* kmemleak: Early log buffer exceeded (525980) during boot @ 2018-11-08 21:23 Qian Cai 2018-11-10 15:08 ` Qian Cai 0 siblings, 1 reply; 7+ messages in thread From: Qian Cai @ 2018-11-08 21:23 UTC (permalink / raw) To: linux-kernel; +Cc: Catalin Marinas The maximum value for DEBUG_KMEMLEAK_EARLY_LOG_SIZE is only 40000, so it disables kmemleak every time on this aarch64 server running the latest mainline (b00d209). # echo scan > /sys/kernel/debug/kmemleak -bash: echo: write error: Device or resource busy Any idea on how to enable kmemleak there? ^ permalink raw reply [flat|nested] 7+ messages in thread
* Re: kmemleak: Early log buffer exceeded (525980) during boot 2018-11-08 21:23 kmemleak: Early log buffer exceeded (525980) during boot Qian Cai @ 2018-11-10 15:08 ` Qian Cai 2018-11-10 16:59 ` Catalin Marinas 0 siblings, 1 reply; 7+ messages in thread From: Qian Cai @ 2018-11-10 15:08 UTC (permalink / raw) To: open list; +Cc: Catalin Marinas, linux-mm > On Nov 8, 2018, at 4:23 PM, Qian Cai <cai@gmx.us> wrote: > > The maximum value for DEBUG_KMEMLEAK_EARLY_LOG_SIZE is only 40000, so it > disables kmemleak every time on this aarch64 server running the latest mainline > (b00d209). > > # echo scan > /sys/kernel/debug/kmemleak > -bash: echo: write error: Device or resource busy > > Any idea on how to enable kmemleak there? I have managed to hard-code DEBUG_KMEMLEAK_EARLY_LOG_SIZE to 600000, diff --git a/mm/kmemleak.c b/mm/kmemleak.c index 877de4fa0720..c10119102c10 100644 --- a/mm/kmemleak.c +++ b/mm/kmemleak.c @@ -280,7 +280,7 @@ struct early_log { /* early logging buffer and current position */ static struct early_log - early_log[CONFIG_DEBUG_KMEMLEAK_EARLY_LOG_SIZE] __initdata; + early_log[600000] __initdata; static int crt_early_log __initdata; static void kmemleak_disable(void); Even though kmemleak is enabled, there are continuous soft-lockups and eventually a kernel panic. Is it normal that kmemleak not going to work with large systems (this aarch64 server has 64-CPU and 100G memory)? [39418.164687] watchdog: BUG: soft lockup - CPU#20 stuck for 23s! [kworker/20:1:361] [39418.172172] Modules linked in: vfat fat ses enclosure ipmi_ssif ghash_ce sha2_ce sha256_arm64 sha1_ce sg ipmi_si ipmi_devintf ipmi_msghandler sbsa_gwdt sch_fq_codel xfs libcrc32c marvell mpt3sas raid_class mlx5_core hibmc_drm drm_kms_helper syscopyarea sysfillrect sysimgblt fb_sys_fops ttm drm ixgbe hisi_sas_v2_hw igb hisi_sas_main libsas hns_dsaf mlxfw hns_enet_drv devlink i2c_designware_platform mdio i2c_algo_bit scsi_transport_sas ehci_platform i2c_designware_core hns_mdio hnae dm_mirror dm_region_hash dm_log dm_mod [39418.218197] irq event stamp: 56 [39418.221346] hardirqs last enabled at (55): [<ffff200008fab57c>] _raw_spin_unlock_irq+0x3c/0x78 [39418.230040] hardirqs last disabled at (56): [<ffff200008f9ef64>] __schedule+0x1d4/0xda0 [39418.238040] softirqs last enabled at (0): [<ffff20000811a668>] copy_process.isra.2+0xda0/0x2e20 [39418.246820] softirqs last disabled at (0): [<0000000000000000>] (null) [39418.254215] CPU: 20 PID: 361 Comm: kworker/20:1 Tainted: G B W L 4.20.0-rc1+ #3 [39418.262472] Hardware name: Huawei TaiShan 2280 /BC11SPCD, BIOS 1.50 06/01/2018 [39418.269695] Workqueue: events free_obj_work [39418.273875] pstate: 20000005 (nzCv daif -PAN -UAO) [39418.278662] pc : _raw_spin_unlock_irqrestore+0x84/0x88 [39418.283795] lr : _raw_spin_unlock_irqrestore+0x80/0x88 [39418.288926] sp : ffff801ec3556a80 [39418.292234] x29: ffff801ec3556a80 x28: 1ffff003d86aad98 [39418.297542] x27: ffff2000111a1000 x26: ffff2000111bcd80 [39418.302850] x25: ffff801ebc5886c8 x24: ffff801ebc5886d0 [39418.308158] x23: ffff8019ce23b280 x22: ffff2000111a1c40 [39418.313465] x21: ffff2000087dc9fc x20: ffff2000111bcd88 [39418.318773] x19: 0000000000000000 x18: 0000000000000000 [39418.324080] x17: 0000000000000000 x16: 0000000000000000 [39418.329387] x15: 0000000000001880 x14: ffffffffffff8650 [39418.334694] x13: 0000000000000000 x12: 000000000000005c [39418.340001] x11: 00000000f2f2f2f2 x10: dfff200000000000 [39418.345309] x9 : ffff20000f669848 x8 : 00000000f2f2f200 [39418.350616] x7 : ffff2000087dc7ec x6 : 0000000041b58ab3 [39418.355924] x5 : dfff200000000000 x4 : dfff200000000000 [39418.361231] x3 : 1ffff003d86aace4 x2 : 0000000000000003 [39418.366538] x1 : bdf5a6abd51de100 x0 : 0000000000000000 [39418.371846] Call trace: [39418.374292] _raw_spin_unlock_irqrestore+0x84/0x88 [39418.379079] __debug_object_init+0x39c/0x918 [39418.383342] debug_object_activate+0x218/0x370 [39418.387782] __call_rcu+0xdc/0xad0 [39418.391178] call_rcu+0x30/0x40 [39418.394315] put_object+0x50/0x68 [39418.397624] __delete_object+0xfc/0x140 [39418.401455] delete_object_full+0x2c/0x38 [39418.405459] kmemleak_free+0xa4/0xb0 [39418.409030] kmem_cache_free+0x2e4/0x3a8 [39418.412947] free_obj_work+0x300/0x468 [39418.416692] process_one_work+0x60c/0xd90 [39418.420695] worker_thread+0x13c/0xa70 [39418.424440] kthread+0x1c4/0x1d0 [39418.427663] ret_from_fork+0x10/0x1c [39423.435417] BUG: workqueue lockup - pool cpus=20 node=1 flags=0x0 nice=0 stuck for 3608s! [39423.443658] Showing busy workqueues and worker pools: [39423.449354] workqueue events: flags=0x0 [39423.453272] pwq 64: cpus=32 node=2 flags=0x0 nice=0 active=1/256 [39423.459456] in-flight: 917:key_garbage_collector [39423.465289] pwq 40: cpus=20 node=1 flags=0x0 nice=0 active=2/256 [39423.471476] in-flight: 361:free_obj_work [39423.475749] pending: free_obj_work [39423.480087] pwq 26: cpus=13 node=0 flags=0x0 nice=0 active=1/256 [39423.486273] in-flight: 377:hns_nic_service_task [hns_enet_drv] [39423.493235] workqueue mm_percpu_wq: flags=0x8 [39423.498302] pwq 40: cpus=20 node=1 flags=0x0 nice=0 active=1/256 [39423.504488] pending: vmstat_update [39423.509247] workqueue ixgbe: flags=0xe000a [39423.513345] pwq 128: cpus=0-63 flags=0x4 nice=0 active=1/1 [39423.519007] in-flight: 16574:ixgbe_service_task [ixgbe] [39423.526001] pool 26: cpus=13 node=0 flags=0x0 nice=0 hung=0s workers=2 idle: 78 [39423.533349] pool 40: cpus=20 node=1 flags=0x0 nice=0 hung=3608s workers=3 idle: 906 114 [39423.542008] pool 64: cpus=32 node=2 flags=0x0 nice=0 hung=71s workers=3 idle: 9912 1737 [39454.155305] BUG: workqueue lockup - pool cpus=20 node=1 flags=0x0 nice=0 stuck for 3638s! [39454.163547] Showing busy workqueues and worker pools: [39454.169248] workqueue events: flags=0x0 [39454.173164] pwq 64: cpus=32 node=2 flags=0x0 nice=0 active=1/256 [39454.179349] in-flight: 917:key_garbage_collector [39454.185164] pwq 40: cpus=20 node=1 flags=0x0 nice=0 active=2/256 [39454.191351] in-flight: 361:free_obj_work [39454.195624] pending: free_obj_work [39454.199973] pwq 26: cpus=13 node=0 flags=0x0 nice=0 active=1/256 [39454.206159] in-flight: 377:hns_nic_service_task [hns_enet_drv] [39454.213117] workqueue mm_percpu_wq: flags=0x8 [39454.218185] pwq 40: cpus=20 node=1 flags=0x0 nice=0 active=1/256 [39454.224371] pending: vmstat_update [39454.229707] pool 26: cpus=13 node=0 flags=0x0 nice=0 hung=0s workers=2 idle: 78 [39454.237672] pool 40: cpus=20 node=1 flags=0x0 nice=0 hung=3638s workers=3 idle: 906 114 [39454.246320] pool 64: cpus=32 node=2 flags=0x0 nice=0 hung=26s workers=3 idle: 9912 1737 [39480.842570] WARNING: CPU: 8 PID: 2290 at mm/page_alloc.c:4270 __alloc_pages_nodemask+0x1f9c/0x2028 [39480.845824] kmemleak: Cannot allocate a kmemleak_object structure [39482.325003] Kernel panic - not syncing: corrupted stack end detected inside scheduler [39482.332839] CPU: 1 PID: 1319 Comm: systemd-journal Tainted: G B W L 4.20.0-rc1+ #3 [39482.341358] Hardware name: Huawei TaiShan 2280 /BC11SPCD, BIOS 1.50 06/01/2018 [39482.348577] Call trace: [39482.351029] dump_backtrace+0x0/0x2c8 [39482.354688] show_stack+0x24/0x30 [39482.358001] dump_stack+0x118/0x19c [39482.361484] panic+0x1b8/0x31c [39482.364536] schedule+0x0/0x240 [39482.367673] preempt_schedule_common+0x3c/0x78 [39482.372110] _cond_resched+0xfc/0x108 [39482.375769] shrink_node_memcg+0x368/0x9c0 [39482.379861] shrink_node+0x200/0x940 [39482.383431] do_try_to_free_pages+0x234/0x7d0 [39482.387784] try_to_free_pages+0x228/0x6b0 [39482.391877] __alloc_pages_nodemask+0xcbc/0x2028 [39482.396492] alloc_pages_vma+0x1a4/0x208 [39482.400412] __read_swap_cache_async+0x4fc/0x858 [39482.405025] read_swap_cache_async+0xa4/0x100 [39482.409378] swap_cluster_readahead+0x598/0x650 [39482.413904] shmem_swapin+0xd4/0x150 [39482.417477] shmem_getpage_gfp+0xf50/0x1c48 [39482.421657] shmem_fault+0x140/0x340 [39482.425229] __do_fault+0xd0/0x440 [39482.428625] do_fault+0x54c/0xf48 [39482.431935] __handle_mm_fault+0x4c0/0x928 [39482.436028] handle_mm_fault+0x30c/0x4b8 [39482.439947] do_page_fault+0x294/0x658 [39482.443690] do_translation_fault+0x98/0xa8 [39482.447871] do_mem_abort+0x64/0xf0 [39482.451354] el0_da+0x24/0x28 [39482.454476] SMP: stopping secondary CPUs [39482.459038] Kernel Offset: disabled [39482.462522] CPU features: 0x2,21806008 [39482.466264] Memory Limit: none [39482.469435] ---[ end Kernel panic - not syncing: corrupted stack end detected inside scheduler ]--- [39483.029013] WARNING: CPU: 1 PID: 1319 at kernel/sched/core.c:1168 set_task_cpu+0x5ac/0x5f8 [39483.037272] Modules linked in: vfat fat ses enclosure ipmi_ssif ghash_ce sha2_ce sha256_arm64 sha1_ce sg ipmi_si ipmi_devintf ipmi_msghandler sbsa_gwdt sch_fq_codel xfs libcrc32c marvell mpt3sas raid_class mlx5_core hibmc_drm drm_kms_helper syscopyarea sysfillrect sysimgblt fb_sys_fops ttm drm ixgbe hisi_sas_v2_hw igb hisi_sas_main libsas hns_dsaf mlxfw hns_enet_drv devlink i2c_designware_platform mdio i2c_algo_bit scsi_transport_sas ehci_platform i2c_designware_core hns_mdio hnae dm_mirror dm_region_hash dm_log dm_mod [39483.083295] CPU: 1 PID: 1319 Comm: systemd-journal Tainted: G B W L 4.20.0-rc1+ #3 [39483.091812] Hardware name: Huawei TaiShan 2280 /BC11SPCD, BIOS 1.50 06/01/2018 [39483.099027] pstate: 60000085 (nZCv daIf -PAN -UAO) [39483.103812] pc : set_task_cpu+0x5ac/0x5f8 [39483.107815] lr : set_task_cpu+0x124/0x5f8 [39483.111817] sp : ffff8016fb0440c0 [39483.115125] x29: ffff8016fb0440c0 x28: 0000000000000000 [39483.120433] x27: 0000000000000002 x26: 0000000000000004 [39483.125740] x25: ffff20000f6718b8 x24: ffff80161ac85244 [39483.131047] x23: ffff20000f669848 x22: 1ffff002df608826 [39483.136354] x21: 0000000000000002 x20: 0000000000000000 [39483.141661] x19: ffff80161ac85200 x18: ffff1011daf8d930 [39483.146968] x17: 0000000000000000 x16: 0000000000000000 [39483.152274] x15: ffff1011daf8d930 x14: 6863732065646973 [39483.157581] x13: 6e69206465746365 x12: 74656420646e6520 [39483.162887] x11: 00000000f2f2f2f2 x10: dfff200000000000 [39483.168194] x9 : ffff20000f669848 x8 : 00000000f2f2f200 [39483.173501] x7 : 0000000041b58ab3 x6 : 0000000041b58ab3 [39483.178808] x5 : dfff200000000000 x4 : dfff200000000000 [39483.184114] x3 : 00000000f2f2f2f2 x2 : 0000000000000007 [39483.189421] x1 : ffff20000f6718b8 x0 : 0000000000000000 [39483.194728] Call trace: [39483.197170] set_task_cpu+0x5ac/0x5f8 [39483.200826] try_to_wake_up+0x380/0xa48 [39483.204656] wake_up_process+0x28/0x38 [39483.208400] hrtimer_wakeup+0x30/0x40 [39483.212056] __run_hrtimer+0x20c/0x988 [39483.215800] __hrtimer_run_queues+0x16c/0x1f8 [39483.220151] hrtimer_interrupt+0x18c/0x370 [39483.224243] arch_timer_handler_phys+0x44/0x58 [39483.228682] handle_percpu_devid_irq+0x1a0/0x720 [39483.233293] generic_handle_irq+0x44/0x60 [39483.237296] __handle_domain_irq+0x88/0xf0 [39483.241386] gic_handle_irq+0xc0/0x168 [39483.245128] el1_irq+0xb4/0x140 [39483.248265] __delay+0x70/0xd8 [39483.251313] __const_udelay+0x34/0x40 [39483.254969] panic+0x30c/0x31c [39483.258018] schedule+0x0/0x240 [39483.261154] preempt_schedule_common+0x3c/0x78 [39483.265591] _cond_resched+0xfc/0x108 [39483.269249] shrink_node_memcg+0x368/0x9c0 [39483.273339] shrink_node+0x200/0x940 [39483.276909] do_try_to_free_pages+0x234/0x7d0 [39483.281260] try_to_free_pages+0x228/0x6b0 [39483.285351] __alloc_pages_nodemask+0xcbc/0x2028 [39483.289963] alloc_pages_vma+0x1a4/0x208 [39483.293880] __read_swap_cache_async+0x4fc/0x858 [39483.298492] read_swap_cache_async+0xa4/0x100 [39483.302844] swap_cluster_readahead+0x598/0x650 [39483.307368] shmem_swapin+0xd4/0x150 [39483.310938] shmem_getpage_gfp+0xf50/0x1c48 [39483.315115] shmem_fault+0x140/0x340 [39483.318684] __do_fault+0xd0/0x440 [39483.322080] do_fault+0x54c/0xf48 [39483.325390] __handle_mm_fault+0x4c0/0x928 [39483.329480] handle_mm_fault+0x30c/0x4b8 [39483.333397] do_page_fault+0x294/0x658 [39483.337141] do_translation_fault+0x98/0xa8 [39483.341318] do_mem_abort+0x64/0xf0 [39483.344800] el0_da+0x24/0x28 [39483.347761] irq event stamp: 0 [39483.350810] hardirqs last enabled at (0): [<0000000000000000>] (null) [39483.358200] hardirqs last disabled at (0): [<ffff20000811a668>] copy_process.isra.2+0xda0/0x2e20 [39483.366979] softirqs last enabled at (0): [<ffff20000811a668>] copy_process.isra.2+0xda0/0x2e20 [39483.375756] softirqs last disabled at (0): [<0000000000000000>] (null) [39483.383144] ---[ end trace 0d8bbddd3044cabe ]--- ^ permalink raw reply [flat|nested] 7+ messages in thread
