mirror of https://lore.kernel.org/lkml/
 help / color / mirror / Atom feed
From: Steve Longerbeam <slongerbeam@gmail.com>
To: linux-media@vger.kernel.org
Cc: Steve Longerbeam <steve_longerbeam@mentor.com>,
	linux-kernel@vger.kernel.org
Subject: [PATCH v5 00/17] media: imx: Switch to subdev notifiers
Date: Fri, 29 Jun 2018 11:49:44 -0700	[thread overview]
Message-ID: <1530298220-5097-1-git-send-email-steve_longerbeam@mentor.com> (raw)

This patchset converts the imx-media driver and its dependent
subdevs to use subdev notifiers.

There are a couple shortcomings in v4l2-core that prevented
subdev notifiers from working correctly in imx-media:

1. v4l2_async_notifier_fwnode_parse_endpoint() treats a fwnode
   endpoint that is not connected to a remote device as an error.
   But in the case of the video-mux subdev, this is not an error,
   it is OK if some of the mux inputs have no connection. Also,
   Documentation/devicetree/bindings/media/video-interfaces.txt explicitly
   states that the 'remote-endpoint' property is optional. So the first
   patch is a small modification to ignore empty endpoints in
   v4l2_async_notifier_fwnode_parse_endpoint() and allow
   __v4l2_async_notifier_parse_fwnode_endpoints() to continue to
   parse the remaining port endpoints of the device.

2. In the imx-media graph, multiple subdevs will encounter the same
   upstream subdev (such as the imx6-mipi-csi2 receiver), and so
   v4l2_async_notifier_parse_fwnode_endpoints() will add imx6-mipi-csi2
   multiple times. This is treated as an error by
   v4l2_async_notifier_register() later.

   To get around this problem, add an v4l2_async_notifier_add_subdev()
   which first verifies the provided asd does not already exist in the
   given notifier asd list or in other registered notifiers. If the asd
   exists, the function returns -EEXIST and it's up to the caller to
   decide if that is an error (in imx-media case it is never an error).

   Patches 2-5 deal with adding that support.

3. Patch 6 adds v4l2_async_register_fwnode_subdev(), which is a
   convenience function for parsing a subdev's fwnode port endpoints
   for connected remote subdevs, registering a subdev notifier, and
   then registering the sub-device itself.

4. Patches 7-14 update the subdev drivers to register a subdev notifier
   with endpoint parsing, and the changes to imx-media to support that.

5. Finally, the last 3 patches endeavor to completely remove support for
   the notifier->subdevs[] array in platform drivers and v4l2 core. All
   platform drivers are modified to make use of
   v4l2_async_notifier_add_subdev() and its related convenience functions
   to add asd's to the notifier @asd_list, and any allocation or reference
   to the notifier->subdevs[] array removed. After that large patch,
   notifier->subdevs[] array is stripped from v4l2-async and v4l2-subdev
   docs are updated to reflect the new method of adding asd's to notifiers.


Signed-off-by: Steve Longerbeam <steve_longerbeam@mentor.com>

Patches 07-14 (video-mux and the imx patches) are
Reviewed-by: Philipp Zabel <p.zabel@pengutronix.de>

Patches 01-14 are
Tested-by: Philipp Zabel <p.zabel@pengutronix.de>
on i.MX6 with Toshiba TC358743 connected via MIPI CSI-2.

History:
v5:
- see point 5 above.

v4:
- small non-functional code cleanup in video-mux.c.
- strip TODO for comparing custom asd's for equivalence.
- add three more convenience functions: v4l2_async_notifier_add_fwnode_subdev,
  v4l2_async_notifier_add_i2c_subdev, v4l2_async_notifier_add_devname_subdev.
- strip support in v4l2_async_register_fwnode_subdev for sub-devices
  that register from port nodes.

v3:
- code optimization in asd_equal(), and remove unneeded braces,
  suggested by Sakari Ailus.
- add a NULL asd pointer check to v4l2_async_notifier_asd_valid().
- fix an error-out path in v4l2_async_register_fwnode_subdev() that
  forgot to put device.

v2:
- don't pass an empty endpoint to the parse_endpoint callback, 
  v4l2_async_notifier_fwnode_parse_endpoint() now just ignores them
  and returns success.
- Fix a couple compile warnings and errors seen in i386 and sh archs.


Steve Longerbeam (17):
  media: v4l2-fwnode: ignore endpoints that have no remote port parent
  media: v4l2: async: Allow searching for asd of any type
  media: v4l2: async: Add v4l2_async_notifier_add_subdev
  media: v4l2: async: Add convenience functions to allocate and add
    asd's
  media: v4l2-fwnode: Switch to v4l2_async_notifier_add_subdev
  media: v4l2-fwnode: Add a convenience function for registering subdevs
    with notifiers
  media: platform: video-mux: Register a subdev notifier
  media: imx: csi: Register a subdev notifier
  media: imx: mipi csi-2: Register a subdev notifier
  media: staging/imx: of: Remove recursive graph walk
  media: staging/imx: Loop through all registered subdevs for media
    links
  media: staging/imx: Rename root notifier
  media: staging/imx: Switch to v4l2_async_notifier_add_*_subdev
  media: staging/imx: TODO: Remove one assumption about OF graph parsing
  media: platform: Switch to v4l2_async_notifier_add_subdev
  media: v4l2: async: Remove notifier subdevs array
  [media] v4l2-subdev.rst: Update doc regarding subdev descriptors

