* [PATCH] firmware: imx: Move i.MX SCU soc driver into SCU firmware driver
@ 2020-06-24 12:11 Anson Huang
2020-06-24 12:33 ` Franck Lenormand
0 siblings, 1 reply; 4+ messages in thread
From: Anson Huang @ 2020-06-24 12:11 UTC (permalink / raw)
To: catalin.marinas, will, shawnguo, s.hauer, kernel, festevam,
bjorn.andersson, leoyang.li, vkoul, geert+renesas, olof,
leonard.crestez, aisheng.dong, peng.fan, franck.lenormand, arnd,
krzk, daniel.baluta, linux-arm-kernel, linux-kernel
Cc: Linux-imx
The i.MX SCU soc driver depends on SCU firmware driver, so it has to
use platform driver model for proper defer probe operation, since
it has no device binding in DT file, a simple platform device is
created together inside the platform driver. To make it more clean,
we can just move the entire SCU soc driver into SCU firmware driver.
Signed-off-by: Anson Huang <Anson.Huang@nxp.com>
---
arch/arm64/configs/defconfig | 1 -
drivers/firmware/imx/imx-scu.c | 127 ++++++++++++++++++++++++++++++
drivers/soc/imx/Kconfig | 9 ---
drivers/soc/imx/Makefile | 1 -
drivers/soc/imx/soc-imx-scu.c | 172 -----------------------------------------
5 files changed, 127 insertions(+), 183 deletions(-)
delete mode 100644 drivers/soc/imx/soc-imx-scu.c
diff --git a/arch/arm64/configs/defconfig b/arch/arm64/configs/defconfig
index ae76fae..35f037f 100644
--- a/arch/arm64/configs/defconfig
+++ b/arch/arm64/configs/defconfig
@@ -854,7 +854,6 @@ CONFIG_OWL_PM_DOMAINS=y
CONFIG_RASPBERRYPI_POWER=y
CONFIG_FSL_DPAA=y
CONFIG_FSL_MC_DPIO=y
-CONFIG_IMX_SCU_SOC=y
CONFIG_QCOM_AOSS_QMP=y
CONFIG_QCOM_GENI_SE=y
CONFIG_QCOM_RMTFS_MEM=m
diff --git a/drivers/firmware/imx/imx-scu.c b/drivers/firmware/imx/imx-scu.c
index 2ab0482..2719487 100644
--- a/drivers/firmware/imx/imx-scu.c
+++ b/drivers/firmware/imx/imx-scu.c
@@ -7,6 +7,7 @@
*
*/
+#include <dt-bindings/firmware/imx/rsrc.h>
#include <linux/err.h>
#include <linux/firmware/imx/ipc.h>
#include <linux/firmware/imx/sci.h>
@@ -18,6 +19,7 @@
#include <linux/mutex.h>
#include <linux/of_platform.h>
#include <linux/platform_device.h>
+#include <linux/sys_soc.h>
#define SCU_MU_CHAN_NUM 8
#define MAX_RX_TIMEOUT (msecs_to_jiffies(30))
@@ -45,6 +47,25 @@ struct imx_sc_ipc {
u8 count;
};
+struct imx_sc_msg_misc_get_soc_id {
+ struct imx_sc_rpc_msg hdr;
+ union {
+ struct {
+ u32 control;
+ u16 resource;
+ } __packed req;
+ struct {
+ u32 id;
+ } resp;
+ } data;
+} __packed __aligned(4);
+
+struct imx_sc_msg_misc_get_soc_uid {
+ struct imx_sc_rpc_msg hdr;
+ u32 uid_low;
+ u32 uid_high;
+} __packed;
+
/*
* This type is used to indicate error response for most functions.
