mirror of https://lore.kernel.org/lkml/
 help / color / mirror / Atom feed
From: John Garry <john.garry@huawei.com>
To: <jejb@linux.vnet.ibm.com>, <martin.petersen@oracle.com>
Cc: <linux-scsi@vger.kernel.org>, <linuxarm@huawei.com>,
	<linux-kernel@vger.kernel.org>,
	Xiang Chen <chenxiang66@hisilicon.com>,
	Xiaofei Tan <tanxiaofei@huawei.com>,
	John Garry <john.garry@huawei.com>
Subject: [PATCH 05/13] scsi: hisi_sas: Reset disks when discovered
Date: Mon, 21 May 2018 18:09:17 +0800	[thread overview]
Message-ID: <1526897365-228549-6-git-send-email-john.garry@huawei.com> (raw)
In-Reply-To: <1526897365-228549-1-git-send-email-john.garry@huawei.com>

From: Xiang Chen <chenxiang66@hisilicon.com>

When a disk is discovered, it may be in an error state,
or there may be residual commands remaining in the disk.

To ensure any disk is in good state after discovery,
reset via TMF (for SAS disk) or softreset (for a SATA
disk).

Signed-off-by: Xiang Chen <chenxiang66@hisilicon.com>
Signed-off-by: Xiaofei Tan <tanxiaofei@huawei.com>
Signed-off-by: John Garry <john.garry@huawei.com>
---
 drivers/scsi/hisi_sas/hisi_sas_main.c | 50 ++++++++++++++++++++++++++++++++++-
 1 file changed, 49 insertions(+), 1 deletion(-)

diff --git a/drivers/scsi/hisi_sas/hisi_sas_main.c b/drivers/scsi/hisi_sas/hisi_sas_main.c
index 04a3eb4..0596553 100644
--- a/drivers/scsi/hisi_sas/hisi_sas_main.c
+++ b/drivers/scsi/hisi_sas/hisi_sas_main.c
@@ -24,6 +24,9 @@ static int hisi_sas_debug_issue_ssp_tmf(struct domain_device *device,
 static int hisi_sas_softreset_ata_disk(struct domain_device *device);
 static int hisi_sas_control_phy(struct asd_sas_phy *sas_phy, enum phy_func func,
 				void *funcdata);
+static void hisi_sas_release_task(struct hisi_hba *hisi_hba,
+				  struct domain_device *device);
+static void hisi_sas_dev_gone(struct domain_device *device);
 
 u8 hisi_sas_get_ata_protocol(struct host_to_dev_fis *fis, int direction)
 {
@@ -624,12 +627,49 @@ static struct hisi_sas_device *hisi_sas_alloc_dev(struct domain_device *device)
 	return sas_dev;
 }
 
+#define HISI_SAS_SRST_ATA_DISK_CNT 3
+static int hisi_sas_init_device(struct domain_device *device)
+{
+	int rc = TMF_RESP_FUNC_COMPLETE;
+	struct scsi_lun lun;
+	struct hisi_sas_tmf_task tmf_task;
+	int retry = HISI_SAS_SRST_ATA_DISK_CNT;
+	struct hisi_hba *hisi_hba = dev_to_hisi_hba(device);
+
+	switch (device->dev_type) {
+	case SAS_END_DEVICE:
+		int_to_scsilun(0, &lun);
+
+		tmf_task.tmf = TMF_CLEAR_TASK_SET;
+		rc = hisi_sas_debug_issue_ssp_tmf(device, lun.scsi_lun,
+						  &tmf_task);
+		if (rc == TMF_RESP_FUNC_COMPLETE)
+			hisi_sas_release_task(hisi_hba, device);
+		break;
+	case SAS_SATA_DEV:
+	case SAS_SATA_PM:
+	case SAS_SATA_PM_PORT:
+	case SAS_SATA_PENDING:
+		while (retry-- > 0) {
+			rc = hisi_sas_softreset_ata_disk(device);
+			if (!rc)
+				break;
+		}
+		break;
+	default:
+		break;
+	}
+
+	return rc;
+}
+
 static int hisi_sas_dev_found(struct domain_device *device)
 {
 	struct hisi_hba *hisi_hba = dev_to_hisi_hba(device);
 	struct domain_device *parent_dev = device->parent;
 	struct hisi_sas_device *sas_dev;
 	struct device *dev = hisi_hba->dev;
+	int rc;
 
