From: Connor McAdams <conmanx360@gmail.com>
To: unlisted-recipients:; (no To-header on input)
Cc: conmanx360@gmail.com, Jaroslav Kysela <perex@perex.cz>,
Takashi Iwai <tiwai@suse.com>,
Takashi Sakamoto <o-takashi@sakamocchi.jp>,
Alastair Bridgewater <alastair.bridgewater@gmail.com>,
alsa-devel@alsa-project.org, linux-kernel@vger.kernel.org
Subject: [PATCH 07/11] ALSA: hda/ca0132 - Add ZxR DSP post-download commands
Date: Sat, 29 Sep 2018 23:03:22 -0400 [thread overview]
Message-ID: <1538276607-30234-8-git-send-email-conmanx360@gmail.com> (raw)
In-Reply-To: <1538276607-30234-1-git-send-email-conmanx360@gmail.com>
This patch adds commands for setting up the ZxR after the DSP is
downloaded. The ZxR already shares most of the post-download commands
from the regular Sound Blaster Z.
Signed-off-by: Connor McAdams <conmanx360@gmail.com>
---
sound/pci/hda/patch_ca0132.c | 37 ++++++++++++++++++++++++-------------
1 file changed, 24 insertions(+), 13 deletions(-)
diff --git a/sound/pci/hda/patch_ca0132.c b/sound/pci/hda/patch_ca0132.c
index 6e48c3d..729766a 100644
--- a/sound/pci/hda/patch_ca0132.c
+++ b/sound/pci/hda/patch_ca0132.c
@@ -6854,19 +6854,29 @@ static void sbz_chipio_startup_data(struct hda_codec *codec)
chipio_set_stream_channels(codec, 0x0C, 6);
chipio_set_stream_control(codec, 0x0C, 1);
/* No clue what these control */
- chipio_write_no_mutex(codec, 0x190030, 0x0001e0c0);
- chipio_write_no_mutex(codec, 0x190034, 0x0001e1c1);
- chipio_write_no_mutex(codec, 0x190038, 0x0001e4c2);
- chipio_write_no_mutex(codec, 0x19003c, 0x0001e5c3);
- chipio_write_no_mutex(codec, 0x190040, 0x0001e2c4);
- chipio_write_no_mutex(codec, 0x190044, 0x0001e3c5);
- chipio_write_no_mutex(codec, 0x190048, 0x0001e8c6);
- chipio_write_no_mutex(codec, 0x19004c, 0x0001e9c7);
- chipio_write_no_mutex(codec, 0x190050, 0x0001ecc8);
- chipio_write_no_mutex(codec, 0x190054, 0x0001edc9);
- chipio_write_no_mutex(codec, 0x190058, 0x0001eaca);
- chipio_write_no_mutex(codec, 0x19005c, 0x0001ebcb);
-
+ if (spec->quirk == QUIRK_SBZ) {
+ chipio_write_no_mutex(codec, 0x190030, 0x0001e0c0);
+ chipio_write_no_mutex(codec, 0x190034, 0x0001e1c1);
+ chipio_write_no_mutex(codec, 0x190038, 0x0001e4c2);
+ chipio_write_no_mutex(codec, 0x19003c, 0x0001e5c3);
+ chipio_write_no_mutex(codec, 0x190040, 0x0001e2c4);
+ chipio_write_no_mutex(codec, 0x190044, 0x0001e3c5);
+ chipio_write_no_mutex(codec, 0x190048, 0x0001e8c6);
+ chipio_write_no_mutex(codec, 0x19004c, 0x0001e9c7);
+ chipio_write_no_mutex(codec, 0x190050, 0x0001ecc8);
+ chipio_write_no_mutex(codec, 0x190054, 0x0001edc9);
+ chipio_write_no_mutex(codec, 0x190058, 0x0001eaca);
+ chipio_write_no_mutex(codec, 0x19005c, 0x0001ebcb);
+ } else if (spec->quirk == QUIRK_ZXR) {
+ chipio_write_no_mutex(codec, 0x190038, 0x000140c2);
+ chipio_write_no_mutex(codec, 0x19003c, 0x000141c3);
+ chipio_write_no_mutex(codec, 0x190040, 0x000150c4);
+ chipio_write_no_mutex(codec, 0x190044, 0x000151c5);
+ chipio_write_no_mutex(codec, 0x190050, 0x000142c8);
+ chipio_write_no_mutex(codec, 0x190054, 0x000143c9);
+ chipio_write_no_mutex(codec, 0x190058, 0x000152ca);
+ chipio_write_no_mutex(codec, 0x19005c, 0x000153cb);
+ }
chipio_write_no_mutex(codec, 0x19042c, 0x00000001);
codec_dbg(codec, "Startup Data exited, mutex released.\n");
@@ -8161,6 +8171,7 @@ static int ca0132_init(struct hda_codec *codec)
r3d_setup_defaults(codec);
break;
case QUIRK_SBZ:
+ case QUIRK_ZXR:
sbz_setup_defaults(codec);
break;
case QUIRK_AE5:
--
2.7.4
next prev parent reply other threads:[~2018-09-30 3:04 UTC|newest]
Thread overview: 18+ messages / expand[flat|nested] mbox.gz Atom feed top
2018-09-30 3:03 [PATCH 00/11] Add ZxR support + bugfixes Connor McAdams
2018-09-30 3:03 ` [PATCH 01/11] ALSA: hda/ca0132 - Fix AE-5 control type Connor McAdams
2018-09-30 3:03 ` [PATCH 02/11] ALSA: hda/ca0132 - Fix surround sound with output effects Connor McAdams
2018-09-30 3:03 ` [PATCH 03/11] ALSA: hda/ca0132 - Add ZxR quirks + new quirk check function Connor McAdams
2018-09-30 3:03 ` [PATCH 04/11] ALSA: hda/ca0132 - Add ZxR pincfg Connor McAdams
2018-09-30 3:03 ` [PATCH 05/11] ALSA: hda/ca0132 - Add DBpro hda_codec_ops Connor McAdams
2018-10-01 2:10 ` Takashi Sakamoto
2018-09-30 3:03 ` [PATCH 06/11] ALSA: hda/ca0132 - Add ZxR init commands Connor McAdams
2018-09-30 3:03 ` Connor McAdams [this message]
2018-09-30 3:03 ` [PATCH 08/11] ALSA: hda/ca0132 - Add ZxR input/output select commands Connor McAdams
2018-09-30 3:03 ` [PATCH 09/11] ALSA: hda/ca0132 - Remove input select enum for ZxR Connor McAdams
2018-09-30 3:03 ` [PATCH 10/11] ALSA: hda/ca0132 - Add ZxR 600 ohm gain control Connor McAdams
2018-10-01 2:22 ` Takashi Sakamoto
2018-09-30 3:03 ` [PATCH 11/11] ALSA: hda/ca0132 - Add ZxR exit commands Connor McAdams
2018-10-01 14:03 ` [PATCH 00/11] Add ZxR support + bugfixes Takashi Sakamoto
2018-10-02 15:23 ` Takashi Iwai
2018-10-07 17:05 ` Connor McAdams
2018-10-08 15:10 ` Takashi Iwai
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1538276607-30234-8-git-send-email-conmanx360@gmail.com \
--to=conmanx360@gmail.com \
--cc=alastair.bridgewater@gmail.com \
--cc=alsa-devel@alsa-project.org \
--cc=linux-kernel@vger.kernel.org \
--cc=o-takashi@sakamocchi.jp \
--cc=perex@perex.cz \
--cc=tiwai@suse.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
Powered by JetHome