mirror of https://lore.kernel.org/lkml/
 help / color / mirror / Atom feed
From: Mario Limonciello <mario.limonciello@dell.com>
To: David Miller <davem@davemloft.net>
Cc: LKML <linux-kernel@vger.kernel.org>,
	Netdev <netdev@vger.kernel.org>,
	Linux USB <linux-usb@vger.kernel.org>,
	anthony.wong@canonical.com,
	Mario Limonciello <mario.limonciello@dell.com>
Subject: [PATCH] r8152: Add support for MAC address pass through on RTL8153-BND
Date: Tue, 11 Dec 2018 08:16:14 -0600	[thread overview]
Message-ID: <1544537774-4370-1-git-send-email-mario.limonciello@dell.com> (raw)

All previous docks and dongles that have supported this feature use
the RTL8153-AD chip.

RTL8153-BND is a new chip that will be used in upcoming Dell type-C docks.
It should be added to the whitelist of devices to activate MAC address
pass through.

Per confirming with Realtek all devices containing RTL8153-BND should
activate MAC pass through and there won't use pass through bit on efuse
like in RTL8153-AD.

Signed-off-by: Mario Limonciello <mario.limonciello@dell.com>
---
 drivers/net/usb/r8152.c | 33 ++++++++++++++++++++++-----------
 1 file changed, 22 insertions(+), 11 deletions(-)

diff --git a/drivers/net/usb/r8152.c b/drivers/net/usb/r8152.c
index f1b5201..60dd1ec 100644
--- a/drivers/net/usb/r8152.c
+++ b/drivers/net/usb/r8152.c
@@ -129,6 +129,7 @@
 #define USB_UPS_CTRL		0xd800
 #define USB_POWER_CUT		0xd80a
 #define USB_MISC_0		0xd81a
+#define USB_MISC_1		0xd81f
 #define USB_AFE_CTRL2		0xd824
 #define USB_UPS_CFG		0xd842
 #define USB_UPS_FLAGS		0xd848
@@ -555,6 +556,7 @@ enum spd_duplex {
 
 /* MAC PASSTHRU */
 #define AD_MASK			0xfee0
+#define BND_MASK		0x0004
 #define EFUSE			0xcfdb
 #define PASS_THRU_MASK		0x1
 
@@ -1150,7 +1152,7 @@ static int rtl8152_set_mac_address(struct net_device *netdev, void *p)
 	return ret;
 }
 
-/* Devices containing RTL8153-AD can support a persistent
+/* Devices containing proper chips can support a persistent
  * host system provided MAC address.
  * Examples of this are Dell TB15 and Dell WD15 docks
  */
@@ -1165,13 +1167,23 @@ static int vendor_mac_passthru_addr_read(struct r8152 *tp, struct sockaddr *sa)
 
 	/* test for -AD variant of RTL8153 */
 	ocp_data = ocp_read_word(tp, MCU_TYPE_USB, USB_MISC_0);
-	if ((ocp_data & AD_MASK) != 0x1000)
-		return -ENODEV;
-
-	/* test for MAC address pass-through bit */
-	ocp_data = ocp_read_byte(tp, MCU_TYPE_USB, EFUSE);
-	if ((ocp_data & PASS_THRU_MASK) != 1)
-		return -ENODEV;
+	if ((ocp_data & AD_MASK) == 0x1000) {
+		/* test for MAC address pass-through bit */
+		ocp_data = ocp_read_byte(tp, MCU_TYPE_USB, EFUSE);
+		if ((ocp_data & PASS_THRU_MASK) != 1) {
+			netif_dbg(tp, probe, tp->netdev,
+				  "No efuse for RTL8153-AD MAC pass through\n");
+			return -ENODEV;
+		}
+	} else {
+		/* test for RTL8153-BND */
+		ocp_data = ocp_read_byte(tp, MCU_TYPE_USB, USB_MISC_1);
+		if ((ocp_data & BND_MASK) == 0) {
+			netif_dbg(tp, probe, tp->netdev,
+				  "Invalid variant for MAC pass through\n");
+			return -ENODEV;
+		}
+	}
 
 	/* returns _AUXMAC_#AABBCCDDEEFF# */
 	status = acpi_evaluate_object(NULL, "\\_SB.AMAC", NULL, &buffer);
@@ -1217,9 +1229,8 @@ static int set_ethernet_addr(struct r8152 *tp)
 	if (tp->version == RTL_VER_01) {
 		ret = pla_ocp_read(tp, PLA_IDR, 8, sa.sa_data);
 	} else {
-		/* if this is not an RTL8153-AD, no eFuse mac pass thru set,
-		 * or system doesn't provide valid _SB.AMAC this will be
-		 * be expected to non-zero
+		/* if device doesn't support MAC pass through this will
+		 * be expected to be non-zero
 		 */
 		ret = vendor_mac_passthru_addr_read(tp, &sa);
 		if (ret < 0)
-- 
2.7.4


             reply	other threads:[~2018-12-11 14:16 UTC|newest]

Thread overview: 3+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2018-12-11 14:16 Mario Limonciello [this message]
2018-12-14 13:04 ` Perry Yuan
2018-12-14 22:38 ` [PATCH] " David Miller

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1544537774-4370-1-git-send-email-mario.limonciello@dell.com \
    --to=mario.limonciello@dell.com \
    --cc=anthony.wong@canonical.com \
    --cc=davem@davemloft.net \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-usb@vger.kernel.org \
    --cc=netdev@vger.kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox

all inboxes | Powered by JetHome®