From: John Stultz <john.stultz@linaro.org>
To: lkml <linux-kernel@vger.kernel.org>
Cc: Youlin Wang <wwx575822@notesmail.huawei.com>,
Dan Williams <dan.j.williams@intel.com>,
Vinod Koul <vkoul@kernel.org>,
Zhuangluan Su <suzhuangluan@hisilicon.com>,
Ryan Grachek <ryan@edited.us>,
Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>,
dmaengine@vger.kernel.org, Tanglei Han <hantanglei@huawei.com>,
John Stultz <john.stultz@linaro.org>
Subject: [PATCH 3/8 v2] dma: k3dma: Upgrade k3dma driver to support hisi_asp_dma hardware
Date: Fri, 4 Jan 2019 12:56:23 -0800 [thread overview]
Message-ID: <1546635388-13795-4-git-send-email-john.stultz@linaro.org> (raw)
In-Reply-To: <1546635388-13795-1-git-send-email-john.stultz@linaro.org>
From: Youlin Wang <wwx575822@notesmail.huawei.com>
There is an new "hisi-pcm-asp-dma-1.0" device added in
"arch/arm64/boot/dts/hisilicon/hi3660.dtsi".
So we have to add a matching id in the driver file:
.compatible = "hisilicon,hisi-pcm-asp-dma-1.0"
And also hisi-pcm-asp dma device needs no setting to the clock.
So we skip this by adding and using soc data flags.
After above this driver will support both k3 and hisi_asp dma hardware.
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: Vinod Koul <vkoul@kernel.org>
Cc: Zhuangluan Su <suzhuangluan@hisilicon.com>
Cc: Ryan Grachek <ryan@edited.us>
Cc: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Cc: dmaengine@vger.kernel.org
Signed-off-by: Youlin Wang <wwx575822@notesmail.huawei.com>
Signed-off-by: Tanglei Han <hantanglei@huawei.com>
[jstultz: Reworked to use of_match_data]
Signed-off-by: John Stultz <john.stultz@linaro.org>
---
v2:
* Reworked to use of_match_data
---
drivers/dma/k3dma.c | 37 ++++++++++++++++++++++++++++++++-----
1 file changed, 32 insertions(+), 5 deletions(-)
diff --git a/drivers/dma/k3dma.c b/drivers/dma/k3dma.c
index fdec2b6..df61406 100644
--- a/drivers/dma/k3dma.c
+++ b/drivers/dma/k3dma.c
@@ -116,6 +116,13 @@ struct k3_dma_dev {
unsigned int irq;
};
+
+#define K3_FLAG_NOCLK (1<<0)
+struct k3dma_soc_data {
+ unsigned long flags;
+};
+
+
#define to_k3_dma(dmadev) container_of(dmadev, struct k3_dma_dev, slave)
static int k3_dma_config_write(struct dma_chan *chan,
@@ -790,8 +797,21 @@ static int k3_dma_transfer_resume(struct dma_chan *chan)
return 0;
}
+static const struct k3dma_soc_data k3_v1_dma_data = {
+ .flags = 0,
+};
+
+static const struct k3dma_soc_data asp_v1_dma_data = {
+ .flags = K3_FLAG_NOCLK,
+};
+
static const struct of_device_id k3_pdma_dt_ids[] = {
- { .compatible = "hisilicon,k3-dma-1.0", },
+ { .compatible = "hisilicon,k3-dma-1.0",
+ .data = &k3_v1_dma_data
+ },
+ { .compatible = "hisilicon,hisi-pcm-asp-dma-1.0",
+ .data = &asp_v1_dma_data
+ },
{}
};
MODULE_DEVICE_TABLE(of, k3_pdma_dt_ids);
@@ -810,6 +830,7 @@ static struct dma_chan *k3_of_dma_simple_xlate(struct of_phandle_args *dma_spec,
static int k3_dma_probe(struct platform_device *op)
{
+ const struct k3dma_soc_data *soc_data;
struct k3_dma_dev *d;
const struct of_device_id *of_id;