*/
@@ -257,6 +278,108 @@ int imx_scu_call_rpc(struct imx_sc_ipc *sc_ipc, void *msg, bool have_resp)
}
EXPORT_SYMBOL(imx_scu_call_rpc);
+static int imx_scu_soc_uid(u64 *soc_uid)
+{
+ struct imx_sc_msg_misc_get_soc_uid msg;
+ struct imx_sc_rpc_msg *hdr = &msg.hdr;
+ int ret;
+
+ hdr->ver = IMX_SC_RPC_VERSION;
+ hdr->svc = IMX_SC_RPC_SVC_MISC;
+ hdr->func = IMX_SC_MISC_FUNC_UNIQUE_ID;
+ hdr->size = 1;
+
+ ret = imx_scu_call_rpc(imx_sc_ipc_handle, &msg, true);
+ if (ret) {
+ pr_err("%s: get soc uid failed, ret %d\n", __func__, ret);
+ return ret;
+ }
+
+ *soc_uid = msg.uid_high;
+ *soc_uid <<= 32;
+ *soc_uid |= msg.uid_low;
+
+ return 0;
+}
+
+static int imx_scu_soc_id(void)
+{
+ struct imx_sc_msg_misc_get_soc_id msg;
+ struct imx_sc_rpc_msg *hdr = &msg.hdr;
+ int ret;
+
+ hdr->ver = IMX_SC_RPC_VERSION;
+ hdr->svc = IMX_SC_RPC_SVC_MISC;
+ hdr->func = IMX_SC_MISC_FUNC_GET_CONTROL;
+ hdr->size = 3;
+
+ msg.data.req.control = IMX_SC_C_ID;
+ msg.data.req.resource = IMX_SC_R_SYSTEM;
+
+ ret = imx_scu_call_rpc(imx_sc_ipc_handle, &msg, true);
+ if (ret) {
+ pr_err("%s: get soc info failed, ret %d\n", __func__, ret);
+ return ret;
+ }
+
+ return msg.data.resp.id;
+}
+
+static int imx_scu_soc_init(struct device *dev)
+{
+ struct soc_device_attribute *soc_dev_attr;
+ struct soc_device *soc_dev;
+ int id, ret;
+ u64 uid = 0;
+ u32 val;
+
+ soc_dev_attr = devm_kzalloc(dev, sizeof(*soc_dev_attr),
+ GFP_KERNEL);
+ if (!soc_dev_attr)
+ return -ENOMEM;
+
+ soc_dev_attr->family = "Freescale i.MX";
+
+ ret = of_property_read_string(of_root,
+ "model",
+ &soc_dev_attr->machine);
+ if (ret)
+ return ret;
+
+ id = imx_scu_soc_id();
+ if (id < 0)
+ return -EINVAL;
+
+ ret = imx_scu_soc_uid(&uid);
+ if (ret < 0)
+ return -EINVAL;
+
+ /* format soc_id value passed from SCU firmware */
+ val = id & 0x1f;
+ soc_dev_attr->soc_id = devm_kasprintf(dev, GFP_KERNEL, "0x%x", val);
+ if (!soc_dev_attr->soc_id)
+ return -ENOMEM;
+
+ /* format revision value passed from SCU firmware */
+ val = (id >> 5) & 0xf;
+ val = (((val >> 2) + 1) << 4) | (val & 0x3);
+ soc_dev_attr->revision = devm_kasprintf(dev, GFP_KERNEL, "%d.%d",
+ (val >> 4) & 0xf, val & 0xf);
+ if (!soc_dev_attr->revision)
+ return -ENOMEM;
+
+ soc_dev_attr->serial_number = devm_kasprintf(dev, GFP_KERNEL,
+ "%016llX", uid);
+ if (!soc_dev_attr->serial_number)
+ return -ENOMEM;
+
+ soc_dev = soc_device_register(soc_dev_attr);
+ if (IS_ERR(soc_dev))
+ return PTR_ERR(soc_dev);
+
+ return 0;
+}
+
static int imx_scu_probe(struct platform_device *pdev)
{
struct device *dev = &pdev->dev;
@@ -328,6 +451,10 @@ static int imx_scu_probe(struct platform_device *pdev)
imx_sc_ipc_handle = sc_ipc;
+ ret = imx_scu_soc_init(dev);
+ if (ret)
+ dev_warn(dev, "failed to initialize SoC info: %d\n", ret);
+
ret = imx_scu_enable_general_irq_channel(dev);
if (ret)
dev_warn(dev,
diff --git a/drivers/soc/imx/Kconfig b/drivers/soc/imx/Kconfig
index d515d2c..d49fa63 100644
--- a/drivers/soc/imx/Kconfig
+++ b/drivers/soc/imx/Kconfig
@@ -8,15 +8,6 @@ config IMX_GPCV2_PM_DOMAINS
select PM_GENERIC_DOMAINS
default y if SOC_IMX7D
-config IMX_SCU_SOC
- bool "i.MX System Controller Unit SoC info support"
- depends on IMX_SCU
- select SOC_BUS
- help
- If you say yes here you get support for the NXP i.MX System
- Controller Unit SoC info module, it will provide the SoC info
- like SoC family, ID and revision etc.
