From: Lionel Debieve <lionel.debieve@st.com>
To: Herbert Xu <herbert@gondor.apana.org.au>,
"David S . Miller" <davem@davemloft.net>,
Maxime Coquelin <mcoquelin.stm32@gmail.com>,
"Alexandre Torgue" <alexandre.torgue@st.com>,
<linux-crypto@vger.kernel.org>,
<linux-arm-kernel@lists.infradead.org>,
<linux-kernel@vger.kernel.org>
Cc: Benjamin Gaignard <benjamin.gaignard@st.com>,
Fabien Dessenne <fabien.dessenne@st.com>,
Ludovic Barre <ludovic.barre@st.com>
Subject: [PATCH 2/3] crypto: stm32/hash - Add power management support
Date: Tue, 26 Jun 2018 14:52:45 +0200 [thread overview]
Message-ID: <1530017566-14779-3-git-send-email-lionel.debieve@st.com> (raw)
In-Reply-To: <1530017566-14779-1-git-send-email-lionel.debieve@st.com>
Adding pm and pm_runtime support to STM32 HASH.
Signed-off-by: Lionel Debieve <lionel.debieve@st.com>
---
drivers/crypto/stm32/stm32-hash.c | 71 +++++++++++++++++++++++++++++++++++++++
1 file changed, 71 insertions(+)
diff --git a/drivers/crypto/stm32/stm32-hash.c b/drivers/crypto/stm32/stm32-hash.c
index cdc96f1..d1d7233 100644
--- a/drivers/crypto/stm32/stm32-hash.c
+++ b/drivers/crypto/stm32/stm32-hash.c
@@ -31,6 +31,7 @@
#include <linux/module.h>
#include <linux/of_device.h>
#include <linux/platform_device.h>
+#include <linux/pm_runtime.h>
#include <linux/reset.h>
#include <crypto/engine.h>
@@ -121,6 +122,8 @@ enum stm32_hash_data_format {
#define HASH_QUEUE_LENGTH 16
#define HASH_DMA_THRESHOLD 50
+#define HASH_AUTOSUSPEND_DELAY 50
+
struct stm32_hash_ctx {
struct crypto_engine_ctx enginectx;
struct stm32_hash_dev *hdev;
@@ -814,12 +817,17 @@ static void stm32_hash_finish_req(struct ahash_request *req, int err)
rctx->flags |= HASH_FLAGS_ERRORS;
}
+ pm_runtime_mark_last_busy(hdev->dev);
+ pm_runtime_put_autosuspend(hdev->dev);
+
crypto_finalize_hash_request(hdev->engine, req, err);
}
static int stm32_hash_hw_init(struct stm32_hash_dev *hdev,
struct stm32_hash_request_ctx *rctx)
{
+ pm_runtime_get_sync(hdev->dev);
+
if (!(HASH_FLAGS_INIT & hdev->flags)) {
stm32_hash_write(hdev, HASH_CR, HASH_CR_INIT);
stm32_hash_write(hdev, HASH_STR, 0);
@@ -967,6 +975,8 @@ static int stm32_hash_export(struct ahash_request *req, void *out)
u32 *preg;
unsigned int i;
+ pm_runtime_get_sync(hdev->dev);
+
while (!(stm32_hash_read(hdev, HASH_SR) & HASH_SR_DATA_INPUT_READY))
cpu_relax();
@@ -982,6 +992,9 @@ static int stm32_hash_export(struct ahash_request *req, void *out)
for (i = 0; i < HASH_CSR_REGISTER_NUMBER; i++)
*preg++ = stm32_hash_read(hdev, HASH_CSR(i));
+ pm_runtime_mark_last_busy(hdev->dev);
+ pm_runtime_put_autosuspend(hdev->dev);
+
memcpy(out, rctx, sizeof(*rctx));
return 0;
@@ -1000,6 +1013,8 @@ static int stm32_hash_import(struct ahash_request *req, const void *in)
preg = rctx->hw_context;
+ pm_runtime_get_sync(hdev->dev);
+
stm32_hash_write(hdev, HASH_IMR, *preg++);
stm32_hash_write(hdev, HASH_STR, *preg++);
stm32_hash_write(hdev, HASH_CR, *preg);
@@ -1009,6 +1024,9 @@ static int stm32_hash_import(struct ahash_request *req, const void *in)
for (i = 0; i < HASH_CSR_REGISTER_NUMBER; i++)
stm32_hash_write(hdev, HASH_CSR(i), *preg++);
+ pm_runtime_mark_last_busy(hdev->dev);
+ pm_runtime_put_autosuspend(hdev->dev);
+
kfree(rctx->hw_context);
return 0;
@@ -1482,6 +1500,13 @@ static int stm32_hash_probe(struct platform_device *pdev)
return ret;
}
+ pm_runtime_set_autosuspend_delay(dev, HASH_AUTOSUSPEND_DELAY);
