* [PATCH v2] media: stm32-dcmi: fix lock scheme
@ 2018-02-22 9:49 Hugues Fruchet
2018-02-26 13:56 ` Hans Verkuil
0 siblings, 1 reply; 3+ messages in thread
From: Hugues Fruchet @ 2018-02-22 9:49 UTC (permalink / raw)
To: Maxime Coquelin, Alexandre Torgue, Mauro Carvalho Chehab, Hans Verkuil
Cc: linux-media, linux-arm-kernel, linux-kernel, Benjamin Gaignard,
Yannick Fertre, Hugues Fruchet
Fix lock scheme leading to spurious freeze.
Signed-off-by: Hugues Fruchet <hugues.fruchet@st.com>
---
version 2:
- dcmi_buf_queue() refactor to avoid to have "else" after "return"
(warning detected by checkpatch.pl --strict -f stm32-dcmi.c)
drivers/media/platform/stm32/stm32-dcmi.c | 57 +++++++++++++------------------
1 file changed, 24 insertions(+), 33 deletions(-)
diff --git a/drivers/media/platform/stm32/stm32-dcmi.c b/drivers/media/platform/stm32/stm32-dcmi.c
index 2fd8bed..5de18ad 100644
--- a/drivers/media/platform/stm32/stm32-dcmi.c
+++ b/drivers/media/platform/stm32/stm32-dcmi.c
@@ -197,7 +197,7 @@ static void dcmi_dma_callback(void *param)
struct dma_tx_state state;
enum dma_status status;
- spin_lock(&dcmi->irqlock);
+ spin_lock_irq(&dcmi->irqlock);
/* Check DMA status */
status = dmaengine_tx_status(chan, dcmi->dma_cookie, &state);
@@ -239,7 +239,7 @@ static void dcmi_dma_callback(void *param)
dcmi->errors_count++;
dcmi->active = NULL;
- spin_unlock(&dcmi->irqlock);
+ spin_unlock_irq(&dcmi->irqlock);
return;
}
@@ -248,13 +248,11 @@ static void dcmi_dma_callback(void *param)
list_del_init(&dcmi->active->list);
- if (dcmi_start_capture(dcmi)) {
+ spin_unlock_irq(&dcmi->irqlock);
+ if (dcmi_start_capture(dcmi))
dev_err(dcmi->dev, "%s: Cannot restart capture on DMA complete\n",
__func__);
-
- spin_unlock(&dcmi->irqlock);
- return;
- }
+ return;
}
break;
@@ -263,7 +261,7 @@ static void dcmi_dma_callback(void *param)
break;
}
- spin_unlock(&dcmi->irqlock);
+ spin_unlock_irq(&dcmi->irqlock);
}
static int dcmi_start_dma(struct stm32_dcmi *dcmi,
@@ -360,7 +358,7 @@ static irqreturn_t dcmi_irq_thread(int irq, void *arg)
{
struct stm32_dcmi *dcmi = arg;
- spin_lock(&dcmi->irqlock);
+ spin_lock_irq(&dcmi->irqlock);
/* Stop capture is required */
if (dcmi->state == STOPPING) {
@@ -370,7 +368,7 @@ static irqreturn_t dcmi_irq_thread(int irq, void *arg)
complete(&dcmi->complete);
- spin_unlock(&dcmi->irqlock);
+ spin_unlock_irq(&dcmi->irqlock);
return IRQ_HANDLED;
}
@@ -383,35 +381,34 @@ static irqreturn_t dcmi_irq_thread(int irq, void *arg)
__func__);
dcmi->errors_count++;
- dmaengine_terminate_all(dcmi->dma_chan);
-
dev_dbg(dcmi->dev, "Restarting capture after DCMI error\n");
- if (dcmi_start_capture(dcmi)) {
+ spin_unlock_irq(&dcmi->irqlock);
+ dmaengine_terminate_all(dcmi->dma_chan);
+
+ if (dcmi_start_capture(dcmi))
dev_err(dcmi->dev, "%s: Cannot restart capture on overflow or error\n",
__func__);
-
- spin_unlock(&dcmi->irqlock);
- return IRQ_HANDLED;
- }
+ return IRQ_HANDLED;
}
- spin_unlock(&dcmi->irqlock);
+ spin_unlock_irq(&dcmi->irqlock);
return IRQ_HANDLED;
}
static irqreturn_t dcmi_irq_callback(int irq, void *arg)
{
