From: Ludovic Barre <ludovic.Barre@st.com>
To: Ulf Hansson <ulf.hansson@linaro.org>, Rob Herring <robh+dt@kernel.org>
Cc: Maxime Coquelin <mcoquelin.stm32@gmail.com>,
Alexandre Torgue <alexandre.torgue@st.com>,
Gerald Baeza <gerald.baeza@st.com>,
<linux-arm-kernel@lists.infradead.org>,
<linux-kernel@vger.kernel.org>, <devicetree@vger.kernel.org>,
<linux-mmc@vger.kernel.org>, Ludovic Barre <ludovic.barre@st.com>
Subject: [PATCH 03/19] mmc: mmci: add datactrl block size variant property
Date: Tue, 12 Jun 2018 15:14:24 +0200 [thread overview]
Message-ID: <1528809280-31116-4-git-send-email-ludovic.Barre@st.com> (raw)
In-Reply-To: <1528809280-31116-1-git-send-email-ludovic.Barre@st.com>
From: Ludovic Barre <ludovic.barre@st.com>
This patch allows to define a datactrl block size
by variant, requested by STM32 sdmmc variant.
Signed-off-by: Ludovic Barre <ludovic.barre@st.com>
---
drivers/mmc/host/mmci.c | 13 +++++++++++--
drivers/mmc/host/mmci.h | 2 ++
2 files changed, 13 insertions(+), 2 deletions(-)
diff --git a/drivers/mmc/host/mmci.c b/drivers/mmc/host/mmci.c
index 7a15afd..9b25714 100644
--- a/drivers/mmc/host/mmci.c
+++ b/drivers/mmc/host/mmci.c
@@ -52,6 +52,7 @@ static struct variant_data variant_arm = {
.fifosize = 16 * 4,
.fifohalfsize = 8 * 4,
.datalength_bits = 16,
+ .datactrl_blocksz = 11,
.pwrreg_powerup = MCI_PWR_UP,
.f_max = 100000000,
.reversed_irq_handling = true,
@@ -65,6 +66,7 @@ static struct variant_data variant_arm_extended_fifo = {
.fifosize = 128 * 4,
.fifohalfsize = 64 * 4,
.datalength_bits = 16,
+ .datactrl_blocksz = 11,
.pwrreg_powerup = MCI_PWR_UP,
.f_max = 100000000,
.mmcimask1 = true,
@@ -78,6 +80,7 @@ static struct variant_data variant_arm_extended_fifo_hwfc = {
.fifohalfsize = 64 * 4,
.clkreg_enable = MCI_ARM_HWFCEN,
.datalength_bits = 16,
+ .datactrl_blocksz = 11,
.pwrreg_powerup = MCI_PWR_UP,
.f_max = 100000000,
.mmcimask1 = true,
@@ -92,6 +95,7 @@ static struct variant_data variant_u300 = {
.clkreg_enable = MCI_ST_U300_HWFCEN,
.clkreg_8bit_bus_enable = MCI_ST_8BIT_BUS,
.datalength_bits = 16,
+ .datactrl_blocksz = 11,
.datactrl_mask_sdio = MCI_DPSM_ST_SDIOEN,
.st_sdio = true,
.pwrreg_powerup = MCI_PWR_ON,
@@ -111,6 +115,7 @@ static struct variant_data variant_nomadik = {
.clkreg = MCI_CLK_ENABLE,
.clkreg_8bit_bus_enable = MCI_ST_8BIT_BUS,
.datalength_bits = 24,
+ .datactrl_blocksz = 11,
.datactrl_mask_sdio = MCI_DPSM_ST_SDIOEN,
.st_sdio = true,
.st_clkdiv = true,
@@ -133,6 +138,7 @@ static struct variant_data variant_ux500 = {
.clkreg_8bit_bus_enable = MCI_ST_8BIT_BUS,
.clkreg_neg_edge_enable = MCI_ST_UX500_NEG_EDGE,
.datalength_bits = 24,
+ .datactrl_blocksz = 11,
.datactrl_mask_sdio = MCI_DPSM_ST_SDIOEN,
.st_sdio = true,
.st_clkdiv = true,
@@ -160,6 +166,7 @@ static struct variant_data variant_ux500v2 = {
.clkreg_neg_edge_enable = MCI_ST_UX500_NEG_EDGE,
.datactrl_mask_ddrmode = MCI_DPSM_ST_DDRMODE,
.datalength_bits = 24,
+ .datactrl_blocksz = 11,
.datactrl_mask_sdio = MCI_DPSM_ST_SDIOEN,
.st_sdio = true,
.st_clkdiv = true,
@@ -187,6 +194,7 @@ static struct variant_data variant_stm32 = {
.clkreg_8bit_bus_enable = MCI_ST_8BIT_BUS,
.clkreg_neg_edge_enable = MCI_ST_UX500_NEG_EDGE,
.datalength_bits = 24,
+ .datactrl_blocksz = 11,
.datactrl_mask_sdio = MCI_DPSM_ST_SDIOEN,
.st_sdio = true,
.st_clkdiv = true,
@@ -208,6 +216,7 @@ static struct variant_data variant_qcom = {
.data_cmd_enable = MCI_CPSM_QCOM_DATCMD,
.blksz_datactrl4 = true,
.datalength_bits = 24,
+ .datactrl_blocksz = 11,
.pwrreg_powerup = MCI_PWR_UP,
.f_max = 208000000,
.explicit_mclk_control = true,
@@ -1399,13 +1408,13 @@ static int mmci_probe(struct amba_device *dev,
/*
* Block size can be up to 2048 bytes, but must be a power of two.
*/
- mmc->max_blk_size = 1 << 11;
+ mmc->max_blk_size = 1 << variant->datactrl_blocksz;
/*
* Limit the number of blocks transferred so that we don't overflow
* the maximum request size.
