From: John Garry <john.garry@huawei.com>
To: <jejb@linux.vnet.ibm.com>, <martin.petersen@oracle.com>
Cc: <linuxarm@huawei.com>, <linux-kernel@vger.kernel.org>,
<linux-scsi@vger.kernel.org>, Xiaofei Tan <tanxiaofei@huawei.com>,
John Garry <john.garry@huawei.com>
Subject: [PATCH 3/6] scsi: hisi_sas: print PHY RX errors count for later revision of v3 hw
Date: Thu, 28 Feb 2019 22:50:59 +0800 [thread overview]
Message-ID: <1551365462-128193-4-git-send-email-john.garry@huawei.com> (raw)
In-Reply-To: <1551365462-128193-1-git-send-email-john.garry@huawei.com>
From: Xiaofei Tan <tanxiaofei@huawei.com>
The later revision of v3 hw has added an function of interrupt coalesce
according to time for PHY RX errors. We set the coalesce time to 1s.
Then we print PHY RX errors count when PHY RX errors happen, and don't
need to worry that there may be too much log prints.
Besides, we use hisi_sas_phy.lock to protect error count value. Because
we update them by calling phy_get_events_v3_hw(), which is also used by
core driver (for get PHY events function).
We relocate phy_get_events_v3_hw() to avoid a further declaration.
Signed-off-by: Xiaofei Tan <tanxiaofei@huawei.com>
Signed-off-by: John Garry <john.garry@huawei.com>
---
drivers/scsi/hisi_sas/hisi_sas.h | 1 +
drivers/scsi/hisi_sas/hisi_sas_v3_hw.c | 84 ++++++++++++++++++--------
2 files changed, 60 insertions(+), 25 deletions(-)
diff --git a/drivers/scsi/hisi_sas/hisi_sas.h b/drivers/scsi/hisi_sas/hisi_sas.h
index 6c87bd34509a..515aee9318a4 100644
--- a/drivers/scsi/hisi_sas/hisi_sas.h
+++ b/drivers/scsi/hisi_sas/hisi_sas.h
@@ -161,6 +161,7 @@ struct hisi_sas_phy {
u8 in_reset;
u8 reserved[2];
u32 phy_type;
+ u32 code_violation_err_count;
enum sas_linkrate minimum_linkrate;
enum sas_linkrate maximum_linkrate;
};
diff --git a/drivers/scsi/hisi_sas/hisi_sas_v3_hw.c b/drivers/scsi/hisi_sas/hisi_sas_v3_hw.c
index 151a102c4cc7..720721196b12 100644
--- a/drivers/scsi/hisi_sas/hisi_sas_v3_hw.c
+++ b/drivers/scsi/hisi_sas/hisi_sas_v3_hw.c
@@ -181,6 +181,8 @@
#define CHL_INT1_DMAC_RX_AXI_RD_ERR_OFF 22
#define CHL_INT2 (PORT_BASE + 0x1bc)
#define CHL_INT2_SL_IDAF_TOUT_CONF_OFF 0
+#define CHL_INT2_RX_DISP_ERR_OFF 28
+#define CHL_INT2_RX_CODE_ERR_OFF 29
#define CHL_INT2_RX_INVLD_DW_OFF 30
#define CHL_INT2_STP_LINK_TIMEOUT_OFF 31
#define CHL_INT0_MSK (PORT_BASE + 0x1c0)
@@ -544,6 +546,8 @@ static void init_reg_v3_hw(struct hisi_hba *hisi_hba)
hisi_sas_phy_write32(hisi_hba, i, STP_LINK_TIMER, 0x7f7a120);
hisi_sas_phy_write32(hisi_hba, i, CON_CFG_DRIVER, 0x2a0a01);
hisi_sas_phy_write32(hisi_hba, i, SAS_SSP_CON_TIMER_CFG, 0x32);
+ hisi_sas_phy_write32(hisi_hba, i, SAS_EC_INT_COAL_TIME,
+ 0x30f4240);
/* used for 12G negotiate */
hisi_sas_phy_write32(hisi_hba, i, COARSETUNE_TIME, 0x1e);
hisi_sas_phy_write32(hisi_hba, i, AIP_LIMIT, 0x2ffff);
@@ -1576,6 +1580,39 @@ static void handle_chl_int1_v3_hw(struct hisi_hba *hisi_hba, int phy_no)
hisi_sas_phy_write32(hisi_hba, phy_no, CHL_INT1, irq_value);
}
+static void phy_get_events_v3_hw(struct hisi_hba *hisi_hba, int phy_no)
+{
+ struct hisi_sas_phy *phy = &hisi_hba->phy[phy_no];
+ struct asd_sas_phy *sas_phy = &phy->sas_phy;
+ struct sas_phy *sphy = sas_phy->phy;
+ unsigned long flags;
+ u32 reg_value;
+
+ spin_lock_irqsave(&phy->lock, flags);
+
+ /* loss dword sync */
+ reg_value = hisi_sas_phy_read32(hisi_hba, phy_no, ERR_CNT_DWS_LOST);
+ sphy->loss_of_dword_sync_count += reg_value;
+
+ /* phy reset problem */
+ reg_value = hisi_sas_phy_read32(hisi_hba, phy_no, ERR_CNT_RESET_PROB);
+ sphy->phy_reset_problem_count += reg_value;
+
+ /* invalid dword */
+ reg_value = hisi_sas_phy_read32(hisi_hba, phy_no, ERR_CNT_INVLD_DW);
+ sphy->invalid_dword_count += reg_value;
+
+ /* disparity err */
+ reg_value = hisi_sas_phy_read32(hisi_hba, phy_no, ERR_CNT_DISP_ERR);
+ sphy->running_disparity_error_count += reg_value;
+
+ /* code violation error */
