From: Julien Thierry <julien.thierry@arm.com>
To: linux-arm-kernel@lists.infradead.org
Cc: linux-kernel@vger.kernel.org, daniel.thompson@linaro.org,
joel@joelfernandes.org, marc.zyngier@arm.com,
christoffer.dall@arm.com, james.morse@arm.com,
catalin.marinas@arm.com, will.deacon@arm.com,
mark.rutland@arm.com, Julien Thierry <julien.thierry@arm.com>
Subject: [PATCH v8 11/26] efi: Let architectures decide the flags that should be saved/restored
Date: Tue, 8 Jan 2019 14:07:29 +0000 [thread overview]
Message-ID: <1546956464-48825-12-git-send-email-julien.thierry@arm.com> (raw)
In-Reply-To: <1546956464-48825-1-git-send-email-julien.thierry@arm.com>
Currently, irqflags are saved before calling runtime services and
checked for mismatch on return.
Provide a pair of overridable macros to save and restore (if needed) the
state that need to be preserved on return from a runtime service.
This allows to check for flags that are not necesarly related to
irqflags.
Signed-off-by: Julien Thierry <julien.thierry@arm.com>
---
drivers/firmware/efi/runtime-wrappers.c | 17 +++++++++++++++--
include/linux/efi.h | 5 +++--
2 files changed, 18 insertions(+), 4 deletions(-)
diff --git a/drivers/firmware/efi/runtime-wrappers.c b/drivers/firmware/efi/runtime-wrappers.c
index 8903b9c..2f4b68b 100644
--- a/drivers/firmware/efi/runtime-wrappers.c
+++ b/drivers/firmware/efi/runtime-wrappers.c
@@ -89,11 +89,24 @@
efi_rts_work.status; \
})
+#ifndef arch_efi_save_flags
+#define arch_efi_save_flags(state_flags) local_save_flags(state_flags)
+#define arch_efi_restore_flags(state_flags) local_irq_restore(state_flags)
+#endif
+
+inline unsigned long efi_call_virt_save_flags(void)
+{
+ unsigned long flags;
+
+ arch_efi_save_flags(flags);
+ return flags;
+}
+
void efi_call_virt_check_flags(unsigned long flags, const char *call)
{
unsigned long cur_flags, mismatch;
- local_save_flags(cur_flags);
+ cur_flags = efi_call_virt_save_flags();
mismatch = flags ^ cur_flags;
if (!WARN_ON_ONCE(mismatch & ARCH_EFI_IRQ_FLAGS_MASK))
@@ -102,7 +115,7 @@ void efi_call_virt_check_flags(unsigned long flags, const char *call)
add_taint(TAINT_FIRMWARE_WORKAROUND, LOCKDEP_NOW_UNRELIABLE);
pr_err_ratelimited(FW_BUG "IRQ flags corrupted (0x%08lx=>0x%08lx) by EFI %s\n",
flags, cur_flags, call);
- local_irq_restore(flags);
+ arch_efi_restore_flags(flags);
}
/*
diff --git a/include/linux/efi.h b/include/linux/efi.h
index 45ff763..bd80b7e 100644
--- a/include/linux/efi.h
+++ b/include/linux/efi.h
@@ -1607,6 +1607,7 @@ efi_status_t efi_setup_gop(efi_system_table_t *sys_table_arg,
bool efi_runtime_disabled(void);
extern void efi_call_virt_check_flags(unsigned long flags, const char *call);
+extern unsigned long efi_call_virt_save_flags(void);
enum efi_secureboot_mode {
efi_secureboot_mode_unset,
@@ -1652,7 +1653,7 @@ enum efi_secureboot_mode {
\
arch_efi_call_virt_setup(); \
\
- local_save_flags(__flags); \
+ __flags = efi_call_virt_save_flags(); \
__s = arch_efi_call_virt(p, f, args); \
efi_call_virt_check_flags(__flags, __stringify(f)); \
\
@@ -1667,7 +1668,7 @@ enum efi_secureboot_mode {
\
arch_efi_call_virt_setup(); \
\
- local_save_flags(__flags); \
+ __flags = efi_call_virt_save_flags(); \
arch_efi_call_virt(p, f, args); \
efi_call_virt_check_flags(__flags, __stringify(f)); \
\
--
1.9.1
next prev parent reply other threads:[~2019-01-08 14:08 UTC|newest]
Thread overview: 57+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-01-08 14:07 [PATCH v8 00/26] arm64: provide pseudo NMI with GICv3 Julien Thierry
2019-01-08 14:07 ` [PATCH v8 01/26] arm64: Fix HCR.TGE status for NMI contexts Julien Thierry
2019-01-14 15:56 ` Catalin Marinas
2019-01-14 16:12 ` Julien Thierry
2019-01-14 17:25 ` James Morse
2019-01-28 9:16 ` Marc Zyngier
2019-01-08 14:07 ` [PATCH v8 02/26] arm64: Remove unused daif related functions/macros Julien Thierry
