[PATCH 0/4] add dts for Mediatek MT8183 thermal functions

[PATCH 0/4] add dts for Mediatek MT8183 thermal functions

[Michael Kao]

Splitting the dtsi part from [1] and sending it again.

Add tzts1~5 and tztsABB from thermal sensor in SoC for
another get temperatrue. They don't need to thermal throttle.
And we bind coolers for thermal zone nodes of cpu_thermal.

Refernece:
[1] [v2,0/8] Add Mediatek thermal dirver and dtsi (https://patchwork.kernel.org/cover/10938809/)

Matthias Kaehlcke (1):
  arm64: dts: mt8183: Configure CPU cooling

michael.kao (3):
  arm64: dts: mt8183: add thermal zone node
  arm64: dts: mt8183: add dynamic power coefficients
  arm64: dts: mt8183: Add #cooling-cells to CPU nodes

 arch/arm64/boot/dts/mediatek/mt8183.dtsi | 139 +++++++++++++++++++++++++++++++
 1 file changed, 139 insertions(+)

[PATCH 4/4] arm64: dts: mt8183: Configure CPU cooling

[Michael Kao]

From: Matthias Kaehlcke <mka@chromium.org>

Add SoC temperature threshold at 68°C and target at 80°C.
Add trip points and cooling maps for big and litter clusters.

Signed-off-by: Matthias Kaehlcke <mka@chromium.org>
Signed-off-by: Michael Kao <michael.kao@mediatek.com>
---
 arch/arm64/boot/dts/mediatek/mt8183.dtsi | 55 ++++++++++++++++++++++++++++++++
 1 file changed, 55 insertions(+)

diff --git a/arch/arm64/boot/dts/mediatek/mt8183.dtsi b/arch/arm64/boot/dts/mediatek/mt8183.dtsi
index bc42b82..6611d29 100644
--- a/arch/arm64/boot/dts/mediatek/mt8183.dtsi
+++ b/arch/arm64/boot/dts/mediatek/mt8183.dtsi
@@ -411,6 +411,61 @@
 				polling-delay = <500>;
 				thermal-sensors = <&thermal 0>;
 				sustainable-power = <4500>;
+
+				trips {
+					threshold: trip-point@0 {
+						temperature = <68000>;
+						hysteresis = <2000>;
+						type = "passive";
+					};
+
+					target: trip-point@1 {
+						temperature = <80000>;
+						hysteresis = <2000>;
+						type = "passive";
+					};
+
+					cpu_crit: cpu-crit {
+						temperature = <115000>;
+						hysteresis = <2000>;
+						type = "critical";
+					};
+				};
+
+				cooling-maps {
+					map0 {
+						trip = <&target>;
+						cooling-device = <&cpu0
+							THERMAL_NO_LIMIT
+							THERMAL_NO_LIMIT>,
+								 <&cpu1
+							THERMAL_NO_LIMIT
+							THERMAL_NO_LIMIT>,
+								 <&cpu2
+							THERMAL_NO_LIMIT
+							THERMAL_NO_LIMIT>,
+								 <&cpu3
+							THERMAL_NO_LIMIT
+							THERMAL_NO_LIMIT>;
+						contribution = <3072>;
+					};
+					map1 {
+						trip = <&target>;
+						cooling-device = <&cpu4
+							THERMAL_NO_LIMIT
+							14>,
+								 <&cpu5
+							THERMAL_NO_LIMIT
+							14>,
+								 <&cpu6
+							THERMAL_NO_LIMIT
+							14>,
+								 <&cpu7
+							THERMAL_NO_LIMIT
+							14>;
+						contribution = <1024>;
+					};
+				};
 			};
 
 			/* The tzts1 ~ tzts6 don't need to polling */
-- 
1.9.1