From: Julien Thierry <julien.thierry@arm.com>
To: linux-arm-kernel@lists.infradead.org
Cc: linux-kernel@vger.kernel.org, daniel.thompson@linaro.org,
joel@joelfernandes.org, marc.zyngier@arm.com,
christoffer.dall@arm.com, james.morse@arm.com,
catalin.marinas@arm.com, will.deacon@arm.com,
mark.rutland@arm.com, Julien Thierry <julien.thierry@arm.com>
Subject: [PATCH v10 13/25] arm64: daifflags: Include PMR in daifflags restore operations
Date: Thu, 31 Jan 2019 14:58:51 +0000 [thread overview]
Message-ID: <1548946743-38979-14-git-send-email-julien.thierry@arm.com> (raw)
In-Reply-To: <1548946743-38979-1-git-send-email-julien.thierry@arm.com>
The addition of PMR should not bypass the semantics of daifflags.
When DA_F are set, I bit is also set as no interrupts (even of higher
priority) is allowed.
When DA_F are cleared, I bit is cleared and interrupt enabling/disabling
goes through ICC_PMR_EL1.
Signed-off-by: Julien Thierry <julien.thierry@arm.com>
Reviewed-by: Catalin Marinas <catalin.marinas@arm.com>
Reviewed-by: Marc Zyngier <marc.zyngier@arm.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Will Deacon <will.deacon@arm.com>
Cc: James Morse <james.morse@arm.com>
---
arch/arm64/include/asm/daifflags.h | 50 +++++++++++++++++++++++++++++++++++---
1 file changed, 46 insertions(+), 4 deletions(-)
diff --git a/arch/arm64/include/asm/daifflags.h b/arch/arm64/include/asm/daifflags.h
index 546bc39..1dd3d7a 100644
--- a/arch/arm64/include/asm/daifflags.h
+++ b/arch/arm64/include/asm/daifflags.h
@@ -18,6 +18,8 @@
#include <linux/irqflags.h>
+#include <asm/cpufeature.h>
+
#define DAIF_PROCCTX 0
#define DAIF_PROCCTX_NOIRQ PSR_I_BIT
@@ -36,7 +38,13 @@ static inline unsigned long local_daif_save(void)
{
unsigned long flags;
- flags = arch_local_save_flags();
+ flags = read_sysreg(daif);
+
+ if (system_uses_irq_prio_masking()) {
+ /* If IRQs are masked with PMR, reflect it in the flags */
+ if (read_sysreg_s(SYS_ICC_PMR_EL1) <= GIC_PRIO_IRQOFF)
+ flags |= PSR_I_BIT;
+ }
local_daif_mask();
@@ -45,12 +53,46 @@ static inline unsigned long local_daif_save(void)
static inline void local_daif_restore(unsigned long flags)
{
- if (!arch_irqs_disabled_flags(flags))
+ bool irq_disabled = flags & PSR_I_BIT;
+
+ if (!irq_disabled) {
trace_hardirqs_on();
- arch_local_irq_restore(flags);
+ if (system_uses_irq_prio_masking())
+ arch_local_irq_enable();
+ } else if (!(flags & PSR_A_BIT)) {
+ /*
+ * If interrupts are disabled but we can take
+ * asynchronous errors, we can take NMIs
+ */
+ if (system_uses_irq_prio_masking()) {
+ flags &= ~PSR_I_BIT;
+ /*
+ * There has been concern that the write to daif
+ * might be reordered before this write to PMR.
+ * From the ARM ARM DDI 0487D.a, section D1.7.1
+ * "Accessing PSTATE fields":
+ * Writes to the PSTATE fields have side-effects on
+ * various aspects of the PE operation. All of these
+ * side-effects are guaranteed:
+ * - Not to be visible to earlier instructions in
+ * the execution stream.
+ * - To be visible to later instructions in the
+ * execution stream
+ *
+ * Also, writes to PMR are self-synchronizing, so no
+ * interrupts with a lower priority than PMR is signaled
+ * to the PE after the write.
+ *
+ * So we don't need additional synchronization here.
