From: Julien Thierry <julien.thierry@arm.com>
To: linux-arm-kernel@lists.infradead.org
Cc: linux-kernel@vger.kernel.org, daniel.thompson@linaro.org,
joel@joelfernandes.org, marc.zyngier@arm.com,
christoffer.dall@arm.com, james.morse@arm.com,
catalin.marinas@arm.com, will.deacon@arm.com,
mark.rutland@arm.com, Julien Thierry <julien.thierry@arm.com>,
kvmarm@lists.cs.columbia.edu
Subject: [PATCH v10 10/25] arm64: kvm: Unmask PMR before entering guest
Date: Thu, 31 Jan 2019 14:58:48 +0000 [thread overview]
Message-ID: <1548946743-38979-11-git-send-email-julien.thierry@arm.com> (raw)
In-Reply-To: <1548946743-38979-1-git-send-email-julien.thierry@arm.com>
Interrupts masked by ICC_PMR_EL1 will not be signaled to the CPU. This
means that hypervisor will not receive masked interrupts while running a
guest.
We need to make sure that all maskable interrupts are masked from the
time we call local_irq_disable() in the main run loop, and remain so
until we call local_irq_enable() after returning from the guest, and we
need to ensure that we see no interrupts at all (including pseudo-NMIs)
in the middle of the VM world-switch, while at the same time we need to
ensure we exit the guest when there are interrupts for the host.
We can accomplish this with pseudo-NMIs enabled by:
(1) local_irq_disable: set the priority mask
(2) enter guest: set PSTATE.I
(3) clear the priority mask
(4) eret to guest
(5) exit guest: set the priotiy mask
clear PSTATE.I (and restore other host PSTATE bits)
(6) local_irq_enable: clear the priority mask.
Signed-off-by: Julien Thierry <julien.thierry@arm.com>
Acked-by: Catalin Marinas <catalin.marinas@arm.com>
Reviewed-by: Marc Zyngier <marc.zyngier@arm.com>
Reviewed-by: Christoffer Dall <christoffer.dall@arm.com>
Cc: Christoffer Dall <christoffer.dall@arm.com>
Cc: Marc Zyngier <marc.zyngier@arm.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Will Deacon <will.deacon@arm.com>
Cc: kvmarm@lists.cs.columbia.edu
---
arch/arm64/include/asm/kvm_host.h | 16 ++++++++++++++++
arch/arm64/kvm/hyp/switch.c | 16 ++++++++++++++++
2 files changed, 32 insertions(+)
diff --git a/arch/arm64/include/asm/kvm_host.h b/arch/arm64/include/asm/kvm_host.h
index 7732d0b..292c882 100644
--- a/arch/arm64/include/asm/kvm_host.h
+++ b/arch/arm64/include/asm/kvm_host.h
@@ -24,6 +24,7 @@
#include <linux/types.h>
#include <linux/kvm_types.h>
+#include <asm/arch_gicv3.h>
#include <asm/cpufeature.h>
#include <asm/daifflags.h>
#include <asm/fpsimd.h>
@@ -474,10 +475,25 @@ static inline int kvm_arch_vcpu_run_pid_change(struct kvm_vcpu *vcpu)
static inline void kvm_arm_vhe_guest_enter(void)
{
local_daif_mask();
+
+ /*
+ * Having IRQs masked via PMR when entering the guest means the GIC
+ * will not signal the CPU of interrupts of lower priority, and the
+ * only way to get out will be via guest exceptions.
+ * Naturally, we want to avoid this.
+ */
+ if (system_uses_irq_prio_masking()) {
+ gic_write_pmr(GIC_PRIO_IRQON);
+ dsb(sy);
+ }
}
static inline void kvm_arm_vhe_guest_exit(void)
{
+ /*
+ * local_daif_restore() takes care to properly restore PSTATE.DAIF
+ * and the GIC PMR if the host is using IRQ priorities.
+ */
local_daif_restore(DAIF_PROCCTX_NOIRQ);
/*
diff --git a/arch/arm64/kvm/hyp/switch.c b/arch/arm64/kvm/hyp/switch.c
index b0b1478..6a4c2d6 100644
--- a/arch/arm64/kvm/hyp/switch.c
+++ b/arch/arm64/kvm/hyp/switch.c
@@ -22,6 +22,7 @@
#include <kvm/arm_psci.h>
+#include <asm/arch_gicv3.h>
#include <asm/cpufeature.h>
#include <asm/kvm_asm.h>
#include <asm/kvm_emulate.h>
@@ -521,6 +522,17 @@ int __hyp_text __kvm_vcpu_run_nvhe(struct kvm_vcpu *vcpu)
struct kvm_cpu_context *guest_ctxt;
u64 exit_code;
+ /*
+ * Having IRQs masked via PMR when entering the guest means the GIC
+ * will not signal the CPU of interrupts of lower priority, and the
+ * only way to get out will be via guest exceptions.
+ * Naturally, we want to avoid this.
