mirror of https://lore.kernel.org/lkml/
 help / color / mirror / Atom feed
* [PATCH V2] DMA Block size configuration prior to CQE
@ 2018-12-19 20:33 Sowjanya Komatineni
  2018-12-19 20:33 ` [PATCH V2] mmc: cqhci: DMA Configuration " Sowjanya Komatineni
  0 siblings, 1 reply; 2+ messages in thread
From: Sowjanya Komatineni @ 2018-12-19 20:33 UTC (permalink / raw)
  To: adrian.hunter, ulf.hansson
  Cc: thierry.reding, jonathanh, linux-tegra, linux-kernel, linux-mmc,
	Sowjanya Komatineni

As per eMMC5.1 Spec Section 6.6.39.1, DMA Block size should be to 512 B
before enabling command queue.

Tegra SDHCI Host design strictly follows this sequence preventing write
access to SDHCI_BLOCK_SIZE when CQE is set in CQHCI_CFG. Writing to
SDHCI_BLOCK_SIZE register when CQE is enabled results in crash.

This patch is needed for enabling HW Command queue for Tegra SDHCI.

Note: couple more patches are needed for enabling HW CMDQ on Tegra SDHCI.
Based on patch review feedback from Ulf on the other HW Command queue
patch, I will resend new patch series with all these dependency patches
together along with covering letter.

[0] DMA Config prior to CQE
    https://lkml.org/lkml/2018/12/14/1062
[1] SDMMC address range
    https://lkml.org/lkml/2018/12/14/1323
[2] Fix sdhci_do_enable_v4_mode
    https://lkml.org/lkml/2018/12/14/72
[3] Add HW Command Queue for Tegra SDHCI
    https://patchwork.kernel.org/patch/10731915/

Sowjanya Komatineni (1):
  mmc: cqhci: DMA Configuration prior to CQE

 drivers/mmc/host/cqhci.c | 18 +++++++++++++++---
 1 file changed, 15 insertions(+), 3 deletions(-)

-- 
2.7.4


^ permalink raw reply	[flat|nested] 2+ messages in thread

end of thread, other threads:[~2018-12-19 20:37 UTC | newest]

Thread overview: 2+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2018-12-19 20:33 [PATCH V2] DMA Block size configuration prior to CQE Sowjanya Komatineni
2018-12-19 20:33 ` [PATCH V2] mmc: cqhci: DMA Configuration " Sowjanya Komatineni

This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox

all inboxes | Powered by JetHome®