From: Krishna Yarlagadda <kyarlagadda@nvidia.com>
To: <gregkh@linuxfoundation.org>, <robh+dt@kernel.org>,
<mark.rutland@arm.com>, <thierry.reding@gmail.com>,
<jonathanh@nvidia.com>, <ldewangan@nvidia.com>, <jslaby@suse.com>
Cc: <linux-serial@vger.kernel.org>, <devicetree@vger.kernel.org>,
<linux-tegra@vger.kernel.org>, <linux-kernel@vger.kernel.org>,
Krishna Yarlagadda <kyarlagadda@nvidia.com>,
Shardar Shariff Md <smohammed@nvidia.com>
Subject: [PATCH V2 12/12] serial: tegra: Add PIO mode support
Date: Wed, 4 Sep 2019 10:13:07 +0530 [thread overview]
Message-ID: <1567572187-29820-13-git-send-email-kyarlagadda@nvidia.com> (raw)
In-Reply-To: <1567572187-29820-1-git-send-email-kyarlagadda@nvidia.com>
Add PIO mode support in receive and transmit path with RX interrupt
trigger of 16 bytes for Tegra194 and older chips.
Signed-off-by: Shardar Shariff Md <smohammed@nvidia.com>
Signed-off-by: Krishna Yarlagadda <kyarlagadda@nvidia.com>
---
drivers/tty/serial/serial-tegra.c | 117 ++++++++++++++++++++++++++++----------
1 file changed, 86 insertions(+), 31 deletions(-)
diff --git a/drivers/tty/serial/serial-tegra.c b/drivers/tty/serial/serial-tegra.c
index d0fd417..2f59951 100644
--- a/drivers/tty/serial/serial-tegra.c
+++ b/drivers/tty/serial/serial-tegra.c
@@ -139,6 +139,8 @@ struct tegra_uart_port {
int n_adjustable_baud_rates;
int required_rate;
int configured_rate;
+ bool use_rx_pio;
+ bool use_tx_pio;
};
static void tegra_uart_start_next_tx(struct tegra_uart_port *tup);
@@ -567,7 +569,7 @@ static void tegra_uart_start_next_tx(struct tegra_uart_port *tup)
if (!count)
return;
- if (count < TEGRA_UART_MIN_DMA)
+ if (tup->use_tx_pio || count < TEGRA_UART_MIN_DMA)
tegra_uart_start_pio_tx(tup, count);
else if (BYTES_TO_ALIGN(tail) > 0)
tegra_uart_start_pio_tx(tup, BYTES_TO_ALIGN(tail));
@@ -800,6 +802,18 @@ static void tegra_uart_handle_modem_signal_change(struct uart_port *u)
uart_handle_cts_change(&tup->uport, msr & UART_MSR_CTS);
}
+static void do_handle_rx_pio(struct tegra_uart_port *tup)
+{
+ struct tty_struct *tty = tty_port_tty_get(&tup->uport.state->port);
+ struct tty_port *port = &tup->uport.state->port;
+
+ tegra_uart_handle_rx_pio(tup, port);
+ if (tty) {
+ tty_flip_buffer_push(port);
+ tty_kref_put(tty);
+ }
+}
+
static irqreturn_t tegra_uart_isr(int irq, void *data)
{
struct tegra_uart_port *tup = data;
@@ -813,7 +827,7 @@ static irqreturn_t tegra_uart_isr(int irq, void *data)
while (1) {
iir = tegra_uart_read(tup, UART_IIR);
if (iir & UART_IIR_NO_INT) {
- if (is_rx_int) {
+ if (!tup->use_rx_pio && is_rx_int) {
tegra_uart_handle_rx_dma(tup);
if (tup->rx_in_progress) {
ier = tup->ier_shadow;
@@ -841,7 +855,7 @@ static irqreturn_t tegra_uart_isr(int irq, void *data)
case 4: /* End of data */
case 6: /* Rx timeout */
case 2: /* Receive */
- if (!is_rx_int) {
+ if (!tup->use_rx_pio && !is_rx_int) {
is_rx_int = true;
/* Disable Rx interrupts */
ier = tup->ier_shadow;
@@ -851,6 +865,8 @@ static irqreturn_t tegra_uart_isr(int irq, void *data)
UART_IER_RTOIE | TEGRA_UART_IER_EORD);
tup->ier_shadow = ier;
