mirror of https://lore.kernel.org/lkml/
 help / color / mirror / Atom feed
* [RESEND PATCH v5 5/7] mtd: m25p80: add support of octal mode I/O transfer
@ 2018-12-10  4:10 Yogesh Narayan Gaur
  0 siblings, 0 replies; only message in thread
From: Yogesh Narayan Gaur @ 2018-12-10  4:10 UTC (permalink / raw)
  To: linux-mtd, boris.brezillon, broonie, marek.vasut, vigneshr,
	linux-spi, devicetree
  Cc: robh, mark.rutland, shawnguo, linux-arm-kernel,
	computersforpeace, frieder.schrempf, linux-kernel,
	Yogesh Narayan Gaur

Add support for octal mode I/O data transfer based on the controller (spi)
mode.
Assign hw-capability mask bits for octal transfer.

Signed-off-by: Yogesh Gaur <yogeshnarayan.gaur@nxp.com>
---
Changes for v5:
- Modified string 'octo' with 'octal'.
Changes for v4:
- None
Changes for v3:
- Modified string 'octal' with 'octo'.
Changes for v2:
- Incorporated review comments of Boris.

 drivers/mtd/devices/m25p80.c | 9 ++++++++-
 1 file changed, 8 insertions(+), 1 deletion(-)

diff --git a/drivers/mtd/devices/m25p80.c b/drivers/mtd/devices/m25p80.c
index c4a1d04..651bab6 100644
--- a/drivers/mtd/devices/m25p80.c
+++ b/drivers/mtd/devices/m25p80.c
@@ -195,7 +195,14 @@ static int m25p_probe(struct spi_mem *spimem)
 	spi_mem_set_drvdata(spimem, flash);
 	flash->spimem = spimem;
 
-	if (spi->mode & SPI_RX_QUAD) {
+	if (spi->mode & SPI_RX_OCTAL) {
+		hwcaps.mask |= SNOR_HWCAPS_READ_1_1_8;
+
+		if (spi->mode & SPI_TX_OCTAL)
+			hwcaps.mask |= (SNOR_HWCAPS_READ_1_8_8 |
+					SNOR_HWCAPS_PP_1_1_8 |
+					SNOR_HWCAPS_PP_1_8_8);
+	} else if (spi->mode & SPI_RX_QUAD) {
 		hwcaps.mask |= SNOR_HWCAPS_READ_1_1_4;
 
 		if (spi->mode & SPI_TX_QUAD)
-- 
2.7.4


^ permalink raw reply	[flat|nested] only message in thread

only message in thread, other threads:[~2018-12-10  4:10 UTC | newest]

Thread overview: (only message) (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2018-12-10  4:10 [RESEND PATCH v5 5/7] mtd: m25p80: add support of octal mode I/O transfer Yogesh Narayan Gaur

This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox

all inboxes | Powered by JetHome®