-
config SOC_IMX8M
bool "i.MX8M SoC family support"
depends on ARCH_MXC || COMPILE_TEST
diff --git a/drivers/soc/imx/Makefile b/drivers/soc/imx/Makefile
index 4461432..078dc91 100644
--- a/drivers/soc/imx/Makefile
+++ b/drivers/soc/imx/Makefile
@@ -5,4 +5,3 @@ endif
obj-$(CONFIG_HAVE_IMX_GPC) += gpc.o
obj-$(CONFIG_IMX_GPCV2_PM_DOMAINS) += gpcv2.o
obj-$(CONFIG_SOC_IMX8M) += soc-imx8m.o
-obj-$(CONFIG_IMX_SCU_SOC) += soc-imx-scu.o
diff --git a/drivers/soc/imx/soc-imx-scu.c b/drivers/soc/imx/soc-imx-scu.c
deleted file mode 100644
index 92448ca..0000000
--- a/drivers/soc/imx/soc-imx-scu.c
+++ /dev/null
@@ -1,172 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * Copyright 2019 NXP.
- */
-
-#include <dt-bindings/firmware/imx/rsrc.h>
-#include <linux/firmware/imx/sci.h>
-#include <linux/slab.h>
-#include <linux/sys_soc.h>
-#include <linux/platform_device.h>
-#include <linux/of.h>
-
-#define IMX_SCU_SOC_DRIVER_NAME "imx-scu-soc"
-
-static struct imx_sc_ipc *soc_ipc_handle;
-
-struct imx_sc_msg_misc_get_soc_id {
- struct imx_sc_rpc_msg hdr;
- union {
- struct {
- u32 control;
- u16 resource;
- } __packed req;
- struct {
- u32 id;
- } resp;
- } data;
-} __packed __aligned(4);
-
-struct imx_sc_msg_misc_get_soc_uid {
- struct imx_sc_rpc_msg hdr;
- u32 uid_low;
- u32 uid_high;
-} __packed;
-
-static int imx_scu_soc_uid(u64 *soc_uid)
-{
- struct imx_sc_msg_misc_get_soc_uid msg;
- struct imx_sc_rpc_msg *hdr = &msg.hdr;
- int ret;
-
- hdr->ver = IMX_SC_RPC_VERSION;
- hdr->svc = IMX_SC_RPC_SVC_MISC;
- hdr->func = IMX_SC_MISC_FUNC_UNIQUE_ID;
- hdr->size = 1;
-
- ret = imx_scu_call_rpc(soc_ipc_handle, &msg, true);
- if (ret) {
- pr_err("%s: get soc uid failed, ret %d\n", __func__, ret);
- return ret;
- }
-
- *soc_uid = msg.uid_high;
- *soc_uid <<= 32;
- *soc_uid |= msg.uid_low;
-
- return 0;
-}
-
-static int imx_scu_soc_id(void)
-{
- struct imx_sc_msg_misc_get_soc_id msg;
- struct imx_sc_rpc_msg *hdr = &msg.hdr;
- int ret;
-
- hdr->ver = IMX_SC_RPC_VERSION;
- hdr->svc = IMX_SC_RPC_SVC_MISC;
- hdr->func = IMX_SC_MISC_FUNC_GET_CONTROL;
- hdr->size = 3;
-
- msg.data.req.control = IMX_SC_C_ID;
- msg.data.req.resource = IMX_SC_R_SYSTEM;
-
- ret = imx_scu_call_rpc(soc_ipc_handle, &msg, true);
- if (ret) {
- pr_err("%s: get soc info failed, ret %d\n", __func__, ret);
- return ret;
- }
-
- return msg.data.resp.id;
-}
-
-static int imx_scu_soc_probe(struct platform_device *pdev)
-{
- struct soc_device_attribute *soc_dev_attr;
- struct soc_device *soc_dev;
- int id, ret;
- u64 uid = 0;
- u32 val;
-
- ret = imx_scu_get_handle(&soc_ipc_handle);
- if (ret)
- return ret;
-