struct stm32_dcmi *dcmi = arg;
+ unsigned long flags;
- spin_lock(&dcmi->irqlock);
+ spin_lock_irqsave(&dcmi->irqlock, flags);
dcmi->misr = reg_read(dcmi->regs, DCMI_MIS);
/* Clear interrupt */
reg_set(dcmi->regs, DCMI_ICR, IT_FRAME | IT_OVR | IT_ERR);
- spin_unlock(&dcmi->irqlock);
+ spin_unlock_irqrestore(&dcmi->irqlock, flags);
return IRQ_WAKE_THREAD;
}
@@ -490,9 +487,8 @@ static void dcmi_buf_queue(struct vb2_buffer *vb)
struct stm32_dcmi *dcmi = vb2_get_drv_priv(vb->vb2_queue);
struct vb2_v4l2_buffer *vbuf = to_vb2_v4l2_buffer(vb);
struct dcmi_buf *buf = container_of(vbuf, struct dcmi_buf, vb);
- unsigned long flags = 0;
- spin_lock_irqsave(&dcmi->irqlock, flags);
+ spin_lock_irq(&dcmi->irqlock);
if ((dcmi->state == RUNNING) && (!dcmi->active)) {
dcmi->active = buf;
@@ -500,19 +496,15 @@ static void dcmi_buf_queue(struct vb2_buffer *vb)
dev_dbg(dcmi->dev, "Starting capture on buffer[%d] queued\n",
buf->vb.vb2_buf.index);
- if (dcmi_start_capture(dcmi)) {
+ spin_unlock_irq(&dcmi->irqlock);
+ if (dcmi_start_capture(dcmi))
dev_err(dcmi->dev, "%s: Cannot restart capture on overflow or error\n",
__func__);
-
- spin_unlock_irqrestore(&dcmi->irqlock, flags);
- return;
- }
} else {
/* Enqueue to video buffers list */
list_add_tail(&buf->list, &dcmi->buffers);
+ spin_unlock_irq(&dcmi->irqlock);
}
-
- spin_unlock_irqrestore(&dcmi->irqlock, flags);
}
static int dcmi_start_streaming(struct vb2_queue *vq, unsigned int count)
@@ -598,20 +590,17 @@ static int dcmi_start_streaming(struct vb2_queue *vq, unsigned int count)
dev_dbg(dcmi->dev, "Start streaming, starting capture\n");
+ spin_unlock_irq(&dcmi->irqlock);
ret = dcmi_start_capture(dcmi);
if (ret) {
dev_err(dcmi->dev, "%s: Start streaming failed, cannot start capture\n",
__func__);
-
- spin_unlock_irq(&dcmi->irqlock);
goto err_subdev_streamoff;
}
/* Enable interruptions */
reg_set(dcmi->regs, DCMI_IER, IT_FRAME | IT_OVR | IT_ERR);
- spin_unlock_irq(&dcmi->irqlock);
-
return 0;
err_subdev_streamoff:
@@ -654,7 +643,9 @@ static void dcmi_stop_streaming(struct vb2_queue *vq)
dev_err(dcmi->dev, "%s: Failed to stop streaming, subdev streamoff error (%d)\n",
__func__, ret);
+ spin_lock_irq(&dcmi->irqlock);
dcmi->state = STOPPING;
+ spin_unlock_irq(&dcmi->irqlock);
timeout = wait_for_completion_interruptible_timeout(&dcmi->complete,
time_ms);
--
1.9.1
^ permalink raw reply [flat|nested] 3+ messages in thread* Re: [PATCH v2] media: stm32-dcmi: fix lock scheme
2018-02-22 9:49 [PATCH v2] media: stm32-dcmi: fix lock scheme Hugues Fruchet
@ 2018-02-26 13:56 ` Hans Verkuil
2018-02-28 17:04 ` Hugues FRUCHET
0 siblings, 1 reply; 3+ messages in thread
From: Hans Verkuil @ 2018-02-26 13:56 UTC (permalink / raw)
To: Hugues Fruchet, Maxime Coquelin, Alexandre Torgue, Mauro Carvalho Chehab
Cc: linux-media, linux-arm-kernel, linux-kernel, Benjamin Gaignard,
Yannick Fertre
On 02/22/2018 10:49 AM, Hugues Fruchet wrote:
> Fix lock scheme leading to spurious freeze.
Can you elaborate a bit more? It's hard to review since you don't
describe what was wrong and why this fixes the problem.
