[PATCH 1/2] staging: fbtft: Fix line over 80 characters

[PATCH 1/2] staging: fbtft: Fix line over 80 characters

[Matthias Wolf]

Fix checkpatch line over 80 characters where it seemed appropriate

Signed-off-by: Matthias Wolf <der_wolf_@web.de>
Signed-off-by: Felix Siegel <felix.siegel@stud.uni-hannover.de>
Signed-off-by: Tim Cofala <cofala@stud.uni-hannover.de>
---
 drivers/staging/fbtft/fb_s6d02a1.c | 30 ++++++++++++++++++++----------
 1 file changed, 20 insertions(+), 10 deletions(-)

diff --git a/drivers/staging/fbtft/fb_s6d02a1.c b/drivers/staging/fbtft/fb_s6d02a1.c
index 7529576..55513a3 100644
--- a/drivers/staging/fbtft/fb_s6d02a1.c
+++ b/drivers/staging/fbtft/fb_s6d02a1.c
@@ -21,20 +21,27 @@ static const s16 default_init_sequence[] = {
 
 	-1, 0xfc, 0x5a, 0x5a,
 
-	-1, 0xfa, 0x02, 0x1f, 0x00, 0x10, 0x22, 0x30, 0x38, 0x3A, 0x3A, 0x3A, 0x3A, 0x3A, 0x3d, 0x02, 0x01,
+	-1, 0xfa, 0x02, 0x1f, 0x00, 0x10, 0x22, 0x30, 0x38,
+	0x3A, 0x3A, 0x3A, 0x3A, 0x3A, 0x3d, 0x02, 0x01,
 
-	-1, 0xfb, 0x21, 0x00, 0x02, 0x04, 0x07, 0x0a, 0x0b, 0x0c, 0x0c, 0x16, 0x1e, 0x30, 0x3f, 0x01, 0x02,
+	-1, 0xfb, 0x21, 0x00, 0x02, 0x04, 0x07, 0x0a, 0x0b,
+	0x0c, 0x0c, 0x16, 0x1e, 0x30, 0x3f, 0x01, 0x02,
 
 	/* power setting sequence */
-	-1, 0xfd, 0x00, 0x00, 0x00, 0x17, 0x10, 0x00, 0x01, 0x01, 0x00, 0x1f, 0x1f,
+	-1, 0xfd, 0x00, 0x00, 0x00, 0x17, 0x10, 0x00, 0x01,
+	0x01, 0x00, 0x1f, 0x1f,
 
-	-1, 0xf4, 0x00, 0x00, 0x00, 0x00, 0x00, 0x3f, 0x3f, 0x07, 0x00, 0x3C, 0x36, 0x00, 0x3C, 0x36, 0x00,
+	-1, 0xf4, 0x00, 0x00, 0x00, 0x00, 0x00, 0x3f, 0x3f,
+	0x07, 0x00, 0x3C, 0x36, 0x00, 0x3C, 0x36, 0x00,
 
-	-1, 0xf5, 0x00, 0x70, 0x66, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x6d, 0x66, 0x06,
+	-1, 0xf5, 0x00, 0x70, 0x66, 0x00, 0x00, 0x00, 0x00,
+	0x00, 0x00, 0x00, 0x6d, 0x66, 0x06,
 
-	-1, 0xf6, 0x02, 0x00, 0x3f, 0x00, 0x00, 0x00, 0x02, 0x00, 0x06, 0x01, 0x00,
+	-1, 0xf6, 0x02, 0x00, 0x3f, 0x00, 0x00, 0x00, 0x02,
+	0x00, 0x06, 0x01, 0x00,
 
-	-1, 0xf2, 0x00, 0x01, 0x03, 0x08, 0x08, 0x04, 0x00, 0x00, 0x00, 0x00, 0x00, 0x01, 0x00, 0x00, 0x04, 0x08, 0x08,
+	-1, 0xf2, 0x00, 0x01, 0x03, 0x08, 0x08, 0x04, 0x00,
+	0x00, 0x00, 0x00, 0x00, 0x01, 0x00, 0x00, 0x04, 0x08, 0x08,
 