 	if (hisi_hba->hw->alloc_dev)
 		sas_dev = hisi_hba->hw->alloc_dev(device);
@@ -661,14 +701,22 @@ static int hisi_sas_dev_found(struct domain_device *device)
 				 "dev:%016llx at ex:%016llx\n",
 				 SAS_ADDR(device->sas_addr),
 				 SAS_ADDR(parent_dev->sas_addr));
-			return -EINVAL;
+			rc = -EINVAL;
+			goto err_out;
 		}
 	}
 
 	dev_info(dev, "dev[%d:%x] found\n",
 		sas_dev->device_id, sas_dev->dev_type);
 
+	rc = hisi_sas_init_device(device);
+	if (rc)
+		goto err_out;
 	return 0;
+
+err_out:
+	hisi_sas_dev_gone(device);
+	return rc;
 }
 
 static int hisi_sas_slave_configure(struct scsi_device *sdev)
-- 
1.9.1

  parent reply	other threads:[~2018-05-21 10:13 UTC|newest]

Thread overview: 15+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2018-05-21 10:09 [PATCH 00/13] hisi_sas: Misc improvements, bugfixes, etc John Garry
2018-05-21 10:09 ` [PATCH 01/13] scsi: hisi_sas: Introduce hisi_sas_phy_set_linkrate() John Garry
2018-05-21 10:09 ` [PATCH 02/13] scsi: hisi_sas: change slot index allocation mode John Garry
2018-05-21 10:09 ` [PATCH 03/13] scsi: hisi_sas: Change common allocation mode of device id John Garry
2018-05-21 10:09 ` [PATCH 04/13] scsi: hisi_sas: Add LED feature for v3 hw John Garry
2018-05-21 10:09 ` John Garry [this message]
2018-05-21 10:09 ` [PATCH 06/13] scsi: hisi_sas: Create a scsi_host_template per HW module John Garry
2018-05-21 10:09 ` [PATCH 07/13] scsi: hisi_sas: Init disks after controller reset John Garry
2018-05-21 10:09 ` [PATCH 08/13] scsi: hisi_sas: Try wait commands before before " John Garry
2018-05-21 10:09 ` [PATCH 09/13] scsi: hisi_sas: Include TMF elements in struct hisi_sas_slot John Garry
2018-05-21 10:09 ` [PATCH 10/13] scsi: hisi_sas: Add v2 hw force PHY function for internal ATA command John Garry
2018-05-21 10:09 ` [PATCH 11/13] scsi: hisi_sas: Terminate STP reject quickly for v2 hw John Garry
2018-05-21 10:09 ` [PATCH 12/13] scsi: hisi_sas: Fix return value when get_free_slot() failed John Garry
2018-05-21 10:09 ` [PATCH 13/13] scsi: hisi_sas: Mark PHY as in reset for nexus reset John Garry
2018-05-29  2:47 ` [PATCH 00/13] hisi_sas: Misc improvements, bugfixes, etc Martin K. Petersen

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1526897365-228549-6-git-send-email-john.garry@huawei.com \
    --to=john.garry@huawei.com \
    --cc=chenxiang66@hisilicon.com \
    --cc=jejb@linux.vnet.ibm.com \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-scsi@vger.kernel.org \
    --cc=linuxarm@huawei.com \
    --cc=martin.petersen@oracle.com \
    --cc=tanxiaofei@huawei.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox

all inboxes | Powered by JetHome®