tegra_uart_write(tup, ier, UART_IER);
+ } else {
+ do_handle_rx_pio(tup);
}
break;
@@ -869,6 +885,7 @@ static irqreturn_t tegra_uart_isr(int irq, void *data)
static void tegra_uart_stop_rx(struct uart_port *u)
{
struct tegra_uart_port *tup = to_tegra_uport(u);
+ struct tty_port *port = &tup->uport.state->port;
struct dma_tx_state state;
unsigned long ier;
@@ -886,9 +903,13 @@ static void tegra_uart_stop_rx(struct uart_port *u)
tup->ier_shadow = ier;
tegra_uart_write(tup, ier, UART_IER);
tup->rx_in_progress = 0;
- dmaengine_terminate_all(tup->rx_dma_chan);
- dmaengine_tx_status(tup->rx_dma_chan, tup->rx_cookie, &state);
- tegra_uart_rx_buffer_push(tup, state.residue);
+ if (tup->rx_dma_chan && !tup->use_rx_pio) {
+ dmaengine_terminate_all(tup->rx_dma_chan);
+ dmaengine_tx_status(tup->rx_dma_chan, tup->rx_cookie, &state);
+ tegra_uart_rx_buffer_push(tup, state.residue);
+ } else {
+ tegra_uart_handle_rx_pio(tup, port);
+ }
}
static void tegra_uart_hw_deinit(struct tegra_uart_port *tup)
@@ -939,8 +960,10 @@ static void tegra_uart_hw_deinit(struct tegra_uart_port *tup)
tup->rx_in_progress = 0;
tup->tx_in_progress = 0;
- tegra_uart_dma_channel_free(tup, true);
- tegra_uart_dma_channel_free(tup, false);
+ if (!tup->use_rx_pio)
+ tegra_uart_dma_channel_free(tup, true);
+ if (!tup->use_tx_pio)
+ tegra_uart_dma_channel_free(tup, false);
clk_disable_unprepare(tup->uart_clk);
}
@@ -985,10 +1008,14 @@ static int tegra_uart_hw_init(struct tegra_uart_port *tup)
*/
tup->fcr_shadow = UART_FCR_ENABLE_FIFO;
- if (tup->cdata->max_dma_burst_bytes == 8)
- tup->fcr_shadow |= UART_FCR_R_TRIG_10;
- else
- tup->fcr_shadow |= UART_FCR_R_TRIG_01;
+ if (tup->use_rx_pio) {
+ tup->fcr_shadow |= UART_FCR_R_TRIG_11;
+ } else {
+ if (tup->cdata->max_dma_burst_bytes == 8)
+ tup->fcr_shadow |= UART_FCR_R_TRIG_10;
+ else
+ tup->fcr_shadow |= UART_FCR_R_TRIG_01;
+ }
tup->fcr_shadow |= TEGRA_UART_TX_TRIG_16B;
tegra_uart_write(tup, tup->fcr_shadow, UART_FCR);
@@ -1016,19 +1043,23 @@ static int tegra_uart_hw_init(struct tegra_uart_port *tup)
* (115200, N, 8, 1) so that the receive DMA buffer may be
* enqueued
*/
- tup->lcr_shadow = TEGRA_UART_DEFAULT_LSR;
ret = tegra_set_baudrate(tup, TEGRA_UART_DEFAULT_BAUD);
if (ret < 0) {
dev_err(tup->uport.dev, "Failed to set baud rate\n");
return ret;
}
- tup->fcr_shadow |= UART_FCR_DMA_SELECT;
- tegra_uart_write(tup, tup->fcr_shadow, UART_FCR);
+ if (!tup->use_rx_pio) {
+ tup->lcr_shadow = TEGRA_UART_DEFAULT_LSR;
+ tup->fcr_shadow |= UART_FCR_DMA_SELECT;
+ tegra_uart_write(tup, tup->fcr_shadow, UART_FCR);
- ret = tegra_uart_start_rx_dma(tup);
- if (ret < 0) {
- dev_err(tup->uport.dev, "Not able to start Rx DMA\n");
- return ret;
+ ret = tegra_uart_start_rx_dma(tup);
+ if (ret < 0) {
+ dev_err(tup->uport.dev, "Not able to start Rx DMA\n");
+ return ret;
+ }
+ } else {
+ tegra_uart_write(tup, tup->fcr_shadow, UART_FCR);
}
tup->rx_in_progress = 1;
@@ -1050,7 +1081,12 @@ static int tegra_uart_hw_init(struct tegra_uart_port *tup)
* both the EORD as well as RX_TIMEOUT - SW sees RX_TIMEOUT first
* then the EORD.
