mirror of https://lore.kernel.org/lkml/
 help / color / mirror / Atom feed
* [PATCH v2] regulator: mcp16502: add support for suspend
@ 2018-12-14  8:09 Andrei.Stefanescu
  0 siblings, 0 replies; only message in thread
From: Andrei.Stefanescu @ 2018-12-14  8:09 UTC (permalink / raw)
  To: broonie, lgirdwood
  Cc: linux-arm-kernel, linux-kernel, Cristian.Birsan, Nicolas.Ferre,
	Andrei.Stefanescu

This patch adds support for entering/resuming suspend states.
It does this by setting the LPM pin of the PMIC.

When suspending the PMIC will enter the Low-power mode
when the LPM pin will be set to high. If the suspend target state
is suspend-to-mem, the PMIC will transition to Hibernate mode,
otherwise, if it is standby, it will remain in Low-power mode.

Signed-off-by: Andrei Stefanescu <andrei.stefanescu@microchip.com>
---
 drivers/regulator/mcp16502.c | 34 ++++++++++++++++++++++++++++++++++
 1 file changed, 34 insertions(+)

diff --git a/drivers/regulator/mcp16502.c b/drivers/regulator/mcp16502.c
index 7cbc96f..25d7b43 100644
--- a/drivers/regulator/mcp16502.c
+++ b/drivers/regulator/mcp16502.c
@@ -497,6 +497,37 @@ static int mcp16502_probe(struct i2c_client *client,
 	return 0;
 }
 
+#ifdef CONFIG_SUSPEND
+static int mcp16502_suspend_noirq(struct device *dev)
+{
+	struct i2c_client *client = to_i2c_client(dev);
+	struct mcp16502 *mcp = i2c_get_clientdata(client);
+
+	mcp16502_gpio_set_mode(mcp, MCP16502_OPMODE_LPM);
+
+	return 0;
+}
+
+static int mcp16502_resume_noirq(struct device *dev)
+{
+	struct i2c_client *client = to_i2c_client(dev);
+	struct mcp16502 *mcp = i2c_get_clientdata(client);
+
+	mcp16502_gpio_set_mode(mcp, MCP16502_OPMODE_ACTIVE);
+
+	return 0;
+}
+#else /* !CONFIG_SUSPEND */
+#define mcp16502_suspend NULL
+#define mcp16502_resume NULL
+#endif /* !CONFIG_SUSPEND */
+
+#ifdef CONFIG_PM
+static const struct dev_pm_ops mcp16502_pm_ops = {
+	SET_NOIRQ_SYSTEM_SLEEP_PM_OPS(mcp16502_suspend_noirq,
+				     mcp16502_resume_noirq)
+};
+#endif
 static const struct i2c_device_id mcp16502_i2c_id[] = {
 	{ "mcp16502", 0 },
 	{ }
@@ -508,6 +539,9 @@ static struct i2c_driver mcp16502_drv = {
 	.driver		= {
 		.name	= "mcp16502-regulator",
 		.of_match_table	= of_match_ptr(mcp16502_ids),
+#ifdef CONFIG_PM
+		.pm = &mcp16502_pm_ops,
+#endif
 	},
 	.id_table	= mcp16502_i2c_id,
 };
-- 
2.7.4


^ permalink raw reply	[flat|nested] only message in thread

only message in thread, other threads:[~2018-12-14  8:09 UTC | newest]

Thread overview: (only message) (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2018-12-14  8:09 [PATCH v2] regulator: mcp16502: add support for suspend Andrei.Stefanescu

This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox

all inboxes | Powered by JetHome®