* Re: kmemleak: Early log buffer exceeded (525980) during boot 2018-11-10 15:08 ` Qian Cai @ 2018-11-10 16:59 ` Catalin Marinas 2018-11-10 17:42 ` Qian Cai 2018-11-28 4:21 ` Qian Cai 0 siblings, 2 replies; 7+ messages in thread From: Catalin Marinas @ 2018-11-10 16:59 UTC (permalink / raw) To: Qian Cai; +Cc: open list, linux-mm On Sat, Nov 10, 2018 at 10:08:10AM -0500, Qian Cai wrote: > On Nov 8, 2018, at 4:23 PM, Qian Cai <cai@gmx.us> wrote: > > The maximum value for DEBUG_KMEMLEAK_EARLY_LOG_SIZE is only 40000, so it > > disables kmemleak every time on this aarch64 server running the latest mainline > > (b00d209). > > > > # echo scan > /sys/kernel/debug/kmemleak > > -bash: echo: write error: Device or resource busy > > > > Any idea on how to enable kmemleak there? > > I have managed to hard-code DEBUG_KMEMLEAK_EARLY_LOG_SIZE to 600000, That's quite a high number, I wouldn't have thought it is needed. Basically the early log buffer is only used until the slub allocator gets initialised and kmemleak_init() is called from start_kernel(). I don't know what allocates that much memory so early. What else is in your .config? > diff --git a/mm/kmemleak.c b/mm/kmemleak.c > index 877de4fa0720..c10119102c10 100644 > --- a/mm/kmemleak.c > +++ b/mm/kmemleak.c > @@ -280,7 +280,7 @@ struct early_log { > > /* early logging buffer and current position */ > static struct early_log > - early_log[CONFIG_DEBUG_KMEMLEAK_EARLY_LOG_SIZE] __initdata; > + early_log[600000] __initdata; You don't need to patch the kernel, the config variable is there to be changed. > Even though kmemleak is enabled, there are continuous soft-lockups and eventually > a kernel panic. Is it normal that kmemleak not going to work with large systems (this > aarch64 server has 64-CPU and 100G memory)? I only tried 4.20-rc1 with 64 CPUs in a guest under KVM and with only 16GB of RAM (I can try on a ThunderX2 host in about 10 days as I'm away next week at Linux Plumbers). But it works fine for me, no soft lockups. Maybe something different in your .config or something else goes completely wrong (e.g. memory corruption) and kmemleak trips over it. -- Catalin ^ permalink raw reply [flat|nested] 7+ messages in thread
* Re: kmemleak: Early log buffer exceeded (525980) during boot 2018-11-10 16:59 ` Catalin Marinas @ 2018-11-10 17:42 ` Qian Cai 2018-11-14 2:31 ` Qian Cai 2018-11-28 4:21 ` Qian Cai 1 sibling, 1 reply; 7+ messages in thread From: Qian Cai @ 2018-11-10 17:42 UTC (permalink / raw) To: Catalin Marinas; +Cc: open list, linux-mm On 11/10/18 at 11:59 AM, Catalin Marinas wrote: > On Sat, Nov 10, 2018 at 10:08:10AM -0500, Qian Cai wrote: > > On Nov 8, 2018, at 4:23 PM, Qian Cai <cai@gmx.us> wrote: > > > The maximum value for DEBUG_KMEMLEAK_EARLY_LOG_SIZE is only 40000, so it > > > disables kmemleak every time on this aarch64 server running the latest mainline > > > (b00d209). > > > > > > # echo scan > /sys/kernel/debug/kmemleak > > > -bash: echo: write error: Device or resource busy > > > > > > Any idea on how to enable kmemleak there? > > > > I have managed to hard-code DEBUG_KMEMLEAK_EARLY_LOG_SIZE to 600000, > > That's quite a high number, I wouldn't have thought it is needed. > Basically the early log buffer is only used until the slub allocator > gets initialised and kmemleak_init() is called from start_kernel(). I > don't know what allocates that much memory so early. > > What else is in your .config? https://c.gmx.com/@642631272677512867/tqD5eulbQAC-1h-fkVe1Iw Does the dmesg helps? https://paste.ubuntu.com/p/BnhvXXhn7k/ > > > diff --git a/mm/kmemleak.c b/mm/kmemleak.c > > index 877de4fa0720..c10119102c10 100644 > > --- a/mm/kmemleak.c > > +++ b/mm/kmemleak.c > > @@ -280,7 +280,7 @@ struct early_log { > > > > /* early logging buffer and current position */ > > static struct early_log > > - early_log[CONFIG_DEBUG_KMEMLEAK_EARLY_LOG_SIZE] __initdata; > > + early_log[600000] __initdata; > > You don't need to patch the kernel, the config variable is there to be > changed. Right, but the maximum is only 40000 in kconfig, so anything bigger than that will be rejected. ^ permalink raw reply [flat|nested] 7+ messages in thread
* Re: kmemleak: Early log buffer exceeded (525980) during boot 2018-11-10 17:42 ` Qian Cai @ 2018-11-14 2:31 ` Qian Cai 0 siblings, 0 replies; 7+ messages in thread From: Qian Cai @ 2018-11-14 2:31 UTC (permalink / raw) To: Catalin Marinas; +Cc: linux kernel, linux-mm > On Nov 10, 2018, at 12:42 PM, Qian Cai <cai@gmx.us> wrote: > > > On 11/10/18 at 11:59 AM, Catalin Marinas wrote: > >> On Sat, Nov 10, 2018 at 10:08:10AM -0500, Qian Cai wrote: >>> On Nov 8, 2018, at 4:23 PM, Qian Cai <cai@gmx.us> wrote: >>>> The maximum value for DEBUG_KMEMLEAK_EARLY_LOG_SIZE is only 40000, so it >>>> disables kmemleak every time on this aarch64 server running the latest mainline >>>> (b00d209). >>>> >>>> # echo scan > /sys/kernel/debug/kmemleak >>>> -bash: echo: write error: Device or resource busy >>>> >>>> Any idea on how to enable kmemleak there? >>> >>> I have managed to hard-code DEBUG_KMEMLEAK_EARLY_LOG_SIZE to 600000, >> >> That's quite a high number, I wouldn't have thought it is needed. >> Basically the early log buffer is only used until the slub allocator >> gets initialised and kmemleak_init() is called from start_kernel(). I >> don't know what allocates that much memory so early. >> >> What else is in your .config? > https://c.gmx.com/@642631272677512867/tqD5eulbQAC-1h-fkVe1Iw > > Does the dmesg helps? > https://paste.ubuntu.com/p/BnhvXXhn7k/ >> >>> diff --git a/mm/kmemleak.c b/mm/kmemleak.c >>> index 877de4fa0720..c10119102c10 100644 >>> --- a/mm/kmemleak.c >>> +++ b/mm/kmemleak.c >>> @@ -280,7 +280,7 @@ struct early_log { >>> >>> /* early logging buffer and current position */ >>> static struct early_log >>> - early_log[CONFIG_DEBUG_KMEMLEAK_EARLY_LOG_SIZE] __initdata; >>> + early_log[600000] __initdata; >> >> You don't need to patch the kernel, the config variable is there to be >> changed. > Right, but the maximum is only 40000 in kconfig, so anything bigger than that will be rejected. I got soft lockups all over the place by compiling kernel on another aarch64 server with 256-CPU with DEBUG_KMEMLEAK_EARLY_LOG_SIZE=200000 [ 802.897516] watchdog: BUG: soft lockup - CPU#151 stuck for 22s! [kworker/151:1:1410] [ 802.905311] Modules linked in: vfat fat ghash_ce i2c_smbus sha2_ce sha256_arm64 sha1_ce sg ipmi_ssif ipmi_devintf ipmi_msghandler sch_fq_codel xfs libcrc32c sr_mod cdrom ast mlx5_core i2c_algo_bit drm_kms_helper syscopyarea sysfillrect sysimgblt fb_sys_fops ttm drm uas usb_storage mlxfw devlink i2c_xlp9xx gpio_xlp dm_mirror dm_region_hash dm_log dm_mod [ 802.936640] irq event stamp: 2717000 [ 802.940277] hardirqs last enabled at (2716999): [<ffff200008fabd48>] _raw_write_unlock_irqrestore+0x80/0x88 [ 802.950166] hardirqs last disabled at (2717000): [<ffff2000080839b4>] el1_irq+0x74/0x140 [ 802.958405] softirqs last enabled at (84510): [<ffff200008082210>] __do_softirq+0x7c8/0x9c8 [ 802.966914] softirqs last disabled at (84433): [<ffff20000812dbe4>] irq_exit+0x25c/0x2f0 [ 802.975035] CPU: 151 PID: 1410 Comm: kworker/151:1 Kdump: loaded Tainted: G W L 4.20.0-rc2+ #4 [ 802.984800] Hardware name: HPE Apollo 70 /C01_APACHE_MB , BIOS L50_5.13_1.0.6 07/10/2018 [ 802.994692] Workqueue: events free_obj_work [ 802.998918] pstate: 20400009 (nzCv daif +PAN -UAO) [ 803.003755] pc : _raw_write_unlock_irqrestore+0x84/0x88 [ 803.009008] lr : _raw_write_unlock_irqrestore+0x80/0x88 [ 803.014251] sp : ffff8095884a6760 [ 803.017582] x29: ffff8095884a6760 x28: 0000000000000000 [ 803.022916] x27: 0000000000000000 x26: ffff20000c318d80 [ 803.028246] x25: ffff809254772738 x24: ffff20000dbf3be0 [ 803.033581] x23: ffff80925477dc28 x22: dfff200000000000 [ 803.038942] x21: ffff20000851ea9c x20: ffff20000c318d80 [ 803.044352] x19: 0000000000000000 x18: 0000000000000000 [ 803.049700] x17: 0000000000000000 x16: 0000000000000000 [ 803.055064] x15: 0000000000000000 x14: 0000000000000000 [ 803.060408] x13: 0000000000000000 x12: 000000000000005c [ 803.065733] x11: 00000000f2f2f2f2 x10: dfff200000000000 [ 803.071061] x9 : ffff20000c139848 x8 : ffff8095cd9247d8 [ 803.076389] x7 : 0000000041b58ab3 x6 : dfff200000000000 [ 803.081723] x5 : ffff20000954e8b8 x4 : dfff200000000000 [ 803.087064] x3 : 0000000000000001 x2 : 0000000000000007 [ 803.092409] x1 : 086e7d9f6bfbf800 x0 : 0000000000000000 [ 803.097752] Call trace: [ 803.100249] _raw_write_unlock_irqrestore+0x84/0x88 [ 803.105170] create_object+0x4dc/0x600 [ 803.108957] kmemleak_alloc+0xc8/0xd8 [ 803.112646] kmem_cache_alloc+0x3b0/0x3f8 [ 803.116679] __debug_object_init+0x8cc/0x918 [ 803.120978] debug_object_activate+0x218/0x370 [ 803.125439] __call_rcu+0xdc/0xad0 [ 803.128856] call_rcu+0x30/0x40 [ 803.132019] put_object+0x50/0x68 [ 803.135348] __delete_object+0xfc/0x140 [ 803.139200] delete_object_full+0x2c/0x38 [ 803.143235] kmemleak_free+0xa4/0xb0 [ 803.146825] kmem_cache_free+0x2e4/0x3a8 [ 803.150762] free_obj_work+0x300/0x468 [ 803.154529] process_one_work+0x60c/0xd90 [ 803.158575] worker_thread+0x13c/0xa70 [ 803.162365] kthread+0x1c4/0x1d0 [ 803.165618] ret_from_fork+0x10/0x1c ^ permalink raw reply [flat|nested] 7+ messages in thread
* Re: kmemleak: Early log buffer exceeded (525980) during boot 2018-11-10 16:59 ` Catalin Marinas 2018-11-10 17:42 ` Qian Cai @ 2018-11-28 4:21 ` Qian Cai 2018-12-05 14:38 ` Dmitry Vyukov 1 sibling, 1 reply; 7+ messages in thread From: Qian Cai @ 2018-11-28 4:21 UTC (permalink / raw) To: Catalin Marinas Cc: linux-kernel, linux-mm, kasan-dev, Andrey Ryabinin, Alexander Potapenko, Dmitry Vyukov, Will Deacon, linux-arm-kernel On 11/10/18 11:59 AM, Catalin Marinas wrote: > On Sat, Nov 10, 2018 at 10:08:10AM -0500, Qian Cai wrote: >> On Nov 8, 2018, at 4:23 PM, Qian Cai <cai@gmx.us> wrote: >>> The maximum value for DEBUG_KMEMLEAK_EARLY_LOG_SIZE is only 40000, so it >>> disables kmemleak every time on this aarch64 server running the latest mainline >>> (b00d209). >>> >>> # echo scan > /sys/kernel/debug/kmemleak >>> -bash: echo: write error: Device or resource busy >>> >>> Any idea on how to enable kmemleak there? >> >> I have managed to hard-code