+ */
+ arch_local_irq_disable();
+ }
+ }
+
+ write_sysreg(flags, daif);
- if (arch_irqs_disabled_flags(flags))
+ if (irq_disabled)
trace_hardirqs_off();
}
--
1.9.1
next prev parent reply other threads:[~2019-01-31 15:00 UTC|newest]
Thread overview: 32+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-01-31 14:58 [PATCH v10 00/25] arm64: provide pseudo NMI with GICv3 Julien Thierry
2019-01-31 14:58 ` [PATCH v10 01/25] arm64: Fix HCR.TGE status for NMI contexts Julien Thierry
2019-01-31 14:58 ` [PATCH v10 02/25] arm64: Remove unused daif related functions/macros Julien Thierry
2019-01-31 14:58 ` [PATCH v10 03/25] arm64: cpufeature: Set SYSREG_GIC_CPUIF as a boot system feature Julien Thierry
2019-01-31 14:58 ` [PATCH v10 04/25] arm64: cpufeature: Add cpufeature for IRQ priority masking Julien Thierry
2019-01-31 14:58 ` [PATCH v10 05/25] arm/arm64: gic-v3: Add PMR and RPR accessors Julien Thierry
2019-01-31 14:58 ` [PATCH v10 06/25] irqchip/gic-v3: Switch to PMR masking before calling IRQ handler Julien Thierry
2019-01-31 14:58 ` [PATCH v10 07/25] arm64: ptrace: Provide definitions for PMR values Julien Thierry
2019-01-31 14:58 ` [PATCH v10 08/25] arm64: Make PMR part of task context Julien Thierry
2019-01-31 14:58 ` [PATCH v10 09/25] arm64: Unmask PMR before going idle Julien Thierry
2019-01-31 14:58 ` [PATCH v10 10/25] arm64: kvm: Unmask PMR before entering guest Julien Thierry
2019-01-31 14:58 ` [PATCH v10 11/25] efi: Let architectures decide the flags that should be saved/restored Julien Thierry
2019-01-31 14:58 ` [PATCH v10 12/25] arm64: irqflags: Use ICC_PMR_EL1 for interrupt masking Julien Thierry
2019-02-08 4:35 ` Nathan Chancellor
2019-02-08 9:36 ` Julien Thierry
2019-02-08 16:00 ` Nathan Chancellor
2019-02-08 16:16 ` Catalin Marinas
2019-01-31 14:58 ` Julien Thierry [this message]
2019-01-31 14:58 ` [PATCH v10 14/25] arm64: alternative: Allow alternative status checking per cpufeature Julien Thierry
2019-01-31 14:58 ` [PATCH v10 15/25] arm64: alternative: Apply alternatives early in boot process Julien Thierry
2019-01-31 14:58 ` [PATCH v10 16/25] irqchip/gic-v3: Factor group0 detection into functions Julien Thierry
2019-01-31 14:58 ` [PATCH v10 17/25] arm64: Switch to PMR masking when starting CPUs Julien Thierry
2019-01-31 14:58 ` [PATCH v10 18/25] arm64: gic-v3: Implement arch support for priority masking Julien Thierry
2019-01-31 14:58 ` [PATCH v10 19/25] irqchip/gic-v3: Detect if GIC can support pseudo-NMIs Julien Thierry
2019-01-31 14:58 ` [PATCH v10 20/25] irqchip/gic-v3: Handle pseudo-NMIs Julien Thierry
2019-01-31 14:58 ` [PATCH v10 21/25] irqchip/gic-v3: Allow interrupts to be set as pseudo-NMI Julien Thierry
2019-01-31 14:59 ` [PATCH v10 22/25] arm64: Handle serror in NMI context Julien Thierry
2019-01-31 14:59 ` [PATCH v10 23/25] arm64: Skip preemption when exiting an NMI Julien Thierry
2019-01-31 14:59 ` [PATCH v10 24/25] arm64: Skip irqflags tracing for NMI in IRQs disabled context Julien Thierry
2019-01-31 14:59 ` [PATCH v10 25/25] arm64: Enable the support of pseudo-NMIs Julien Thierry
2019-02-06 10:27 ` [PATCH v10 00/25] arm64: provide pseudo NMI with GICv3 Catalin Marinas
2019-02-07 14:21 ` Daniel Thompson
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1548946743-38979-14-git-send-email-julien.thierry@arm.com \
--to=julien.thierry@arm.com \
--cc=catalin.marinas@arm.com \
--cc=christoffer.dall@arm.com \
--cc=daniel.thompson@linaro.org \
--cc=james.morse@arm.com \
--cc=joel@joelfernandes.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=marc.zyngier@arm.com \
--cc=mark.rutland@arm.com \
--cc=will.deacon@arm.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®