if (test_and_set_bit(HISI_SAS_RESET_BIT, &hisi_hba->flags))
return -1;
- dev_dbg(dev, "controller resetting...\n");
+ dev_info(dev, "controller resetting...\n");
old_state = hisi_hba->hw->get_phys_state(hisi_hba);
scsi_block_requests(shost);
@@ -1088,6 +1086,7 @@ static int hisi_sas_controller_reset(struct hisi_hba *hisi_hba)
if (rc) {
dev_warn(dev, "controller reset failed (%d)\n", rc);
clear_bit(HISI_SAS_REJECT_CMD_BIT, &hisi_hba->flags);
+ scsi_unblock_requests(shost);
goto out;
}
spin_lock_irqsave(&hisi_hba->lock, flags);
@@ -1100,15 +1099,13 @@ static int hisi_sas_controller_reset(struct hisi_hba *hisi_hba)
hisi_hba->hw->phys_init(hisi_hba);
msleep(1000);
hisi_sas_refresh_port_id(hisi_hba);
- drain_workqueue(hisi_hba->wq);
- drain_workqueue(shost->work_q);
+ scsi_unblock_requests(shost);
state = hisi_hba->hw->get_phys_state(hisi_hba);
hisi_sas_rescan_topology(hisi_hba, old_state, state);
- dev_dbg(dev, "controller reset complete\n");
+ dev_info(dev, "controller reset complete\n");
out:
- scsi_unblock_requests(shost);
clear_bit(HISI_SAS_RESET_BIT, &hisi_hba->flags);
return rc;
--
1.9.1
next prev parent reply other threads:[~2017-12-08 16:31 UTC|newest]
Thread overview: 21+ messages / expand[flat|nested] mbox.gz Atom feed top
2017-12-08 17:16 [PATCH 00/19] hisi_sas: PM, RAS, and other misc changes John Garry
2017-12-08 17:16 ` [PATCH 01/19] scsi: hisi_sas: initialize dq spinlock before use John Garry
2017-12-08 17:16 ` [PATCH 02/19] scsi: hisi_sas: fix dma_unmap_sg() parameter John Garry
2017-12-08 17:16 ` [PATCH 03/19] scsi: hisi_sas: relocate clearing ITCT and freeing device John Garry
2017-12-08 17:16 ` [PATCH 04/19] scsi: hisi_sas: optimise port id refresh function John Garry
2017-12-08 17:16 ` John Garry [this message]
2017-12-08 17:16 ` [PATCH 06/19] scsi: hisi_sas: modify hisi_sas_dev_gone() for reset John Garry
2017-12-08 17:16 ` [PATCH 07/19] scsi: hisi_sas: add an mechanism to do reset work synchronously John Garry
2017-12-08 17:16 ` [PATCH 08/19] scsi: hisi_sas: change ncq process for v3 hw John Garry
2017-12-08 17:16 ` [PATCH 09/19] scsi: hisi_sas: add RAS feature " John Garry
2017-12-08 17:16 ` [PATCH 10/19] scsi: hisi_sas: add some print to enhance debugging John Garry
2017-12-08 17:16 ` [PATCH 11/19] scsi: hisi_sas: improve int_chnl_int_v2_hw() consistency with v3 hw John Garry
2017-12-08 17:16 ` [PATCH 12/19] scsi: hisi_sas: add v2 hw port AXI error handling support John Garry
2017-12-08 17:16 ` [PATCH 13/19] scsi: hisi_sas: use an general way to delay PHY work John Garry
2017-12-08 17:16 ` [PATCH 14/19] scsi: hisi_sas: do link reset for some CHL_INT2 ints John Garry
2017-12-08 17:16 ` [PATCH 15/19] scsi: hisi_sas: judge result of internal abort John Garry
2017-12-08 17:16 ` [PATCH 16/19] scsi: hisi_sas: add internal abort dev in some places John Garry
2017-12-08 17:16 ` [PATCH 17/19] scsi: hisi_sas: fix SAS_QUEUE_FULL problem while running IO John Garry
2017-12-08 17:16 ` [PATCH 18/19] scsi: hisi_sas: re-add the lldd_port_deformed() John Garry
2017-12-08 17:16 ` [PATCH 19/19] scsi: hisi_sas: add v3 hw suspend and resume John Garry
2017-12-15 2:34 ` [PATCH 00/19] hisi_sas: PM, RAS, and other misc changes Martin K. Petersen
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1512753410-50924-6-git-send-email-john.garry@huawei.com \
--to=john.garry@huawei.com \
--cc=jejb@linux.vnet.ibm.com \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-scsi@vger.kernel.org \
--cc=linuxarm@huawei.com \
--cc=martin.petersen@oracle.com \
--cc=tanxiaofei@huawei.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®