* [RESEND][GIT PULL 1/2] soc: TI soc updates for v5.5
@ 2019-10-29 18:14 Santosh Shilimkar
2019-10-29 18:14 ` [RESEND][GIT PULL 2/2] ARM: Keystone platform DTS " Santosh Shilimkar
0 siblings, 1 reply; 2+ messages in thread
From: Santosh Shilimkar @ 2019-10-29 18:14 UTC (permalink / raw)
To: arm, linux-arm-kernel
Cc: khilman, arnd, olof, linux-kernel, santosh.shilimkar
The following changes since commit 54ecb8f7028c5eb3d740bb82b0f1d90f2df63c5c:
Linux 5.4-rc1 (2019-09-30 10:35:40 -0700)
are available in the git repository at:
git://git.kernel.org/pub/scm/linux/kernel/git/ssantosh/linux-keystone.git for_5.5/driver-soc
for you to fetch changes up to faee19ece8263738c147cb0140e0fbc7b5397ca8:
memory: emif: remove set but not used variables 'cs1_used' and 'custom_configs' (2019-10-29 09:57:57 -0700)
----------------------------------------------------------------
Tero Kristo (9):
dt-bindings: omap: add new binding for PRM instances
soc: ti: add initial PRM driver with reset control support
soc: ti: omap-prm: poll for reset complete during de-assert
soc: ti: omap-prm: add support for denying idle for reset clockdomain
soc: ti: omap-prm: add omap4 PRM data
soc: ti: omap-prm: add data for am33xx
soc: ti: omap-prm: add dra7 PRM data
soc: ti: omap-prm: add am4 PRM data
soc: ti: omap-prm: add omap5 PRM data
Wei Yongjun (1):
soc: ti: omap-prm: fix return value check in omap_prm_probe()
YueHaibing (1):
memory: emif: remove set but not used variables 'cs1_used' and 'custom_configs'
.../devicetree/bindings/arm/omap/prm-inst.txt | 29 ++
arch/arm/mach-omap2/Kconfig | 1 +
drivers/memory/emif.c | 5 +-
drivers/soc/ti/Makefile | 1 +
drivers/soc/ti/omap_prm.c | 391 +++++++++++++++++++++
include/linux/platform_data/ti-prm.h | 21 ++
6 files changed, 444 insertions(+), 4 deletions(-)
create mode 100644 Documentation/devicetree/bindings/arm/omap/prm-inst.txt
create mode 100644 drivers/soc/ti/omap_prm.c
create mode 100644 include/linux/platform_data/ti-prm.h
^ permalink raw reply [flat|nested] 2+ messages in thread
* [RESEND][GIT PULL 2/2] ARM: Keystone platform DTS updates for v5.5
2019-10-29 18:14 [RESEND][GIT PULL 1/2] soc: TI soc updates for v5.5 Santosh Shilimkar
@ 2019-10-29 18:14 ` Santosh Shilimkar
0 siblings, 0 replies; 2+ messages in thread
From: Santosh Shilimkar @ 2019-10-29 18:14 UTC (permalink / raw)
To: arm, linux-arm-kernel
Cc: khilman, arnd, olof, linux-kernel, santosh.shilimkar
The following changes since commit 54ecb8f7028c5eb3d740bb82b0f1d90f2df63c5c:
Linux 5.4-rc1 (2019-09-30 10:35:40 -0700)
are available in the git repository at:
git://git.kernel.org/pub/scm/linux/kernel/git/ssantosh/linux-keystone.git for_5.5/keystone-dts
for you to fetch changes up to cfc0e76bbbde6875e026c18ea72f181e5d00d93f:
ARM: configs: keystone: enable cpts (2019-10-07 10:59:10 -0700)
----------------------------------------------------------------
Grygorii Strashko (6):
ARM: dts: keystone-clocks: add input fixed clocks
ARM: dts: k2e-clocks: add input ext. fixed clocks tsipclka/b
ARM: dts: k2e-netcp: add cpts refclk_mux node
ARM: dts: k2hk-netcp: add cpts refclk_mux node
ARM: dts: k2l-netcp: add cpts refclk_mux node
ARM: configs: keystone: enable cpts
arch/arm/boot/dts/keystone-clocks.dtsi | 27 +++++++++++++++++++++++++++
arch/arm/boot/dts/keystone-k2e-clocks.dtsi | 20 ++++++++++++++++++++
arch/arm/boot/dts/keystone-k2e-netcp.dtsi | 21 +++++++++++++++++++--
arch/arm/boot/dts/keystone-k2hk-netcp.dtsi | 20 ++++++++++++++++++--
arch/arm/boot/dts/keystone-k2l-netcp.dtsi | 20 ++++++++++++++++++--
arch/arm/configs/keystone_defconfig | 1 +
6 files changed, 103 insertions(+), 6 deletions(-)
^ permalink raw reply [flat|nested] 2+ messages in thread
end of thread, other threads:[~2019-10-29 18:14 UTC | newest]
Thread overview: 2+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2019-10-29 18:14 [RESEND][GIT PULL 1/2] soc: TI soc updates for v5.5 Santosh Shilimkar
2019-10-29 18:14 ` [RESEND][GIT PULL 2/2] ARM: Keystone platform DTS " Santosh Shilimkar
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®