Regards,
Hans
>
> Signed-off-by: Hugues Fruchet <hugues.fruchet@st.com>
> ---
> version 2:
> - dcmi_buf_queue() refactor to avoid to have "else" after "return"
> (warning detected by checkpatch.pl --strict -f stm32-dcmi.c)
>
> drivers/media/platform/stm32/stm32-dcmi.c | 57 +++++++++++++------------------
> 1 file changed, 24 insertions(+), 33 deletions(-)
>
> diff --git a/drivers/media/platform/stm32/stm32-dcmi.c b/drivers/media/platform/stm32/stm32-dcmi.c
> index 2fd8bed..5de18ad 100644
> --- a/drivers/media/platform/stm32/stm32-dcmi.c
> +++ b/drivers/media/platform/stm32/stm32-dcmi.c
> @@ -197,7 +197,7 @@ static void dcmi_dma_callback(void *param)
> struct dma_tx_state state;
> enum dma_status status;
>
> - spin_lock(&dcmi->irqlock);
> + spin_lock_irq(&dcmi->irqlock);
>
> /* Check DMA status */
> status = dmaengine_tx_status(chan, dcmi->dma_cookie, &state);
> @@ -239,7 +239,7 @@ static void dcmi_dma_callback(void *param)
> dcmi->errors_count++;
> dcmi->active = NULL;
>
> - spin_unlock(&dcmi->irqlock);
> + spin_unlock_irq(&dcmi->irqlock);
> return;
> }
>
> @@ -248,13 +248,11 @@ static void dcmi_dma_callback(void *param)
>
> list_del_init(&dcmi->active->list);
>
> - if (dcmi_start_capture(dcmi)) {
> + spin_unlock_irq(&dcmi->irqlock);
> + if (dcmi_start_capture(dcmi))
> dev_err(dcmi->dev, "%s: Cannot restart capture on DMA complete\n",
> __func__);
> -
> - spin_unlock(&dcmi->irqlock);
> - return;
> - }
> + return;
> }
>
> break;
> @@ -263,7 +261,7 @@ static void dcmi_dma_callback(void *param)
> break;
> }
>
> - spin_unlock(&dcmi->irqlock);
> + spin_unlock_irq(&dcmi->irqlock);
> }
>
> static int dcmi_start_dma(struct stm32_dcmi *dcmi,
> @@ -360,7 +358,7 @@ static irqreturn_t dcmi_irq_thread(int irq, void *arg)
> {
> struct stm32_dcmi *dcmi = arg;
>
> - spin_lock(&dcmi->irqlock);
> + spin_lock_irq(&dcmi->irqlock);
>
> /* Stop capture is required */
> if (dcmi->state == STOPPING) {
> @@ -370,7 +368,7 @@ static irqreturn_t dcmi_irq_thread(int irq, void *arg)
>
> complete(&dcmi->complete);
>
> - spin_unlock(&dcmi->irqlock);
> + spin_unlock_irq(&dcmi->irqlock);
> return IRQ_HANDLED;
> }
>
> @@ -383,35 +381,34 @@ static irqreturn_t dcmi_irq_thread(int irq, void *arg)
> __func__);
>
> dcmi->errors_count++;
> - dmaengine_terminate_all(dcmi->dma_chan);
> -
> dev_dbg(dcmi->dev, "Restarting capture after DCMI error\n");
>
> - if (dcmi_start_capture(dcmi)) {
> + spin_unlock_irq(&dcmi->irqlock);
> + dmaengine_terminate_all(dcmi->dma_chan);
> +
> + if (dcmi_start_capture(dcmi))
> dev_err(dcmi->dev, "%s: Cannot restart capture on overflow or error\n",
> __func__);
> -
> - spin_unlock(&dcmi->irqlock);
> - return IRQ_HANDLED;
> - }
> + return IRQ_HANDLED;
> }
>
> - spin_unlock(&dcmi->irqlock);
> + spin_unlock_irq(&dcmi->irqlock);
> return IRQ_HANDLED;
> }
>
> static irqreturn_t dcmi_irq_callback(int irq, void *arg)
> {
> struct stm32_dcmi *dcmi = arg;
> + unsigned long flags;
>
> - spin_lock(&dcmi->irqlock);
> + spin_lock_irqsave(&dcmi->irqlock, flags);
>
> dcmi->misr = reg_read(dcmi->regs, DCMI_MIS);
>
> /* Clear interrupt */
> reg_set(dcmi->regs, DCMI_ICR, IT_FRAME | IT_OVR | IT_ERR);
>
> - spin_unlock(&dcmi->irqlock);