2019-01-08 14:07 ` [PATCH v8 03/26] arm64: cpufeature: Set SYSREG_GIC_CPUIF as a boot system feature Julien Thierry
2019-01-08 14:07 ` [PATCH v8 04/26] arm64: cpufeature: Add cpufeature for IRQ priority masking Julien Thierry
2019-01-08 14:07 ` [PATCH v8 05/26] arm/arm64: gic-v3: Add PMR and RPR accessors Julien Thierry
2019-01-08 14:07 ` [PATCH v8 06/26] irqchip/gic-v3: Switch to PMR masking before calling IRQ handler Julien Thierry
2019-01-08 14:07 ` [PATCH v8 07/26] arm64: ptrace: Provide definitions for PMR values Julien Thierry
2019-01-14 16:12 ` Catalin Marinas
2019-01-08 14:07 ` [PATCH v8 08/26] arm64: Make PMR part of task context Julien Thierry
2019-01-18 16:10 ` Catalin Marinas
2019-01-08 14:07 ` [PATCH v8 09/26] arm64: Unmask PMR before going idle Julien Thierry
2019-01-18 16:23 ` Catalin Marinas
2019-01-18 17:17 ` Julien Thierry
2019-01-08 14:07 ` [PATCH v8 10/26] arm64: kvm: Unmask PMR before entering guest Julien Thierry
2019-01-18 16:25 ` Catalin Marinas
2019-01-08 14:07 ` Julien Thierry [this message]
2019-01-18 16:26 ` [PATCH v8 11/26] efi: Let architectures decide the flags that should be saved/restored Catalin Marinas
2019-01-08 14:07 ` [PATCH v8 12/26] arm64: irqflags: Use ICC_PMR_EL1 for interrupt masking Julien Thierry
2019-01-08 15:40 ` Dave Martin
2019-01-08 15:51 ` Marc Zyngier
2019-01-08 16:45 ` Dave Martin
2019-01-08 17:16 ` Marc Zyngier
2019-01-08 18:01 ` Dave Martin
2019-01-08 17:58 ` Julien Thierry
2019-01-08 18:37 ` Dave Martin
2019-01-18 16:09 ` Catalin Marinas
2019-01-18 16:57 ` Julien Thierry
2019-01-18 17:30 ` Catalin Marinas
2019-01-18 17:33 ` Catalin Marinas
2019-01-21 8:45 ` Julien Thierry
2019-01-18 16:35 ` Dave Martin
2019-01-18 17:27 ` Julien Thierry
2019-01-18 18:23 ` Dave Martin
2019-01-08 14:07 ` [PATCH v8 13/26] arm64: daifflags: Include PMR in daifflags restore operations Julien Thierry
2019-01-18 16:43 ` Catalin Marinas
2019-01-08 14:07 ` [PATCH v8 14/26] arm64: alternative: Allow alternative status checking per cpufeature Julien Thierry
2019-01-08 14:07 ` [PATCH v8 15/26] arm64: alternative: Apply alternatives early in boot process Julien Thierry
2019-01-08 14:51 ` Suzuki K Poulose
2019-01-08 15:20 ` Julien Thierry
2019-01-08 17:40 ` Suzuki K Poulose
2019-01-10 10:50 ` Julien Thierry
2019-01-08 14:07 ` [PATCH v8 16/26] irqchip/gic-v3: Factor group0 detection into functions Julien Thierry
2019-01-08 14:07 ` [PATCH v8 17/26] arm64: Switch to PMR masking when starting CPUs Julien Thierry
2019-01-08 14:07 ` [PATCH v8 18/26] arm64: gic-v3: Implement arch support for priority masking Julien Thierry
2019-01-08 14:07 ` [PATCH v8 19/26] irqchip/gic-v3: Detect if GIC can support pseudo-NMIs Julien Thierry
2019-01-08 14:07 ` [PATCH v8 20/26] irqchip/gic-v3: Handle pseudo-NMIs Julien Thierry
2019-01-08 14:07 ` [PATCH v8 21/26] irqchip/gic: Add functions to access irq priorities Julien Thierry
2019-01-08 14:07 ` [PATCH v8 22/26] irqchip/gic-v3: Allow interrupts to be set as pseudo-NMI Julien Thierry
2019-01-08 14:07 ` [PATCH v8 23/26] arm64: Handle serror in NMI context Julien Thierry
2019-01-08 14:07 ` [PATCH v8 24/26] arm64: Skip preemption when exiting an NMI Julien Thierry
2019-01-08 14:07 ` [PATCH v8 25/26] arm64: Skip irqflags tracing for NMI in IRQs disabled context Julien Thierry
2019-01-08 14:07 ` [PATCH v8 26/26] arm64: Enable the support of pseudo-NMIs Julien Thierry
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1546956464-48825-12-git-send-email-julien.thierry@arm.com \
--to=julien.thierry@arm.com \
--cc=catalin.marinas@arm.com \
--cc=christoffer.dall@arm.com \
--cc=daniel.thompson@linaro.org \
--cc=james.morse@arm.com \
--cc=joel@joelfernandes.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=marc.zyngier@arm.com \
--cc=mark.rutland@arm.com \
--cc=will.deacon@arm.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®