- soc_dev_attr = devm_kzalloc(&pdev->dev, sizeof(*soc_dev_attr),
- GFP_KERNEL);
- if (!soc_dev_attr)
- return -ENOMEM;
-
- soc_dev_attr->family = "Freescale i.MX";
-
- ret = of_property_read_string(of_root,
- "model",
- &soc_dev_attr->machine);
- if (ret)
- return ret;
-
- id = imx_scu_soc_id();
- if (id < 0)
- return -EINVAL;
-
- ret = imx_scu_soc_uid(&uid);
- if (ret < 0)
- return -EINVAL;
-
- /* format soc_id value passed from SCU firmware */
- val = id & 0x1f;
- soc_dev_attr->soc_id = devm_kasprintf(&pdev->dev, GFP_KERNEL, "0x%x", val);
- if (!soc_dev_attr->soc_id)
- return -ENOMEM;
-
- /* format revision value passed from SCU firmware */
- val = (id >> 5) & 0xf;
- val = (((val >> 2) + 1) << 4) | (val & 0x3);
- soc_dev_attr->revision = devm_kasprintf(&pdev->dev, GFP_KERNEL, "%d.%d",
- (val >> 4) & 0xf, val & 0xf);
- if (!soc_dev_attr->revision)
- return -ENOMEM;
-
- soc_dev_attr->serial_number = devm_kasprintf(&pdev->dev, GFP_KERNEL,
- "%016llX", uid);
- if (!soc_dev_attr->serial_number)
- return -ENOMEM;
-
- soc_dev = soc_device_register(soc_dev_attr);
- if (IS_ERR(soc_dev))
- return PTR_ERR(soc_dev);
-
- return 0;
-}
-
-static struct platform_driver imx_scu_soc_driver = {
- .driver = {
- .name = IMX_SCU_SOC_DRIVER_NAME,
- },
- .probe = imx_scu_soc_probe,
-};
-
-static int __init imx_scu_soc_init(void)
-{
- struct platform_device *pdev;
- struct device_node *np;
- int ret;
-
- np = of_find_compatible_node(NULL, NULL, "fsl,imx-scu");
- if (!np)
- return -ENODEV;
-
- of_node_put(np);
-
- ret = platform_driver_register(&imx_scu_soc_driver);
- if (ret)
- return ret;
-
- pdev = platform_device_register_simple(IMX_SCU_SOC_DRIVER_NAME,
- -1, NULL, 0);
- if (IS_ERR(pdev))
- platform_driver_unregister(&imx_scu_soc_driver);
-
- return PTR_ERR_OR_ZERO(pdev);
-}
-device_initcall(imx_scu_soc_init);
--
2.7.4
^ permalink raw reply [flat|nested] 4+ messages in thread* RE: [PATCH] firmware: imx: Move i.MX SCU soc driver into SCU firmware driver
2020-06-24 12:11 [PATCH] firmware: imx: Move i.MX SCU soc driver into SCU firmware driver Anson Huang
@ 2020-06-24 12:33 ` Franck Lenormand
2020-06-24 13:15 ` Anson Huang
0 siblings, 1 reply; 4+ messages in thread
From: Franck Lenormand @ 2020-06-24 12:33 UTC (permalink / raw)
To: Anson Huang, catalin.marinas, will, shawnguo, s.hauer, kernel,
festevam, bjorn.andersson, Leo Li, vkoul, geert+renesas, olof,
Leonard Crestez, Aisheng Dong, Peng Fan, arnd, krzk,
Daniel Baluta, linux-arm-kernel, linux-kernel
Cc: dl-linux-imx
Hello,
The move of folder is a good idea however I do not feel adding the code of soc-imx-scu.c to imx-scu.c is the best.
