[PATCH V1] regulator: qcom-rpmh: Fix PMIC5 BoB min voltage

[PATCH V1] regulator: qcom-rpmh: Fix PMIC5 BoB min voltage

[Kiran Gunda]

Correct the PMIC5 BoB min voltage from 0.3V to 3V. Also correct
the voltage selector accordingly.

Signed-off-by: Kiran Gunda <kgunda@codeaurora.org>
---
Depends-on: This patch depends on "Add regulator support for SC7180"

 drivers/regulator/qcom-rpmh-regulator.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/regulator/qcom-rpmh-regulator.c b/drivers/regulator/qcom-rpmh-regulator.c
index 8ae7ddf..c86ad40 100644
--- a/drivers/regulator/qcom-rpmh-regulator.c
+++ b/drivers/regulator/qcom-rpmh-regulator.c
@@ -735,8 +735,8 @@ static unsigned int rpmh_regulator_pmic4_bob_of_map_mode(unsigned int rpmh_mode)
 static const struct rpmh_vreg_hw_data pmic5_bob = {
 	.regulator_type = VRM,
 	.ops = &rpmh_regulator_vrm_bypass_ops,
-	.voltage_range = REGULATOR_LINEAR_RANGE(300000, 0, 135, 32000),
-	.n_voltages = 136,
+	.voltage_range = REGULATOR_LINEAR_RANGE(3000000, 0, 31, 32000),
+	.n_voltages = 32,
 	.pmic_mode_map = pmic_mode_map_pmic5_bob,
 	.of_map_mode = rpmh_regulator_pmic4_bob_of_map_mode,
 };
-- 
The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum,
 a Linux Foundation Collaborative Project

Applied "regulator: qcom-rpmh: Fix PMIC5 BoB min voltage" to the regulator tree

[Mark Brown]

The patch

   regulator: qcom-rpmh: Fix PMIC5 BoB min voltage

has been applied to the regulator tree at

   https://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator.git for-5.4

All being well this means that it will be integrated into the linux-next
tree (usually sometime in the next 24 hours) and sent to Linus during
the next merge window (or sooner if it is a bug fix), however if
problems are discovered then the patch may be dropped or reverted.  

You may get further e-mails resulting from automated or manual testing
and review of the tree, please engage with people reporting problems and
send followup patches addressing any issues that are reported if needed.

If any updates are required or you are submitting further changes they
should be sent as incremental updates against current git, existing
patches will not be replaced.

Please add any relevant lists and maintainers to the CCs when replying
to this mail.

Thanks,
Mark

From 77fd66c9ff3e992718a79fa6407148935d34b50f Mon Sep 17 00:00:00 2001
From: Kiran Gunda <kgunda@codeaurora.org>
Date: Fri, 4 Oct 2019 15:46:55 +0530
Subject: [PATCH] regulator: qcom-rpmh: Fix PMIC5 BoB min voltage

Correct the PMIC5 BoB min voltage from 0.3V to 3V. Also correct
the voltage selector accordingly.

Signed-off-by: Kiran Gunda <kgunda@codeaurora.org>
Link: https://lore.kernel.org/r/1570184215-5355-1-git-send-email-kgunda@codeaurora.org
Signed-off-by: Mark Brown <broonie@kernel.org>
---
 drivers/regulator/qcom-rpmh-regulator.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/regulator/qcom-rpmh-regulator.c b/drivers/regulator/qcom-rpmh-regulator.c
index db6c085da65e..0246b6f99fb5 100644
--- a/drivers/regulator/qcom-rpmh-regulator.c
+++ b/drivers/regulator/qcom-rpmh-regulator.c
@@ -735,8 +735,8 @@ static const struct rpmh_vreg_hw_data pmic5_hfsmps515 = {
 static const struct rpmh_vreg_hw_data pmic5_bob = {
 	.regulator_type = VRM,
 	.ops = &rpmh_regulator_vrm_bypass_ops,
-	.voltage_range = REGULATOR_LINEAR_RANGE(300000, 0, 135, 32000),
-	.n_voltages = 136,
+	.voltage_range = REGULATOR_LINEAR_RANGE(3000000, 0, 31, 32000),
+	.n_voltages = 32,
 	.pmic_mode_map = pmic_mode_map_pmic5_bob,
 	.of_map_mode = rpmh_regulator_pmic4_bob_of_map_mode,
 };
-- 
2.20.1