+ reg_value = hisi_sas_phy_read32(hisi_hba, phy_no, ERR_CNT_CODE_ERR);
+ phy->code_violation_err_count += reg_value;
+
+ spin_unlock_irqrestore(&phy->lock, flags);
+}
+
static void handle_chl_int2_v3_hw(struct hisi_hba *hisi_hba, int phy_no)
{
u32 irq_msk = hisi_sas_phy_read32(hisi_hba, phy_no, CHL_INT2_MSK);
@@ -1583,6 +1620,9 @@ static void handle_chl_int2_v3_hw(struct hisi_hba *hisi_hba, int phy_no)
struct hisi_sas_phy *phy = &hisi_hba->phy[phy_no];
struct pci_dev *pci_dev = hisi_hba->pci_dev;
struct device *dev = hisi_hba->dev;
+ static const u32 msk = BIT(CHL_INT2_RX_DISP_ERR_OFF) |
+ BIT(CHL_INT2_RX_CODE_ERR_OFF) |
+ BIT(CHL_INT2_RX_INVLD_DW_OFF);
irq_value &= ~irq_msk;
if (!irq_value)
@@ -1603,6 +1643,25 @@ static void handle_chl_int2_v3_hw(struct hisi_hba *hisi_hba, int phy_no)
hisi_sas_notify_phy_event(phy, HISI_PHYE_LINK_RESET);
}
+ if (pci_dev->revision > 0x20 && (irq_value & msk)) {
+ struct asd_sas_phy *sas_phy = &phy->sas_phy;
+ struct sas_phy *sphy = sas_phy->phy;
+
+ phy_get_events_v3_hw(hisi_hba, phy_no);
+
+ if (irq_value & BIT(CHL_INT2_RX_INVLD_DW_OFF))
+ dev_info(dev, "phy%d invalid dword cnt: %u\n", phy_no,
+ sphy->invalid_dword_count);
+
+ if (irq_value & BIT(CHL_INT2_RX_CODE_ERR_OFF))
+ dev_info(dev, "phy%d code violation cnt: %u\n", phy_no,
+ phy->code_violation_err_count);
+
+ if (irq_value & BIT(CHL_INT2_RX_DISP_ERR_OFF))
+ dev_info(dev, "phy%d disparity error cnt: %u\n", phy_no,
+ sphy->running_disparity_error_count);
+ }
+
if ((irq_value & BIT(CHL_INT2_RX_INVLD_DW_OFF)) &&
(pci_dev->revision == 0x20)) {
u32 reg_value;
@@ -2231,31 +2290,6 @@ static u32 get_phys_state_v3_hw(struct hisi_hba *hisi_hba)
return hisi_sas_read32(hisi_hba, PHY_STATE);
}
-static void phy_get_events_v3_hw(struct hisi_hba *hisi_hba, int phy_no)
-{
- struct hisi_sas_phy *phy = &hisi_hba->phy[phy_no];
- struct asd_sas_phy *sas_phy = &phy->sas_phy;
- struct sas_phy *sphy = sas_phy->phy;
- u32 reg_value;
-
- /* loss dword sync */
- reg_value = hisi_sas_phy_read32(hisi_hba, phy_no, ERR_CNT_DWS_LOST);
- sphy->loss_of_dword_sync_count += reg_value;
-
- /* phy reset problem */
- reg_value = hisi_sas_phy_read32(hisi_hba, phy_no, ERR_CNT_RESET_PROB);
- sphy->phy_reset_problem_count += reg_value;
-
- /* invalid dword */
- reg_value = hisi_sas_phy_read32(hisi_hba, phy_no, ERR_CNT_INVLD_DW);
- sphy->invalid_dword_count += reg_value;
-
- /* disparity err */
- reg_value = hisi_sas_phy_read32(hisi_hba, phy_no, ERR_CNT_DISP_ERR);
- sphy->running_disparity_error_count += reg_value;
-
-}
-
static int disable_host_v3_hw(struct hisi_hba *hisi_hba)
{
struct device *dev = hisi_hba->dev;
--
2.17.1
next prev parent reply other threads:[~2019-02-28 14:51 UTC|newest]
Thread overview: 8+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-02-28 14:50 [PATCH 0/6] hisi_sas: Some misc patches John Garry
2019-02-28 14:50 ` [PATCH 1/6] scsi: hisi_sas: Change return variable type in phy_up_v3_hw() John Garry
2019-02-28 14:50 ` [PATCH 2/6] scsi: hisi_sas: Fix a timeout race of driver internal and SMP IO John Garry
2019-02-28 14:50 ` John Garry [this message]
2019-02-28 14:51 ` [PATCH 4/6] scsi: hisi_sas: Set PHY linkrate when disconnected John Garry
2019-02-28 14:51 ` [PATCH 5/6] scsi: hisi_sas: Send HARD RESET to clear the previous affiliation of STP target port John Garry
2019-02-28 14:51 ` [PATCH 6/6] scsi: hisi_sas: Change SERDES_CFG init value to increase reliability of HiLink John Garry
2019-03-07 0:27 ` [PATCH 0/6] hisi_sas: Some misc patches Martin K. Petersen
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1551365462-128193-4-git-send-email-john.garry@huawei.com \
--to=john.garry@huawei.com \
--cc=jejb@linux.vnet.ibm.com \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-scsi@vger.kernel.org \
--cc=linuxarm@huawei.com \
--cc=martin.petersen@oracle.com \
--cc=tanxiaofei@huawei.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®