Until now imx-scu.c was focused on exchanging the RPC and init the IRQ.
Why not have soc-imx-scu.c copied to imx-scu-soc.c (change filename) to have a pattern similar to imx-scu-irq? And keep the imx_scu_soc_init into imx-scu.c.
Regards,
Franck LENORMAND, STEC Engineer
-----Original Message-----
From: Anson Huang <Anson.Huang@nxp.com>
Sent: Wednesday, June 24, 2020 2:11 PM
To: catalin.marinas@arm.com; will@kernel.org; shawnguo@kernel.org; s.hauer@pengutronix.de; kernel@pengutronix.de; festevam@gmail.com; bjorn.andersson@linaro.org; Leo Li <leoyang.li@nxp.com>; vkoul@kernel.org; geert+renesas@glider.be; olof@lixom.net; Leonard Crestez <leonard.crestez@nxp.com>; Aisheng Dong <aisheng.dong@nxp.com>; Peng Fan <peng.fan@nxp.com>; Franck Lenormand <franck.lenormand@nxp.com>; arnd@arndb.de; krzk@kernel.org; Daniel Baluta <daniel.baluta@nxp.com>; linux-arm-kernel@lists.infradead.org; linux-kernel@vger.kernel.org
Cc: dl-linux-imx <linux-imx@nxp.com>
Subject: [PATCH] firmware: imx: Move i.MX SCU soc driver into SCU firmware driver
The i.MX SCU soc driver depends on SCU firmware driver, so it has to use platform driver model for proper defer probe operation, since it has no device binding in DT file, a simple platform device is created together inside the platform driver. To make it more clean, we can just move the entire SCU soc driver into SCU firmware driver.
Signed-off-by: Anson Huang <Anson.Huang@nxp.com>
---
arch/arm64/configs/defconfig | 1 -
drivers/firmware/imx/imx-scu.c | 127 ++++++++++++++++++++++++++++++
drivers/soc/imx/Kconfig | 9 ---
drivers/soc/imx/Makefile | 1 -
drivers/soc/imx/soc-imx-scu.c | 172 -----------------------------------------
5 files changed, 127 insertions(+), 183 deletions(-) delete mode 100644 drivers/soc/imx/soc-imx-scu.c
diff --git a/arch/arm64/configs/defconfig b/arch/arm64/configs/defconfig index ae76fae..35f037f 100644
--- a/arch/arm64/configs/defconfig
+++ b/arch/arm64/configs/defconfig
@@ -854,7 +854,6 @@ CONFIG_OWL_PM_DOMAINS=y CONFIG_RASPBERRYPI_POWER=y CONFIG_FSL_DPAA=y CONFIG_FSL_MC_DPIO=y -CONFIG_IMX_SCU_SOC=y CONFIG_QCOM_AOSS_QMP=y CONFIG_QCOM_GENI_SE=y CONFIG_QCOM_RMTFS_MEM=m diff --git a/drivers/firmware/imx/imx-scu.c b/drivers/firmware/imx/imx-scu.c index 2ab0482..2719487 100644
--- a/drivers/firmware/imx/imx-scu.c
+++ b/drivers/firmware/imx/imx-scu.c
@@ -7,6 +7,7 @@
*
*/
+#include <dt-bindings/firmware/imx/rsrc.h>
#include <linux/err.h>