 	-1, 0xf8, 0x11,
 
@@ -54,7 +61,8 @@ static const s16 default_init_sequence[] = {
 	-1, 0xf3, 0x00, 0x0f,
 	-2, 50,
 
-	-1, 0xf4, 0x00, 0x04, 0x00, 0x00, 0x00, 0x3f, 0x3f, 0x07, 0x00, 0x3C, 0x36, 0x00, 0x3C, 0x36, 0x00,
+	-1, 0xf4, 0x00, 0x04, 0x00, 0x00, 0x00, 0x3f, 0x3f,
+	0x07, 0x00, 0x3C, 0x36, 0x00, 0x3C, 0x36, 0x00,
 	-2, 50,
 
 	-1, 0xf3, 0x00, 0x1f,
@@ -65,9 +73,11 @@ static const s16 default_init_sequence[] = {
 	-1, 0xf3, 0x00, 0xff,
 	-2, 50,
 
-	-1, 0xfd, 0x00, 0x00, 0x00, 0x17, 0x10, 0x00, 0x00, 0x01, 0x00, 0x16, 0x16,
+	-1, 0xfd, 0x00, 0x00, 0x00, 0x17, 0x10, 0x00, 0x00,
+	0x01, 0x00, 0x16, 0x16,
 
-	-1, 0xf4, 0x00, 0x09, 0x00, 0x00, 0x00, 0x3f, 0x3f, 0x07, 0x00, 0x3C, 0x36, 0x00, 0x3C, 0x36, 0x00,
+	-1, 0xf4, 0x00, 0x09, 0x00, 0x00, 0x00, 0x3f, 0x3f,
+	0x07, 0x00, 0x3C, 0x36, 0x00, 0x3C, 0x36, 0x00,
 
 	/* initializing sequence */
 
-- 
2.7.4

[PATCH 2/2] staging: fbtft: Fix line continuation

[Matthias Wolf]

Fix checkpatch warning: avoid unnecessary line continuation
to allow grepping of whole error message.

Signed-off-by: Matthias Wolf <der_wolf_@web.de>
Signed-off-by: Felix Siegel <felix.siegel@stud.uni-hannover.de>
Signed-off-by: Tim Cofala <cofala@stud.uni-hannover.de>
---
 drivers/staging/fbtft/fb_ssd1351.c | 6 ++----
 1 file changed, 2 insertions(+), 4 deletions(-)

diff --git a/drivers/staging/fbtft/fb_ssd1351.c b/drivers/staging/fbtft/fb_ssd1351.c
index b8ef75f..1b92691 100644
--- a/drivers/staging/fbtft/fb_ssd1351.c
+++ b/drivers/staging/fbtft/fb_ssd1351.c
@@ -126,16 +126,14 @@ static int set_gamma(struct fbtft_par *par, u32 *curves)
 	for (i = 0; i < 63; i++) {
 		if (i > 0 && curves[i] < 2) {
 			dev_err(par->info->device,
-				"Illegal value in Grayscale Lookup Table at index %d. " \
-				"Must be greater than 1\n", i);
+				"Illegal value in Grayscale Lookup Table at index %d. Must be greater than 1\n", i);
 			return -EINVAL;
 		}
 		acc += curves[i];
 		tmp[i] = acc;
 		if (acc > 180) {
 			dev_err(par->info->device,
-				"Illegal value(s) in Grayscale Lookup Table. " \
-				"At index=%d, the accumulated value has exceeded 180\n", i);
+				"Illegal value(s) in Grayscale Lookup Table. At index=%d, the accumulated value has exceeded 180\n", i);
 			return -EINVAL;
 		}
 	}
-- 
2.7.4