From: Keerthy <j-keerthy@ti.com>
To: <daniel.lezcano@linaro.org>, <thierry.reding@gmail.com>,
<tony@atomide.com>, <aaro.koskinen@iki.fi>
Cc: <j-keerthy@ti.com>, <Claudiu.Beznea@microchip.com>,
<narmstrong@baylibre.com>, <linux-pwm@vger.kernel.org>,
<ladis@linux-mips.org>, <linux-kernel@vger.kernel.org>,
<linux-arm-kernel@lists.infradead.org>,
<sebastian.reichel@collabora.co.uk>, <linux-omap@vger.kernel.org>,
<robh+dt@kernel.org>, <t-kristo@ti.com>,
<grygorii.strashko@ti.com>
Subject: [PATCH v7 9/9] arm: omap: pdata-quirks: Remove unused timer pdata
Date: Tue, 9 Jan 2018 11:53:07 +0530 [thread overview]
Message-ID: <1515478987-5786-10-git-send-email-j-keerthy@ti.com> (raw)
In-Reply-To: <1515478987-5786-1-git-send-email-j-keerthy@ti.com>
Remove unused timer pdata.
Signed-off-by: Keerthy <j-keerthy@ti.com>
Reviewed-by: Sebastian Reichel <sebastian.reichel@collabora.co.uk>
Tested-by: Ladislav Michl <ladis@linux-mips.org>
---
arch/arm/mach-omap2/pdata-quirks.c | 32 --------------------------------
1 file changed, 32 deletions(-)
diff --git a/arch/arm/mach-omap2/pdata-quirks.c b/arch/arm/mach-omap2/pdata-quirks.c
index ad9df86..e7d7fc7 100644
--- a/arch/arm/mach-omap2/pdata-quirks.c
+++ b/arch/arm/mach-omap2/pdata-quirks.c
@@ -24,10 +24,8 @@
#include <linux/platform_data/hsmmc-omap.h>
#include <linux/platform_data/iommu-omap.h>
#include <linux/platform_data/wkup_m3.h>
-#include <linux/platform_data/pwm_omap_dmtimer.h>
#include <linux/platform_data/media/ir-rx51.h>
#include <linux/platform_data/asoc-ti-mcbsp.h>
-#include <clocksource/dmtimer.h>
#include "common.h"
#include "common-board-devices.h"
@@ -477,33 +475,6 @@ void omap_auxdata_legacy_init(struct device *dev)
dev->platform_data = &twl_gpio_auxdata;
}
-/* Dual mode timer PWM callbacks platdata */
-#if IS_ENABLED(CONFIG_OMAP_DM_TIMER)
-static struct pwm_omap_dmtimer_pdata pwm_dmtimer_pdata = {
- .request_by_node = omap_dm_timer_request_by_node,
- .request_specific = omap_dm_timer_request_specific,
- .request = omap_dm_timer_request,
- .set_source = omap_dm_timer_set_source,
- .get_irq = omap_dm_timer_get_irq,
- .set_int_enable = omap_dm_timer_set_int_enable,
- .set_int_disable = omap_dm_timer_set_int_disable,
- .free = omap_dm_timer_free,
- .enable = omap_dm_timer_enable,
- .disable = omap_dm_timer_disable,
- .get_fclk = omap_dm_timer_get_fclk,
- .start = omap_dm_timer_start,
- .stop = omap_dm_timer_stop,
- .set_load = omap_dm_timer_set_load,
- .set_match = omap_dm_timer_set_match,
- .set_pwm = omap_dm_timer_set_pwm,
- .set_prescaler = omap_dm_timer_set_prescaler,
- .read_counter = omap_dm_timer_read_counter,
- .write_counter = omap_dm_timer_write_counter,
- .read_status = omap_dm_timer_read_status,
- .write_status = omap_dm_timer_write_status,
-};
-#endif
-
static struct ir_rx51_platform_data __maybe_unused rx51_ir_data = {
.set_max_mpu_wakeup_lat = omap_pm_set_max_mpu_wakeup_lat,
};
@@ -572,9 +543,6 @@ static void __init omap3_mcbsp_init(void) {}
OF_DEV_AUXDATA("ti,am4372-wkup-m3", 0x44d00000, "44d00000.wkup_m3",
&wkup_m3_data),
#endif
-#if IS_ENABLED(CONFIG_OMAP_DM_TIMER)
- OF_DEV_AUXDATA("ti,omap-dmtimer-pwm", 0, NULL, &pwm_dmtimer_pdata),
-#endif
#if defined(CONFIG_ARCH_OMAP4) || defined(CONFIG_SOC_OMAP5)
OF_DEV_AUXDATA("ti,omap4-iommu", 0x4a066000, "4a066000.mmu",
&omap4_iommu_pdata),
--
1.9.1
prev parent reply other threads:[~2018-01-09 6:25 UTC|newest]
Thread overview: 21+ messages / expand[flat|nested] mbox.gz Atom feed top
2018-01-09 6:22 [PATCH v7 0/9] omap: dmtimer: Move driver out of plat-omap Keerthy
2018-01-09 6:22 ` [PATCH v7 1/9] clocksource: dmtimer: Remove all the exports Keerthy
2018-01-09 6:23 ` [PATCH v7 2/9] arm: omap: timer: Wrap the inline functions under OMAP2PLUS define Keerthy
2018-01-09 9:19 ` Sebastian Reichel
2018-01-09 6:23 ` [PATCH v7 3/9] arm: omap: Move dmtimer.h out of plat-omap Keerthy
2018-02-13 2:06 ` Suman Anna
2018-02-13 15:09 ` Tony Lindgren
2018-02-14 4:11 ` Keerthy
2018-02-14 4:50 ` Keerthy
2018-02-14 18:59 ` Tony Lindgren
2018-01-09 6:23 ` [PATCH v7 4/9] arm: OMAP: Move dmtimer driver out of plat-omap to drivers under clocksource Keerthy
2018-02-13 2:24 ` Suman Anna
2018-02-14 5:09 ` Keerthy
2018-01-09 6:23 ` [PATCH v7 5/9] dmtimer: Add timer ops to the platform data structure Keerthy
2018-02-13 2:46 ` Suman Anna
2018-02-14 5:21 ` Keerthy
2018-01-09 6:23 ` [PATCH v7 6/9] clocksource: dmtimer: Populate the timer ops to the pdata Keerthy
2018-01-09 6:23 ` [PATCH v7 7/9] clocksource: timer-dm: Hook device platform data if not already assigned Keerthy
2018-01-09 9:19 ` Sebastian Reichel
2018-01-09 6:23 ` [PATCH v7 8/9] pwm: pwm-omap-dmtimer: Adapt driver to utilize dmtimer pdata ops Keerthy
2018-01-09 6:23 ` Keerthy [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1515478987-5786-10-git-send-email-j-keerthy@ti.com \
--to=j-keerthy@ti.com \
--cc=Claudiu.Beznea@microchip.com \
--cc=aaro.koskinen@iki.fi \
--cc=daniel.lezcano@linaro.org \
--cc=grygorii.strashko@ti.com \
--cc=ladis@linux-mips.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-omap@vger.kernel.org \
--cc=linux-pwm@vger.kernel.org \
--cc=narmstrong@baylibre.com \
--cc=robh+dt@kernel.org \
--cc=sebastian.reichel@collabora.co.uk \
--cc=t-kristo@ti.com \
--cc=thierry.reding@gmail.com \
--cc=tony@atomide.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®