> + spin_unlock_irqrestore(&dcmi->irqlock, flags);
>
> return IRQ_WAKE_THREAD;
> }
> @@ -490,9 +487,8 @@ static void dcmi_buf_queue(struct vb2_buffer *vb)
> struct stm32_dcmi *dcmi = vb2_get_drv_priv(vb->vb2_queue);
> struct vb2_v4l2_buffer *vbuf = to_vb2_v4l2_buffer(vb);
> struct dcmi_buf *buf = container_of(vbuf, struct dcmi_buf, vb);
> - unsigned long flags = 0;
>
> - spin_lock_irqsave(&dcmi->irqlock, flags);
> + spin_lock_irq(&dcmi->irqlock);
>
> if ((dcmi->state == RUNNING) && (!dcmi->active)) {
> dcmi->active = buf;
> @@ -500,19 +496,15 @@ static void dcmi_buf_queue(struct vb2_buffer *vb)
> dev_dbg(dcmi->dev, "Starting capture on buffer[%d] queued\n",
> buf->vb.vb2_buf.index);
>
> - if (dcmi_start_capture(dcmi)) {
> + spin_unlock_irq(&dcmi->irqlock);
> + if (dcmi_start_capture(dcmi))
> dev_err(dcmi->dev, "%s: Cannot restart capture on overflow or error\n",
> __func__);
> -
> - spin_unlock_irqrestore(&dcmi->irqlock, flags);
> - return;
> - }
> } else {
> /* Enqueue to video buffers list */
> list_add_tail(&buf->list, &dcmi->buffers);
> + spin_unlock_irq(&dcmi->irqlock);
> }
> -
> - spin_unlock_irqrestore(&dcmi->irqlock, flags);
> }
>
> static int dcmi_start_streaming(struct vb2_queue *vq, unsigned int count)
> @@ -598,20 +590,17 @@ static int dcmi_start_streaming(struct vb2_queue *vq, unsigned int count)
>
> dev_dbg(dcmi->dev, "Start streaming, starting capture\n");
>
> + spin_unlock_irq(&dcmi->irqlock);
> ret = dcmi_start_capture(dcmi);
> if (ret) {
> dev_err(dcmi->dev, "%s: Start streaming failed, cannot start capture\n",
> __func__);
> -
> - spin_unlock_irq(&dcmi->irqlock);
> goto err_subdev_streamoff;
> }
>
> /* Enable interruptions */
> reg_set(dcmi->regs, DCMI_IER, IT_FRAME | IT_OVR | IT_ERR);
>
> - spin_unlock_irq(&dcmi->irqlock);
> -
> return 0;
>
> err_subdev_streamoff:
> @@ -654,7 +643,9 @@ static void dcmi_stop_streaming(struct vb2_queue *vq)
> dev_err(dcmi->dev, "%s: Failed to stop streaming, subdev streamoff error (%d)\n",
> __func__, ret);
>
> + spin_lock_irq(&dcmi->irqlock);
> dcmi->state = STOPPING;
> + spin_unlock_irq(&dcmi->irqlock);
>
> timeout = wait_for_completion_interruptible_timeout(&dcmi->complete,
> time_ms);
>
^ permalink raw reply [flat|nested] 3+ messages in thread* Re: [PATCH v2] media: stm32-dcmi: fix lock scheme
2018-02-26 13:56 ` Hans Verkuil
@ 2018-02-28 17:04 ` Hugues FRUCHET
0 siblings, 0 replies; 3+ messages in thread
From: Hugues FRUCHET @ 2018-02-28 17:04 UTC (permalink / raw)
To: Hans Verkuil, Maxime Coquelin, Alexandre TORGUE, Mauro Carvalho Chehab
Cc: linux-media, linux-arm-kernel, linux-kernel, Benjamin Gaignard,
Yannick FERTRE
Hi Hans,
Problem was that lock was held while calling dmaengine APIs, which
causes double lock issue when dma callback was called under context of
dma_async_issue_pending() (see dcmi_start_dma() & below comments).
Rest of changes are around spin_lock() changed to spin_lock_irq() for
safer lock management.
On 02/26/2018 02:56 PM, Hans Verkuil wrote:
> On 02/22/2018 10:49 AM, Hugues Fruchet wrote:
>> Fix lock scheme leading to spurious freeze.
>
> Can you elaborate a bit more? It's hard to review since you don't
> describe what was wrong and why this fixes the problem.
