mirror of https://lore.kernel.org/lkml/
 help / color / mirror / Atom feed
From: Perry Yuan <pyuan@redhat.com>
To: Mario Limonciello <mario.limonciello@dell.com>,
	David Miller <davem@davemloft.net>
Cc: LKML <linux-kernel@vger.kernel.org>,
	Netdev <netdev@vger.kernel.org>,
	Linux USB <linux-usb@vger.kernel.org>,
	anthony.wong@canonical.com
Subject: Re: r8152: Add support for MAC address pass through on RTL8153-BND
Date: Fri, 14 Dec 2018 21:04:07 +0800	[thread overview]
Message-ID: <a7efd0ef-8729-4257-9059-3c06d4828e7e@redhat.com> (raw)
In-Reply-To: <1544537774-4370-1-git-send-email-mario.limonciello@dell.com>

On 12/11/18 10:16 PM, Mario Limonciello wrote:
> All previous docks and dongles that have supported this feature use
> the RTL8153-AD chip.
>
> RTL8153-BND is a new chip that will be used in upcoming Dell type-C docks.
> It should be added to the whitelist of devices to activate MAC address
> pass through.
>
> Per confirming with Realtek all devices containing RTL8153-BND should
> activate MAC pass through and there won't use pass through bit on efuse
> like in RTL8153-AD.
>
> Signed-off-by: Mario Limonciello <mario.limonciello@dell.com>
> ---
>   drivers/net/usb/r8152.c | 33 ++++++++++++++++++++++-----------
>   1 file changed, 22 insertions(+), 11 deletions(-)
>
> diff --git a/drivers/net/usb/r8152.c b/drivers/net/usb/r8152.c
> index f1b5201..60dd1ec 100644
> --- a/drivers/net/usb/r8152.c
> +++ b/drivers/net/usb/r8152.c
> @@ -129,6 +129,7 @@
>   #define USB_UPS_CTRL		0xd800
>   #define USB_POWER_CUT		0xd80a
>   #define USB_MISC_0		0xd81a
> +#define USB_MISC_1		0xd81f
>   #define USB_AFE_CTRL2		0xd824
>   #define USB_UPS_CFG		0xd842
>   #define USB_UPS_FLAGS		0xd848
> @@ -555,6 +556,7 @@ enum spd_duplex {
>   
>   /* MAC PASSTHRU */
>   #define AD_MASK			0xfee0
> +#define BND_MASK		0x0004
>   #define EFUSE			0xcfdb
>   #define PASS_THRU_MASK		0x1
>   
> @@ -1150,7 +1152,7 @@ static int rtl8152_set_mac_address(struct net_device *netdev, void *p)
>   	return ret;
>   }
>   
> -/* Devices containing RTL8153-AD can support a persistent
> +/* Devices containing proper chips can support a persistent
>    * host system provided MAC address.
>    * Examples of this are Dell TB15 and Dell WD15 docks
>    */
> @@ -1165,13 +1167,23 @@ static int vendor_mac_passthru_addr_read(struct r8152 *tp, struct sockaddr *sa)
>   
>   	/* test for -AD variant of RTL8153 */
>   	ocp_data = ocp_read_word(tp, MCU_TYPE_USB, USB_MISC_0);
> -	if ((ocp_data & AD_MASK) != 0x1000)
> -		return -ENODEV;
> -
> -	/* test for MAC address pass-through bit */
> -	ocp_data = ocp_read_byte(tp, MCU_TYPE_USB, EFUSE);
> -	if ((ocp_data & PASS_THRU_MASK) != 1)
> -		return -ENODEV;
> +	if ((ocp_data & AD_MASK) == 0x1000) {
> +		/* test for MAC address pass-through bit */
> +		ocp_data = ocp_read_byte(tp, MCU_TYPE_USB, EFUSE);
> +		if ((ocp_data & PASS_THRU_MASK) != 1) {
> +			netif_dbg(tp, probe, tp->netdev,
> +				  "No efuse for RTL8153-AD MAC pass through\n");
> +			return -ENODEV;
> +		}
> +	} else {
> +		/* test for RTL8153-BND */
> +		ocp_data = ocp_read_byte(tp, MCU_TYPE_USB, USB_MISC_1);
> +		if ((ocp_data & BND_MASK) == 0) {
> +			netif_dbg(tp, probe, tp->netdev,
> +				  "Invalid variant for MAC pass through\n");
> +			return -ENODEV;
> +		}
> +	}
>   
>   	/* returns _AUXMAC_#AABBCCDDEEFF# */
>   	status = acpi_evaluate_object(NULL, "\\_SB.AMAC", NULL, &buffer);
> @@ -1217,9 +1229,8 @@ static int set_ethernet_addr(struct r8152 *tp)
>   	if (tp->version == RTL_VER_01) {
>   		ret = pla_ocp_read(tp, PLA_IDR, 8, sa.sa_data);
>   	} else {
> -		/* if this is not an RTL8153-AD, no eFuse mac pass thru set,
> -		 * or system doesn't provide valid _SB.AMAC this will be
> -		 * be expected to non-zero
> +		/* if device doesn't support MAC pass through this will
> +		 * be expected to be non-zero
>   		 */
>   		ret = vendor_mac_passthru_addr_read(tp, &sa);
>   		if (ret < 0)

Tested-by : Perry Yuan <pyuan@redhat.com>


  reply	other threads:[~2018-12-14 13:04 UTC|newest]

Thread overview: 3+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2018-12-11 14:16 [PATCH] " Mario Limonciello
2018-12-14 13:04 ` Perry Yuan [this message]
2018-12-14 22:38 ` David Miller

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=a7efd0ef-8729-4257-9059-3c06d4828e7e@redhat.com \
    --to=pyuan@redhat.com \
    --cc=anthony.wong@canonical.com \
    --cc=davem@davemloft.net \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-usb@vger.kernel.org \
    --cc=mario.limonciello@dell.com \
    --cc=netdev@vger.kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox

all inboxes | Powered by JetHome®