+ */
+ if (system_uses_irq_prio_masking()) {
+ gic_write_pmr(GIC_PRIO_IRQON);
+ dsb(sy);
+ }
+
vcpu = kern_hyp_va(vcpu);
host_ctxt = kern_hyp_va(vcpu->arch.host_cpu_context);
@@ -573,6 +585,10 @@ int __hyp_text __kvm_vcpu_run_nvhe(struct kvm_vcpu *vcpu)
*/
__debug_switch_to_host(vcpu);
+ /* Returning to host will clear PSR.I, remask PMR if needed */
+ if (system_uses_irq_prio_masking())
+ gic_write_pmr(GIC_PRIO_IRQOFF);
+
return exit_code;
}
--
1.9.1
next prev parent reply other threads:[~2019-01-31 14:59 UTC|newest]
Thread overview: 32+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-01-31 14:58 [PATCH v10 00/25] arm64: provide pseudo NMI with GICv3 Julien Thierry
2019-01-31 14:58 ` [PATCH v10 01/25] arm64: Fix HCR.TGE status for NMI contexts Julien Thierry
2019-01-31 14:58 ` [PATCH v10 02/25] arm64: Remove unused daif related functions/macros Julien Thierry
2019-01-31 14:58 ` [PATCH v10 03/25] arm64: cpufeature: Set SYSREG_GIC_CPUIF as a boot system feature Julien Thierry
2019-01-31 14:58 ` [PATCH v10 04/25] arm64: cpufeature: Add cpufeature for IRQ priority masking Julien Thierry
2019-01-31 14:58 ` [PATCH v10 05/25] arm/arm64: gic-v3: Add PMR and RPR accessors Julien Thierry
2019-01-31 14:58 ` [PATCH v10 06/25] irqchip/gic-v3: Switch to PMR masking before calling IRQ handler Julien Thierry
2019-01-31 14:58 ` [PATCH v10 07/25] arm64: ptrace: Provide definitions for PMR values Julien Thierry
2019-01-31 14:58 ` [PATCH v10 08/25] arm64: Make PMR part of task context Julien Thierry
2019-01-31 14:58 ` [PATCH v10 09/25] arm64: Unmask PMR before going idle Julien Thierry
2019-01-31 14:58 ` Julien Thierry [this message]
2019-01-31 14:58 ` [PATCH v10 11/25] efi: Let architectures decide the flags that should be saved/restored Julien Thierry
2019-01-31 14:58 ` [PATCH v10 12/25] arm64: irqflags: Use ICC_PMR_EL1 for interrupt masking Julien Thierry
2019-02-08 4:35 ` Nathan Chancellor
2019-02-08 9:36 ` Julien Thierry
2019-02-08 16:00 ` Nathan Chancellor
2019-02-08 16:16 ` Catalin Marinas
2019-01-31 14:58 ` [PATCH v10 13/25] arm64: daifflags: Include PMR in daifflags restore operations Julien Thierry
2019-01-31 14:58 ` [PATCH v10 14/25] arm64: alternative: Allow alternative status checking per cpufeature Julien Thierry
2019-01-31 14:58 ` [PATCH v10 15/25] arm64: alternative: Apply alternatives early in boot process Julien Thierry
2019-01-31 14:58 ` [PATCH v10 16/25] irqchip/gic-v3: Factor group0 detection into functions Julien Thierry
2019-01-31 14:58 ` [PATCH v10 17/25] arm64: Switch to PMR masking when starting CPUs Julien Thierry
2019-01-31 14:58 ` [PATCH v10 18/25] arm64: gic-v3: Implement arch support for priority masking Julien Thierry
2019-01-31 14:58 ` [PATCH v10 19/25] irqchip/gic-v3: Detect if GIC can support pseudo-NMIs Julien Thierry
2019-01-31 14:58 ` [PATCH v10 20/25] irqchip/gic-v3: Handle pseudo-NMIs Julien Thierry
2019-01-31 14:58 ` [PATCH v10 21/25] irqchip/gic-v3: Allow interrupts to be set as pseudo-NMI Julien Thierry
2019-01-31 14:59 ` [PATCH v10 22/25] arm64: Handle serror in NMI context Julien Thierry
2019-01-31 14:59 ` [PATCH v10 23/25] arm64: Skip preemption when exiting an NMI Julien Thierry
2019-01-31 14:59 ` [PATCH v10 24/25] arm64: Skip irqflags tracing for NMI in IRQs disabled context Julien Thierry
2019-01-31 14:59 ` [PATCH v10 25/25] arm64: Enable the support of pseudo-NMIs Julien Thierry
2019-02-06 10:27 ` [PATCH v10 00/25] arm64: provide pseudo NMI with GICv3 Catalin Marinas
2019-02-07 14:21 ` Daniel Thompson
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1548946743-38979-11-git-send-email-julien.thierry@arm.com \
--to=julien.thierry@arm.com \
--cc=catalin.marinas@arm.com \
--cc=christoffer.dall@arm.com \
--cc=daniel.thompson@linaro.org \
--cc=james.morse@arm.com \
--cc=joel@joelfernandes.org \
--cc=kvmarm@lists.cs.columbia.edu \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=marc.zyngier@arm.com \
--cc=mark.rutland@arm.com \
--cc=will.deacon@arm.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®