struct resource *iores;
@@ -823,6 +844,10 @@ static int k3_dma_probe(struct platform_device *op)
if (!d)
return -ENOMEM;
+ soc_data = device_get_match_data(&op->dev);
+ if (!soc_data)
+ return -EINVAL;
+
d->base = devm_ioremap_resource(&op->dev, iores);
if (IS_ERR(d->base))
return PTR_ERR(d->base);
@@ -835,10 +860,12 @@ static int k3_dma_probe(struct platform_device *op)
"dma-requests", &d->dma_requests);
}
- d->clk = devm_clk_get(&op->dev, NULL);
- if (IS_ERR(d->clk)) {
- dev_err(&op->dev, "no dma clk\n");
- return PTR_ERR(d->clk);
+ if (!(soc_data->flags & K3_FLAG_NOCLK)) {
+ d->clk = devm_clk_get(&op->dev, NULL);
+ if (IS_ERR(d->clk)) {
+ dev_err(&op->dev, "no dma clk\n");
+ return PTR_ERR(d->clk);
+ }
}
irq = platform_get_irq(op, 0);
--
2.7.4
next prev parent reply other threads:[~2019-01-04 20:57 UTC|newest]
Thread overview: 28+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-01-04 20:56 [PATCH 0/8 v2] k3dma patches to add support for hi3660/HiKey960 John Stultz
2019-01-04 20:56 ` [PATCH 1/8 v2] Documentation: bindings: k3dma: Extend the k3dma driver binding to support hisi-asp John Stultz
2019-01-04 20:56 ` [PATCH 2/8 v2] Documentation: bindings: k3dma: Add binding for dma-avail-chan John Stultz
2019-01-05 4:00 ` Manivannan Sadhasivam
2019-01-05 4:39 ` John Stultz
2019-01-05 4:53 ` Manivannan Sadhasivam
2019-01-05 4:58 ` John Stultz
2019-01-05 13:46 ` Vinod Koul
2019-01-05 14:08 ` Manivannan Sadhasivam
2019-01-07 6:24 ` Vinod Koul
2019-01-04 20:56 ` John Stultz [this message]
2019-01-05 3:41 ` [PATCH 3/8 v2] dma: k3dma: Upgrade k3dma driver to support hisi_asp_dma hardware Manivannan Sadhasivam
2019-01-05 5:22 ` John Stultz
2019-01-05 5:39 ` Manivannan Sadhasivam
2019-01-05 5:44 ` John Stultz
2019-01-05 5:48 ` Manivannan Sadhasivam
2019-01-04 20:56 ` [PATCH 4/8 v2] dma: k3dma: Delete axi_config John Stultz
2019-01-05 3:44 ` Manivannan Sadhasivam
2019-01-04 20:56 ` [PATCH 5/8 v2] dma: k3dma: Add support to dma_avail_chan John Stultz
2019-01-04 20:56 ` [PATCH 6/8 v2] arm64: dts: hi3660: Add dma to uart nodes John Stultz
2019-01-05 3:49 ` Manivannan Sadhasivam
2019-01-05 4:34 ` John Stultz
2019-01-05 5:37 ` John Stultz
2019-01-04 20:56 ` [PATCH 7/8 v2] arm64: dts: hi3660: Add hisi asp dma device John Stultz
2019-01-05 3:50 ` Manivannan Sadhasivam
2019-01-04 20:56 ` [PATCH 8/8 v2] arm64: dts: hi3660: Fixup unofficial dma-min-chan to dma-avail-chan John Stultz
2019-01-05 3:37 ` [PATCH 0/8 v2] k3dma patches to add support for hi3660/HiKey960 Manivannan Sadhasivam
2019-01-05 4:28 ` John Stultz
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1546635388-13795-4-git-send-email-john.stultz@linaro.org \
--to=john.stultz@linaro.org \
--cc=dan.j.williams@intel.com \
--cc=dmaengine@vger.kernel.org \
--cc=hantanglei@huawei.com \
--cc=linux-kernel@vger.kernel.org \
--cc=manivannan.sadhasivam@linaro.org \
--cc=ryan@edited.us \
--cc=suzhuangluan@hisilicon.com \
--cc=vkoul@kernel.org \
--cc=wwx575822@notesmail.huawei.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®