>
> Regards,
>
> Hans
>
>>
>> Signed-off-by: Hugues Fruchet <hugues.fruchet@st.com>
>> ---
>> version 2:
>> - dcmi_buf_queue() refactor to avoid to have "else" after "return"
>> (warning detected by checkpatch.pl --strict -f stm32-dcmi.c)
>>
>> drivers/media/platform/stm32/stm32-dcmi.c | 57 +++++++++++++------------------
>> 1 file changed, 24 insertions(+), 33 deletions(-)
>>
>> diff --git a/drivers/media/platform/stm32/stm32-dcmi.c b/drivers/media/platform/stm32/stm32-dcmi.c
>> index 2fd8bed..5de18ad 100644
>> --- a/drivers/media/platform/stm32/stm32-dcmi.c
>> +++ b/drivers/media/platform/stm32/stm32-dcmi.c
>> @@ -197,7 +197,7 @@ static void dcmi_dma_callback(void *param)
>> struct dma_tx_state state;
>> enum dma_status status;
>>
>> - spin_lock(&dcmi->irqlock);
>> + spin_lock_irq(&dcmi->irqlock);
>>
>> /* Check DMA status */
>> status = dmaengine_tx_status(chan, dcmi->dma_cookie, &state);
>> @@ -239,7 +239,7 @@ static void dcmi_dma_callback(void *param)
>> dcmi->errors_count++;
>> dcmi->active = NULL;
>>
>> - spin_unlock(&dcmi->irqlock);
>> + spin_unlock_irq(&dcmi->irqlock);
>> return;
>> }
>>
>> @@ -248,13 +248,11 @@ static void dcmi_dma_callback(void *param)
>>
>> list_del_init(&dcmi->active->list);
>>
>> - if (dcmi_start_capture(dcmi)) {
>> + spin_unlock_irq(&dcmi->irqlock);
Lock is released here before calling dcmi_start_capture() which calls
dma_async_issue_pending()
>> + if (dcmi_start_capture(dcmi))
>> dev_err(dcmi->dev, "%s: Cannot restart capture on DMA complete\n",
>> __func__);
>> -
>> - spin_unlock(&dcmi->irqlock);
>> - return;
>> - }
>> + return;
>> }
>>
>> break;
>> @@ -263,7 +261,7 @@ static void dcmi_dma_callback(void *param)
>> break;
>> }
>>
>> - spin_unlock(&dcmi->irqlock);
>> + spin_unlock_irq(&dcmi->irqlock);
>> }
>>
>> static int dcmi_start_dma(struct stm32_dcmi *dcmi,
>> @@ -360,7 +358,7 @@ static irqreturn_t dcmi_irq_thread(int irq, void *arg)
>> {
>> struct stm32_dcmi *dcmi = arg;
>>
>> - spin_lock(&dcmi->irqlock);
>> + spin_lock_irq(&dcmi->irqlock);
>>
>> /* Stop capture is required */
>> if (dcmi->state == STOPPING) {
>> @@ -370,7 +368,7 @@ static irqreturn_t dcmi_irq_thread(int irq, void *arg)
>>
>> complete(&dcmi->complete);
>>
>> - spin_unlock(&dcmi->irqlock);
>> + spin_unlock_irq(&dcmi->irqlock);
>> return IRQ_HANDLED;
>> }
>>
>> @@ -383,35 +381,34 @@ static irqreturn_t dcmi_irq_thread(int irq, void *arg)
>> __func__);
>>
>> dcmi->errors_count++;
>> - dmaengine_terminate_all(dcmi->dma_chan);
>> -
>> dev_dbg(dcmi->dev, "Restarting capture after DCMI error\n");
>>
>> - if (dcmi_start_capture(dcmi)) {
>> + spin_unlock_irq(&dcmi->irqlock);
Lock is released here before calling dma APIs (terminate then
async_issue_pending)
>> + dmaengine_terminate_all(dcmi->dma_chan);
>> +
>> + if (dcmi_start_capture(dcmi))
>> dev_err(dcmi->dev, "%s: Cannot restart capture on overflow or error\n",
>> __func__);
>> -
>> - spin_unlock(&dcmi->irqlock);
>> - return IRQ_HANDLED;
>> - }
>> + return IRQ_HANDLED;
>> }
>>
>> - spin_unlock(&dcmi->irqlock);
>> + spin_unlock_irq(&dcmi->irqlock);
>> return IRQ_HANDLED;
>> }
>>