DEBUG_KMEMLEAK_EARLY_LOG_SIZE to 600000, > > That's quite a high number, I wouldn't have thought it is needed. > Basically the early log buffer is only used until the slub allocator > gets initialised and kmemleak_init() is called from start_kernel(). I > don't know what allocates that much memory so early. > It turned out that kmemleak does not play well with KASAN on those aarch64 (HPE Apollo 70 and Huawei TaiShan 2280) servers. After calling start_kernel()->setup_arch()->kasan_init(), kmemleak early log buffer went from something like from 280 to 260000. The multitude of kmemleak_alloc() calls is, for_each_memblock(memory, reg) x \ while (pgdp++, addr = next, addr != end) x \ while (ptep++, addr = next, addr != end && \ pte_none(READ_ONCE(*ptep))) Is this expected? ^ permalink raw reply [flat|nested] 7+ messages in thread
* Re: kmemleak: Early log buffer exceeded (525980) during boot 2018-11-28 4:21 ` Qian Cai @ 2018-12-05 14:38 ` Dmitry Vyukov 0 siblings, 0 replies; 7+ messages in thread From: Dmitry Vyukov @ 2018-12-05 14:38 UTC (permalink / raw) To: cai Cc: Catalin Marinas, LKML, Linux-MM, kasan-dev, Andrey Ryabinin, Alexander Potapenko, Will Deacon, Linux ARM On Wed, Nov 28, 2018 at 5:21 AM Qian Cai <cai@gmx.us> wrote: > On 11/10/18 11:59 AM, Catalin Marinas wrote: > > On Sat, Nov 10, 2018 at 10:08:10AM -0500, Qian Cai wrote: > >> On Nov 8, 2018, at 4:23 PM, Qian Cai <cai@gmx.us> wrote: > >>> The maximum value for DEBUG_KMEMLEAK_EARLY_LOG_SIZE is only 40000, so it > >>> disables kmemleak every time on this aarch64 server running the latest mainline > >>> (b00d209). > >>> > >>> # echo scan > /sys/kernel/debug/kmemleak > >>> -bash: echo: write error: Device or resource busy > >>> > >>> Any idea on how to enable kmemleak there? > >> > >> I have managed to hard-code DEBUG_KMEMLEAK_EARLY_LOG_SIZE to 600000, > > > > That's quite a high number, I wouldn't have thought it is needed. > > Basically the early log buffer is only used until the slub allocator > > gets initialised and kmemleak_init() is called from start_kernel(). I > > don't know what allocates that much memory so early. > > > > It turned out that kmemleak does not play well with KASAN on those aarch64 (HPE > Apollo 70 and Huawei TaiShan 2280) servers. > > After calling start_kernel()->setup_arch()->kasan_init(), kmemleak early log > buffer went from something like from 280 to 260000. The multitude of > kmemleak_alloc() calls is, > > for_each_memblock(memory, reg) x \ > while (pgdp++, addr = next, addr != end) x \ > while (ptep++, addr = next, addr != end && \ pte_none(READ_ONCE(*ptep))) > > Is this expected? FTR, this should be resolved by (if put pieces together correctly): https://lkml.org/lkml/2018/11/29/191 ^ permalink raw reply [flat|nested] 7+ messages in thread
end of thread, other threads:[~2018-12-05 14:39 UTC | newest] Thread overview: 7+ messages (download: mbox.gz / follow: Atom feed) -- links below jump to the message on this page -- 2018-11-08 21:23 kmemleak: Early log buffer exceeded (525980) during boot Qian Cai 2018-11-10 15:08 ` Qian Cai 2018-11-10 16:59 ` Catalin Marinas 2018-11-10 17:42 ` Qian Cai 2018-11-14 2:31 ` Qian Cai 2018-11-28 4:21 ` Qian Cai 2018-12-05 14:38 ` Dmitry Vyukov
This is a public inbox, see mirroring instructions for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®