From: John Garry <john.garry@huawei.com>
To: <jejb@linux.vnet.ibm.com>, <martin.petersen@oracle.com>
Cc: <linux-scsi@vger.kernel.org>, <linuxarm@huawei.com>,
<linux-kernel@vger.kernel.org>,
Xiaofei Tan <tanxiaofei@huawei.com>,
"John Garry" <john.garry@huawei.com>
Subject: [PATCH 07/13] scsi: hisi_sas: Init disks after controller reset
Date: Mon, 21 May 2018 18:09:19 +0800 [thread overview]
Message-ID: <1526897365-228549-8-git-send-email-john.garry@huawei.com> (raw)
In-Reply-To: <1526897365-228549-1-git-send-email-john.garry@huawei.com>
From: Xiaofei Tan <tanxiaofei@huawei.com>
After the controller is reset, it is possible that the
disks attached still have outstanding IO to complete.
Thus, when the PHYs come back up after controller reset, it
is possible that these IOs complete at some unknown point
later.
We want to ensure that all IOs are complete after the
controller reset so that all associated IPTT and other
resources can be recycled safely.
To achieve this, re-init the disks by TMF or softreset
(in case of ATA devices).
If the init fails - maybe because the device was removed
or link has not come up - then do not release the device
resources, but rather rely on SCSI EH to handle the timeout
for these resources later on.
This patch also does some cleanup to hisi_sas_init_disk(), including
removing superfluous cases in the switch statement.
Signed-off-by: Xiaofei Tan <tanxiaofei@huawei.com>
Signed-off-by: John Garry <john.garry@huawei.com>
---
drivers/scsi/hisi_sas/hisi_sas_main.c | 19 ++++++++++++++++++-
1 file changed, 18 insertions(+), 1 deletion(-)
diff --git a/drivers/scsi/hisi_sas/hisi_sas_main.c b/drivers/scsi/hisi_sas/hisi_sas_main.c
index 7b8623b..0dfefdf 100644
--- a/drivers/scsi/hisi_sas/hisi_sas_main.c
+++ b/drivers/scsi/hisi_sas/hisi_sas_main.c
@@ -1259,6 +1259,23 @@ static void hisi_sas_rescan_topology(struct hisi_hba *hisi_hba, u32 old_state,
}
}
+static void hisi_sas_reset_init_all_devices(struct hisi_hba *hisi_hba)
+{
+ struct hisi_sas_device *sas_dev;
+ struct domain_device *device;
+ int i;
+
+ for (i = 0; i < HISI_SAS_MAX_DEVICES; i++) {
+ sas_dev = &hisi_hba->devices[i];
+ device = sas_dev->sas_device;
+
+ if ((sas_dev->dev_type == SAS_PHY_UNUSED) || !device)
+ continue;
+
+ hisi_sas_init_device(device);
+ }
+}
+
static int hisi_sas_controller_reset(struct hisi_hba *hisi_hba)
{
struct device *dev = hisi_hba->dev;
@@ -1287,7 +1304,6 @@ static int hisi_sas_controller_reset(struct hisi_hba *hisi_hba)
scsi_unblock_requests(shost);
goto out;
}
- hisi_sas_release_tasks(hisi_hba);
clear_bit(HISI_SAS_REJECT_CMD_BIT, &hisi_hba->flags);
@@ -1295,6 +1311,7 @@ static int hisi_sas_controller_reset(struct hisi_hba *hisi_hba)
hisi_hba->hw->phys_init(hisi_hba);
msleep(1000);
hisi_sas_refresh_port_id(hisi_hba);
+ hisi_sas_reset_init_all_devices(hisi_hba);
scsi_unblock_requests(shost);
state = hisi_hba->hw->get_phys_state(hisi_hba);
--
1.9.1
next prev parent reply other threads:[~2018-05-21 10:14 UTC|newest]
Thread overview: 15+ messages / expand[flat|nested] mbox.gz Atom feed top
2018-05-21 10:09 [PATCH 00/13] hisi_sas: Misc improvements, bugfixes, etc John Garry
2018-05-21 10:09 ` [PATCH 01/13] scsi: hisi_sas: Introduce hisi_sas_phy_set_linkrate() John Garry
2018-05-21 10:09 ` [PATCH 02/13] scsi: hisi_sas: change slot index allocation mode John Garry
2018-05-21 10:09 ` [PATCH 03/13] scsi: hisi_sas: Change common allocation mode of device id John Garry
2018-05-21 10:09 ` [PATCH 04/13] scsi: hisi_sas: Add LED feature for v3 hw John Garry
2018-05-21 10:09 ` [PATCH 05/13] scsi: hisi_sas: Reset disks when discovered John Garry
2018-05-21 10:09 ` [PATCH 06/13] scsi: hisi_sas: Create a scsi_host_template per HW module John Garry
2018-05-21 10:09 ` John Garry [this message]
2018-05-21 10:09 ` [PATCH 08/13] scsi: hisi_sas: Try wait commands before before controller reset John Garry
2018-05-21 10:09 ` [PATCH 09/13] scsi: hisi_sas: Include TMF elements in struct hisi_sas_slot John Garry
2018-05-21 10:09 ` [PATCH 10/13] scsi: hisi_sas: Add v2 hw force PHY function for internal ATA command John Garry
2018-05-21 10:09 ` [PATCH 11/13] scsi: hisi_sas: Terminate STP reject quickly for v2 hw John Garry
2018-05-21 10:09 ` [PATCH 12/13] scsi: hisi_sas: Fix return value when get_free_slot() failed John Garry
2018-05-21 10:09 ` [PATCH 13/13] scsi: hisi_sas: Mark PHY as in reset for nexus reset John Garry
2018-05-29 2:47 ` [PATCH 00/13] hisi_sas: Misc improvements, bugfixes, etc Martin K. Petersen
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1526897365-228549-8-git-send-email-john.garry@huawei.com \
--to=john.garry@huawei.com \
--cc=jejb@linux.vnet.ibm.com \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-scsi@vger.kernel.org \
--cc=linuxarm@huawei.com \
--cc=martin.petersen@oracle.com \
--cc=tanxiaofei@huawei.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®