>> static irqreturn_t dcmi_irq_callback(int irq, void *arg)
>> {
>> struct stm32_dcmi *dcmi = arg;
>> + unsigned long flags;
>>
>> - spin_lock(&dcmi->irqlock);
>> + spin_lock_irqsave(&dcmi->irqlock, flags);
>>
>> dcmi->misr = reg_read(dcmi->regs, DCMI_MIS);
>>
>> /* Clear interrupt */
>> reg_set(dcmi->regs, DCMI_ICR, IT_FRAME | IT_OVR | IT_ERR);
>>
>> - spin_unlock(&dcmi->irqlock);
>> + spin_unlock_irqrestore(&dcmi->irqlock, flags);
>>
>> return IRQ_WAKE_THREAD;
>> }
>> @@ -490,9 +487,8 @@ static void dcmi_buf_queue(struct vb2_buffer *vb)
>> struct stm32_dcmi *dcmi = vb2_get_drv_priv(vb->vb2_queue);
>> struct vb2_v4l2_buffer *vbuf = to_vb2_v4l2_buffer(vb);
>> struct dcmi_buf *buf = container_of(vbuf, struct dcmi_buf, vb);
>> - unsigned long flags = 0;
>>
>> - spin_lock_irqsave(&dcmi->irqlock, flags);
>> + spin_lock_irq(&dcmi->irqlock);
>>
>> if ((dcmi->state == RUNNING) && (!dcmi->active)) {
>> dcmi->active = buf;
>> @@ -500,19 +496,15 @@ static void dcmi_buf_queue(struct vb2_buffer *vb)
>> dev_dbg(dcmi->dev, "Starting capture on buffer[%d] queued\n",
>> buf->vb.vb2_buf.index);
>>
>> - if (dcmi_start_capture(dcmi)) {
>> + spin_unlock_irq(&dcmi->irqlock);
Lock is released here before calling dma APIs (terminate then
async_issue_pending)
>> + if (dcmi_start_capture(dcmi))
>> dev_err(dcmi->dev, "%s: Cannot restart capture on overflow or error\n",
>> __func__);
>> -
>> - spin_unlock_irqrestore(&dcmi->irqlock, flags);
>> - return;
>> - }
>> } else {
>> /* Enqueue to video buffers list */
>> list_add_tail(&buf->list, &dcmi->buffers);
>> + spin_unlock_irq(&dcmi->irqlock);
>> }
>> -
>> - spin_unlock_irqrestore(&dcmi->irqlock, flags);
>> }
>>
>> static int dcmi_start_streaming(struct vb2_queue *vq, unsigned int count)
>> @@ -598,20 +590,17 @@ static int dcmi_start_streaming(struct vb2_queue *vq, unsigned int count)
>>
>> dev_dbg(dcmi->dev, "Start streaming, starting capture\n");
>>
>> + spin_unlock_irq(&dcmi->irqlock);
>> ret = dcmi_start_capture(dcmi);
>> if (ret) {
>> dev_err(dcmi->dev, "%s: Start streaming failed, cannot start capture\n",
>> __func__);
>> -
>> - spin_unlock_irq(&dcmi->irqlock);
>> goto err_subdev_streamoff;
>> }
>>
>> /* Enable interruptions */
>> reg_set(dcmi->regs, DCMI_IER, IT_FRAME | IT_OVR | IT_ERR);
>>
>> - spin_unlock_irq(&dcmi->irqlock);
>> -
>> return 0;
>>
>> err_subdev_streamoff:
>> @@ -654,7 +643,9 @@ static void dcmi_stop_streaming(struct vb2_queue *vq)
>> dev_err(dcmi->dev, "%s: Failed to stop streaming, subdev streamoff error (%d)\n",
>> __func__, ret);
>>
>> + spin_lock_irq(&dcmi->irqlock);
>> dcmi->state = STOPPING;
>> + spin_unlock_irq(&dcmi->irqlock);
>>
>> timeout = wait_for_completion_interruptible_timeout(&dcmi->complete,
>> time_ms);
>>
>
Best regards,
Hugues.
^ permalink raw reply [flat|nested] 3+ messages in thread
end of thread, other threads:[~2018-02-28 17:05 UTC | newest]
Thread overview: 3+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2018-02-22 9:49 [PATCH v2] media: stm32-dcmi: fix lock scheme Hugues Fruchet
2018-02-26 13:56 ` Hans Verkuil
2018-02-28 17:04 ` Hugues FRUCHET
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®