*/
- tup->ier_shadow = UART_IER_RLSI | UART_IER_RTOIE | TEGRA_UART_IER_EORD;
+ if (!tup->use_rx_pio)
+ tup->ier_shadow = UART_IER_RLSI | UART_IER_RTOIE |
+ TEGRA_UART_IER_EORD;
+ else
+ tup->ier_shadow = UART_IER_RLSI | UART_IER_RTOIE | UART_IER_RDI;
+
tegra_uart_write(tup, tup->ier_shadow, UART_IER);
return 0;
}
@@ -1145,16 +1181,22 @@ static int tegra_uart_startup(struct uart_port *u)
struct tegra_uart_port *tup = to_tegra_uport(u);
int ret;
- ret = tegra_uart_dma_channel_allocate(tup, false);
- if (ret < 0) {
- dev_err(u->dev, "Tx Dma allocation failed, err = %d\n", ret);
- return ret;
+ if (!tup->use_tx_pio) {
+ ret = tegra_uart_dma_channel_allocate(tup, false);
+ if (ret < 0) {
+ dev_err(u->dev, "Tx Dma allocation failed, err = %d\n",
+ ret);
+ return ret;
+ }
}
- ret = tegra_uart_dma_channel_allocate(tup, true);
- if (ret < 0) {
- dev_err(u->dev, "Rx Dma allocation failed, err = %d\n", ret);
- goto fail_rx_dma;
+ if (!tup->use_rx_pio) {
+ ret = tegra_uart_dma_channel_allocate(tup, true);
+ if (ret < 0) {
+ dev_err(u->dev, "Rx Dma allocation failed, err = %d\n",
+ ret);
+ goto fail_rx_dma;
+ }
}
ret = tegra_uart_hw_init(tup);
@@ -1172,9 +1214,11 @@ static int tegra_uart_startup(struct uart_port *u)
return 0;
fail_hw_init:
- tegra_uart_dma_channel_free(tup, true);
+ if (!tup->use_rx_pio)
+ tegra_uart_dma_channel_free(tup, true);
fail_rx_dma:
- tegra_uart_dma_channel_free(tup, false);
+ if (!tup->use_tx_pio)
+ tegra_uart_dma_channel_free(tup, false);
return ret;
}
@@ -1378,7 +1422,6 @@ static int tegra_uart_parse_dt(struct platform_device *pdev,
int count;
int n_entries;
-
port = of_alias_get_id(np, "serial");
if (port < 0) {
dev_err(&pdev->dev, "failed to get alias id, errno %d\n", port);
@@ -1388,6 +1431,18 @@ static int tegra_uart_parse_dt(struct platform_device *pdev,
tup->enable_modem_interrupt = of_property_read_bool(np,
"nvidia,enable-modem-interrupt");
+
+ index = of_property_match_string(np, "dma-names", "rx");
+ if (index < 0) {
+ tup->use_rx_pio = true;
+ dev_info(&pdev->dev, "RX in PIO mode\n");
+ }
+ index = of_property_match_string(np, "dma-names", "tx");
+ if (index < 0) {
+ tup->use_tx_pio = true;
+ dev_info(&pdev->dev, "TX in PIO mode\n");
+ }
+
n_entries = of_property_count_u32_elems(np, "nvidia,adjust-baud-rates");
if (n_entries > 0) {
tup->n_adjustable_baud_rates = n_entries / 3;
--
2.7.4
prev parent reply other threads:[~2019-09-04 4:44 UTC|newest]
Thread overview: 13+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-09-04 4:42 [PATCH V2 00/12] serial: tegra: Tegra186 support and fixes Krishna Yarlagadda
2019-09-04 4:42 ` [PATCH V2 01/12] serial: tegra: add support to ignore read Krishna Yarlagadda
2019-09-04 4:42 ` [PATCH V2 02/12] serial: tegra: avoid reg access when clk disabled Krishna Yarlagadda
2019-09-04 4:42 ` [PATCH V2 03/12] serial: tegra: flush the RX fifo on frame error Krishna Yarlagadda
2019-09-04 4:42 ` [PATCH V2 04/12] serial: tegra: report error to upper tty layer Krishna Yarlagadda
2019-09-04 4:43 ` [PATCH V2 05/12] dt-binding: serial: tegra: add new chips Krishna Yarlagadda
2019-09-04 4:43 ` [PATCH V2 06/12] serial: tegra: check for FIFO mode enabled status Krishna Yarlagadda
2019-09-04 4:43 ` [PATCH V2 07/12] serial: tegra: set maximum num of uart ports to 8 Krishna Yarlagadda
2019-09-04 4:43 ` [PATCH V2 08/12] serial: tegra: add support to use 8 bytes trigger Krishna Yarlagadda
2019-09-04 4:43 ` [PATCH V2 09/12] serial: tegra: DT for Adjusted baud rates Krishna Yarlagadda
2019-09-04 4:43 ` [PATCH V2 10/12] serial: tegra: add support to adjust baud rate Krishna Yarlagadda
2019-09-04 4:43 ` [PATCH V2 11/12] serial: tegra: report clk rate errors Krishna Yarlagadda
2019-09-04 4:43 ` Krishna Yarlagadda [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1567572187-29820-13-git-send-email-kyarlagadda@nvidia.com \
--to=kyarlagadda@nvidia.com \
--cc=devicetree@vger.kernel.org \
--cc=gregkh@linuxfoundation.org \
--cc=jonathanh@nvidia.com \
--cc=jslaby@suse.com \
--cc=ldewangan@nvidia.com \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-serial@vger.kernel.org \
--cc=linux-tegra@vger.kernel.org \
--cc=mark.rutland@arm.com \
--cc=robh+dt@kernel.org \
--cc=smohammed@nvidia.com \
--cc=thierry.reding@gmail.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®