#include <linux/firmware/imx/ipc.h>
#include <linux/firmware/imx/sci.h>
@@ -18,6 +19,7 @@
#include <linux/mutex.h>
#include <linux/of_platform.h>
#include <linux/platform_device.h>
+#include <linux/sys_soc.h>
#define SCU_MU_CHAN_NUM 8
#define MAX_RX_TIMEOUT (msecs_to_jiffies(30))
@@ -45,6 +47,25 @@ struct imx_sc_ipc {
u8 count;
};
+struct imx_sc_msg_misc_get_soc_id {
+ struct imx_sc_rpc_msg hdr;
+ union {
+ struct {
+ u32 control;
+ u16 resource;
+ } __packed req;
+ struct {
+ u32 id;
+ } resp;
+ } data;
+} __packed __aligned(4);
+
+struct imx_sc_msg_misc_get_soc_uid {
+ struct imx_sc_rpc_msg hdr;
+ u32 uid_low;
+ u32 uid_high;
+} __packed;
+
/*
* This type is used to indicate error response for most functions.
*/
@@ -257,6 +278,108 @@ int imx_scu_call_rpc(struct imx_sc_ipc *sc_ipc, void *msg, bool have_resp) } EXPORT_SYMBOL(imx_scu_call_rpc);
+static int imx_scu_soc_uid(u64 *soc_uid) {
+ struct imx_sc_msg_misc_get_soc_uid msg;
+ struct imx_sc_rpc_msg *hdr = &msg.hdr;
+ int ret;
+
+ hdr->ver = IMX_SC_RPC_VERSION;
+ hdr->svc = IMX_SC_RPC_SVC_MISC;
+ hdr->func = IMX_SC_MISC_FUNC_UNIQUE_ID;
+ hdr->size = 1;
+
+ ret = imx_scu_call_rpc(imx_sc_ipc_handle, &msg, true);
+ if (ret) {
+ pr_err("%s: get soc uid failed, ret %d\n", __func__, ret);
+ return ret;
+ }
+
+ *soc_uid = msg.uid_high;
+ *soc_uid <<= 32;
+ *soc_uid |= msg.uid_low;
+
+ return 0;
+}
+
+static int imx_scu_soc_id(void)
+{
+ struct imx_sc_msg_misc_get_soc_id msg;
+ struct imx_sc_rpc_msg *hdr = &msg.hdr;
+ int ret;
+
+ hdr->ver = IMX_SC_RPC_VERSION;
+ hdr->svc = IMX_SC_RPC_SVC_MISC;
+ hdr->func = IMX_SC_MISC_FUNC_GET_CONTROL;
+ hdr->size = 3;
+
+ msg.data.req.control = IMX_SC_C_ID;
+ msg.data.req.resource = IMX_SC_R_SYSTEM;
+
+ ret = imx_scu_call_rpc(imx_sc_ipc_handle, &msg, true);
+ if (ret) {
+ pr_err("%s: get soc info failed, ret %d\n", __func__, ret);
+ return ret;
+ }
+
+ return msg.data.resp.id;
+}
+
+static int imx_scu_soc_init(struct device *dev) {
+ struct soc_device_attribute *soc_dev_attr;
+ struct soc_device *soc_dev;
+ int id, ret;
+ u64 uid = 0;
+ u32 val;
+
+ soc_dev_attr = devm_kzalloc(dev, sizeof(*soc_dev_attr),
+ GFP_KERNEL);
+ if (!soc_dev_attr)
+ return -ENOMEM;
+
+ soc_dev_attr->family = "Freescale i.MX";
+
+ ret = of_property_read_string(of_root,
+ "model",
+ &soc_dev_attr->machine);
+ if (ret)
+ return ret;
+
+ id = imx_scu_soc_id();
+ if (id < 0)
+ return -EINVAL;
+