+ pm_runtime_use_autosuspend(dev);
+
+ pm_runtime_get_noresume(dev);
+ pm_runtime_set_active(dev);
+ pm_runtime_enable(dev);
+
hdev->rst = devm_reset_control_get(&pdev->dev, NULL);
if (!IS_ERR(hdev->rst)) {
reset_control_assert(hdev->rst);
@@ -1522,6 +1547,8 @@ static int stm32_hash_probe(struct platform_device *pdev)
dev_info(dev, "Init HASH done HW ver %x DMA mode %u\n",
stm32_hash_read(hdev, HASH_VER), hdev->dma_mode);
+ pm_runtime_put_sync(dev);
+
return 0;
err_algs:
@@ -1535,6 +1562,9 @@ static int stm32_hash_probe(struct platform_device *pdev)
if (hdev->dma_lch)
dma_release_channel(hdev->dma_lch);
+ pm_runtime_disable(dev);
+ pm_runtime_put_noidle(dev);
+
clk_disable_unprepare(hdev->clk);
return ret;
@@ -1543,11 +1573,16 @@ static int stm32_hash_probe(struct platform_device *pdev)
static int stm32_hash_remove(struct platform_device *pdev)
{
static struct stm32_hash_dev *hdev;
+ int ret;
hdev = platform_get_drvdata(pdev);
if (!hdev)
return -ENODEV;
+ ret = pm_runtime_get_sync(hdev->dev);
+ if (ret < 0)
+ return ret;
+
stm32_hash_unregister_algs(hdev);
crypto_engine_exit(hdev->engine);
@@ -1559,16 +1594,52 @@ static int stm32_hash_remove(struct platform_device *pdev)
if (hdev->dma_lch)
dma_release_channel(hdev->dma_lch);
+ pm_runtime_disable(hdev->dev);
+ pm_runtime_put_noidle(hdev->dev);
+
clk_disable_unprepare(hdev->clk);
return 0;
}
+#ifdef CONFIG_PM
+static int stm32_hash_runtime_suspend(struct device *dev)
+{
+ struct stm32_hash_dev *hdev = dev_get_drvdata(dev);
+
+ clk_disable_unprepare(hdev->clk);
+
+ return 0;
+}
+
+static int stm32_hash_runtime_resume(struct device *dev)
+{
+ struct stm32_hash_dev *hdev = dev_get_drvdata(dev);
+ int ret;
+
+ ret = clk_prepare_enable(hdev->clk);
+ if (ret) {
+ dev_err(hdev->dev, "Failed to prepare_enable clock\n");
+ return ret;
+ }
+
+ return 0;
+}
+#endif
+
+static const struct dev_pm_ops stm32_hash_pm_ops = {
+ SET_SYSTEM_SLEEP_PM_OPS(pm_runtime_force_suspend,
+ pm_runtime_force_resume)
+ SET_RUNTIME_PM_OPS(stm32_hash_runtime_suspend,
+ stm32_hash_runtime_resume, NULL)
+};
+
static struct platform_driver stm32_hash_driver = {
.probe = stm32_hash_probe,
.remove = stm32_hash_remove,
.driver = {
.name = "stm32-hash",
+ .pm = &stm32_hash_pm_ops,
.of_match_table = stm32_hash_of_match,
}
};
--
2.7.4
next prev parent reply other threads:[~2018-06-26 12:55 UTC|newest]
Thread overview: 5+ messages / expand[flat|nested] mbox.gz Atom feed top
2018-06-26 12:52 [PATCH 0/3] crypto: stm32 - Add power mamagement support Lionel Debieve
2018-06-26 12:52 ` [PATCH 1/3] crypto: stm32/cryp - Add power management support Lionel Debieve
2018-06-26 12:52 ` Lionel Debieve [this message]
2018-06-26 12:52 ` [PATCH 3/3] crypto: stm32/crc " Lionel Debieve
2018-07-08 16:43 ` [PATCH 0/3] crypto: stm32 - Add power mamagement support Herbert Xu
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1530017566-14779-3-git-send-email-lionel.debieve@st.com \
--to=lionel.debieve@st.com \
--cc=alexandre.torgue@st.com \
--cc=benjamin.gaignard@st.com \
--cc=davem@davemloft.net \
--cc=fabien.dessenne@st.com \
--cc=herbert@gondor.apana.org.au \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-crypto@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=ludovic.barre@st.com \
--cc=mcoquelin.stm32@gmail.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®