*/
- mmc->max_blk_count = mmc->max_req_size >> 11;
+ mmc->max_blk_count = mmc->max_req_size >> variant->datactrl_blocksz;
spin_lock_init(&host->lock);
diff --git a/drivers/mmc/host/mmci.h b/drivers/mmc/host/mmci.h
index f7cba35..27a2236 100644
--- a/drivers/mmc/host/mmci.h
+++ b/drivers/mmc/host/mmci.h
@@ -252,6 +252,7 @@ struct dma_chan;
* @blksz_datactrl4: true if Block size is at b4..b16 position in datactrl
* register
* @datactrl_mask_sdio: SDIO enable mask in datactrl register
+ * @datactrl_blksz: block size in power of two
* @pwrreg_powerup: power up value for MMCIPOWER register
* @f_max: maximum clk frequency supported by the controller.
* @signal_direction: input/out direction of bus signals can be indicated
@@ -284,6 +285,7 @@ struct variant_data {
unsigned int data_cmd_enable;
unsigned int datactrl_mask_ddrmode;
unsigned int datactrl_mask_sdio;
+ unsigned int datactrl_blocksz;
bool st_sdio;
bool st_clkdiv;
bool blksz_datactrl16;
--
2.7.4
next prev parent reply other threads:[~2018-06-12 13:20 UTC|newest]
Thread overview: 41+ messages / expand[flat|nested] mbox.gz Atom feed top
2018-06-12 13:14 [PATCH 00/19] mmc: mmci: add stm32 sdmmc variant Ludovic Barre
2018-06-12 13:14 ` [PATCH 01/19] mmc: mmci: regroup and define dma operations Ludovic Barre
2018-07-05 15:17 ` Ulf Hansson
2018-07-11 9:41 ` Ludovic BARRE
2018-07-11 12:16 ` Ulf Hansson
2018-07-12 9:09 ` Ludovic BARRE
2018-06-12 13:14 ` [PATCH 02/19] mmc: mmci: merge qcom dml feature into mmci dma Ludovic Barre
2018-07-05 15:26 ` Ulf Hansson
2018-07-11 15:19 ` Ludovic BARRE
2018-07-13 11:17 ` Ulf Hansson
2018-07-13 13:08 ` Ludovic BARRE
2018-07-30 15:15 ` Ulf Hansson
2018-06-12 13:14 ` Ludovic Barre [this message]
2018-06-12 13:14 ` [PATCH 04/19] mmc: mmci: expand startbiterr to irqmask and error check Ludovic Barre
2018-06-12 13:14 ` [PATCH 05/19] mmc: mmci: allow to overwrite clock/power procedure to specific variant Ludovic Barre
2018-07-05 13:48 ` Ulf Hansson
2018-07-11 12:19 ` Ludovic BARRE
2018-07-11 12:38 ` Ulf Hansson
2018-06-12 13:14 ` [PATCH 06/19] mmc: mmci: add variant properties to define cpsm & cmdresp bits Ludovic Barre
2018-07-05 14:20 ` Ulf Hansson
2018-06-12 13:14 ` [PATCH 07/19] mmc: mmci: add variant property to define dpsm bit Ludovic Barre
2018-06-12 13:14 ` [PATCH 08/19] mmc: mmci: add variant property to define irq pio mask Ludovic Barre
2018-06-12 13:14 ` [PATCH 09/19] mmc: mmci: add variant property to write datactrl before command Ludovic Barre
2018-06-12 13:14 ` [PATCH 10/19] mmc: mmci: add variant property to allow remain data Ludovic Barre
2018-07-05 13:55 ` Ulf Hansson
2018-06-12 13:14 ` [PATCH 11/19] mmc: mmci: add variant property to check specific data constraint Ludovic Barre
2018-06-12 13:14 ` [PATCH 12/19] mmc: mmci: add variant property to request a reset Ludovic Barre
2018-06-25 21:23 ` Rob Herring
2018-06-12 13:14 ` [PATCH 13/19] mmc: mmci: send stop cmd if a data command fail Ludovic Barre
2018-07-04 13:37 ` Ulf Hansson
2018-07-11 8:57 ` Ludovic BARRE
2018-06-12 13:14 ` [PATCH 14/19] mmc: mmci: add clock divider for stm32 sdmmc Ludovic Barre
2018-06-12 13:14 ` [PATCH 15/19] mmc: mmci: add stm32 sdmmc registers Ludovic Barre
2018-06-12 13:14 ` [PATCH 16/19] mmc: mmci: add DT bindings for STM32 sdmmc Ludovic Barre
2018-06-25 21:47 ` Rob Herring
2018-06-12 13:14 ` [PATCH 17/19] mmc: mmci: add stm32 sdmmc idma support Ludovic Barre
2018-06-12 13:14 ` [PATCH 18/19] mmc: mmci: add specific clk/pwr procedure for stm32 sdmmc Ludovic Barre
2018-07-05 14:49 ` Ulf Hansson
2018-06-12 13:14 ` [PATCH 19/19] mmc: mmci: add stm32 sdmmc variant Ludovic Barre
2018-06-29 13:51 ` [PATCH 00/19] " Ludovic BARRE
2018-06-29 15:18 ` Ulf Hansson
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1528809280-31116-4-git-send-email-ludovic.Barre@st.com \
--to=ludovic.barre@st.com \
--cc=alexandre.torgue@st.com \
--cc=devicetree@vger.kernel.org \
--cc=gerald.baeza@st.com \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-mmc@vger.kernel.org \
--cc=mcoquelin.stm32@gmail.com \
--cc=robh+dt@kernel.org \
--cc=ulf.hansson@linaro.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®