 Documentation/media/kapi/v4l2-subdev.rst          |  28 ++-
 drivers/media/pci/intel/ipu3/ipu3-cio2.c          |  10 +-
 drivers/media/platform/am437x/am437x-vpfe.c       |  80 ++++---
 drivers/media/platform/atmel/atmel-isc.c          |  13 +-
 drivers/media/platform/atmel/atmel-isi.c          |  15 +-
 drivers/media/platform/cadence/cdns-csi2rx.c      |  26 +-
 drivers/media/platform/davinci/vpif_capture.c     |  47 ++--
 drivers/media/platform/davinci/vpif_display.c     |  23 +-
 drivers/media/platform/exynos4-is/media-dev.c     |  30 ++-
 drivers/media/platform/exynos4-is/media-dev.h     |   1 -
 drivers/media/platform/pxa_camera.c               |  23 +-
 drivers/media/platform/qcom/camss-8x16/camss.c    |  74 +++---
 drivers/media/platform/qcom/camss-8x16/camss.h    |   2 +-
 drivers/media/platform/rcar-vin/rcar-csi2.c       |  20 +-
 drivers/media/platform/rcar_drif.c                |  18 +-
 drivers/media/platform/renesas-ceu.c              |  51 ++--
 drivers/media/platform/soc_camera/soc_camera.c    |  31 ++-
 drivers/media/platform/stm32/stm32-dcmi.c         |  22 +-
 drivers/media/platform/ti-vpe/cal.c               |  34 ++-
 drivers/media/platform/video-mux.c                |  36 ++-
 drivers/media/platform/xilinx/xilinx-vipp.c       | 154 ++++++------
 drivers/media/platform/xilinx/xilinx-vipp.h       |   4 -
 drivers/media/v4l2-core/v4l2-async.c              | 276 +++++++++++++++++-----
 drivers/media/v4l2-core/v4l2-fwnode.c             | 194 +++++++--------
 drivers/staging/media/imx/TODO                    |  29 +--
 drivers/staging/media/imx/imx-media-csi.c         |  55 ++++-
 drivers/staging/media/imx/imx-media-dev.c         | 143 +++--------
 drivers/staging/media/imx/imx-media-internal-sd.c |   5 +-
 drivers/staging/media/imx/imx-media-of.c          | 106 +--------
 drivers/staging/media/imx/imx-media.h             |   6 +-
 drivers/staging/media/imx/imx6-mipi-csi2.c        |  31 ++-
 include/media/v4l2-async.h                        |  90 ++++++-
 include/media/v4l2-fwnode.h                       |  58 ++++-
 33 files changed, 966 insertions(+), 769 deletions(-)

-- 
2.7.4


             reply	other threads:[~2018-06-29 18:50 UTC|newest]

Thread overview: 24+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2018-06-29 18:49 Steve Longerbeam [this message]
2018-06-29 18:49 ` [PATCH v5 01/17] media: v4l2-fwnode: ignore endpoints that have no remote port parent Steve Longerbeam
2018-06-29 18:49 ` [PATCH v5 02/17] media: v4l2: async: Allow searching for asd of any type Steve Longerbeam
2018-06-29 18:49 ` [PATCH v5 03/17] media: v4l2: async: Add v4l2_async_notifier_add_subdev Steve Longerbeam
2018-06-29 18:49 ` [PATCH v5 04/17] media: v4l2: async: Add convenience functions to allocate and add asd's Steve Longerbeam
2018-06-29 18:49 ` [PATCH v5 05/17] media: v4l2-fwnode: Switch to v4l2_async_notifier_add_subdev Steve Longerbeam
2018-06-29 18:49 ` [PATCH v5 06/17] media: v4l2-fwnode: Add a convenience function for registering subdevs with notifiers Steve Longerbeam
2018-06-29 18:49 ` [PATCH v5 07/17] media: platform: video-mux: Register a subdev notifier Steve Longerbeam
2018-06-29 18:49 ` [PATCH v5 08/17] media: imx: csi: " Steve Longerbeam
2018-06-29 18:49 ` [PATCH v5 09/17] media: imx: mipi csi-2: " Steve Longerbeam
2018-06-29 18:49 ` [PATCH v5 10/17] media: staging/imx: of: Remove recursive graph walk Steve Longerbeam
2018-06-29 18:49 ` [PATCH v5 11/17] media: staging/imx: Loop through all registered subdevs for media links Steve Longerbeam
2018-06-29 18:49 ` [PATCH v5 12/17] media: staging/imx: Rename root notifier Steve Longerbeam
2018-06-29 18:49 ` [PATCH v5 13/17] media: staging/imx: Switch to v4l2_async_notifier_add_*_subdev Steve Longerbeam
2018-06-29 18:49 ` [PATCH v5 14/17] media: staging/imx: TODO: Remove one assumption about OF graph parsing Steve Longerbeam
2018-06-29 18:49 ` [PATCH v5 15/17] media: platform: Switch to v4l2_async_notifier_add_subdev Steve Longerbeam
2018-07-02  6:09   ` Dan Carpenter
2018-07-07 21:06     ` Steve Longerbeam
2018-07-02 11:23   ` Sakari Ailus
2018-07-07 21:09     ` Steve Longerbeam
2018-06-29 18:50 ` [PATCH v5 16/17] media: v4l2: async: Remove notifier subdevs array Steve Longerbeam
2018-06-29 18:50 ` [PATCH v5 17/17] [media] v4l2-subdev.rst: Update doc regarding subdev descriptors Steve Longerbeam
2018-07-02  9:51 ` [PATCH v5 00/17] media: imx: Switch to subdev notifiers Sakari Ailus
2018-07-07 21:15   ` Steve Longerbeam

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1530298220-5097-1-git-send-email-steve_longerbeam@mentor.com \
    --to=slongerbeam@gmail.com \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-media@vger.kernel.org \
    --cc=steve_longerbeam@mentor.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox

all inboxes | Powered by JetHome®