+ ret = imx_scu_soc_uid(&uid);
+ if (ret < 0)
+ return -EINVAL;
+
+ /* format soc_id value passed from SCU firmware */
+ val = id & 0x1f;
+ soc_dev_attr->soc_id = devm_kasprintf(dev, GFP_KERNEL, "0x%x", val);
+ if (!soc_dev_attr->soc_id)
+ return -ENOMEM;
+
+ /* format revision value passed from SCU firmware */
+ val = (id >> 5) & 0xf;
+ val = (((val >> 2) + 1) << 4) | (val & 0x3);
+ soc_dev_attr->revision = devm_kasprintf(dev, GFP_KERNEL, "%d.%d",
+ (val >> 4) & 0xf, val & 0xf);
+ if (!soc_dev_attr->revision)
+ return -ENOMEM;
+
+ soc_dev_attr->serial_number = devm_kasprintf(dev, GFP_KERNEL,
+ "%016llX", uid);
+ if (!soc_dev_attr->serial_number)
+ return -ENOMEM;
+
+ soc_dev = soc_device_register(soc_dev_attr);
+ if (IS_ERR(soc_dev))
+ return PTR_ERR(soc_dev);
+
+ return 0;
+}
+
static int imx_scu_probe(struct platform_device *pdev) {
struct device *dev = &pdev->dev;
@@ -328,6 +451,10 @@ static int imx_scu_probe(struct platform_device *pdev)
imx_sc_ipc_handle = sc_ipc;
+ ret = imx_scu_soc_init(dev);
+ if (ret)
+ dev_warn(dev, "failed to initialize SoC info: %d\n", ret);
+
ret = imx_scu_enable_general_irq_channel(dev);
if (ret)
dev_warn(dev,
diff --git a/drivers/soc/imx/Kconfig b/drivers/soc/imx/Kconfig index d515d2c..d49fa63 100644
--- a/drivers/soc/imx/Kconfig
+++ b/drivers/soc/imx/Kconfig
@@ -8,15 +8,6 @@ config IMX_GPCV2_PM_DOMAINS
select PM_GENERIC_DOMAINS
default y if SOC_IMX7D
-config IMX_SCU_SOC
- bool "i.MX System Controller Unit SoC info support"
- depends on IMX_SCU
- select SOC_BUS
- help
- If you say yes here you get support for the NXP i.MX System
- Controller Unit SoC info module, it will provide the SoC info
- like SoC family, ID and revision etc.
-
config SOC_IMX8M
bool "i.MX8M SoC family support"
depends on ARCH_MXC || COMPILE_TEST
diff --git a/drivers/soc/imx/Makefile b/drivers/soc/imx/Makefile index 4461432..078dc91 100644
--- a/drivers/soc/imx/Makefile
+++ b/drivers/soc/imx/Makefile
@@ -5,4 +5,3 @@ endif
obj-$(CONFIG_HAVE_IMX_GPC) += gpc.o
obj-$(CONFIG_IMX_GPCV2_PM_DOMAINS) += gpcv2.o
obj-$(CONFIG_SOC_IMX8M) += soc-imx8m.o
-obj-$(CONFIG_IMX_SCU_SOC) += soc-imx-scu.o diff --git a/drivers/soc/imx/soc-imx-scu.c b/drivers/soc/imx/soc-imx-scu.c deleted file mode 100644 index 92448ca..0000000
--- a/drivers/soc/imx/soc-imx-scu.c
+++ /dev/null
@@ -1,172 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * Copyright 2019 NXP.
- */
-
-#include <dt-bindings/firmware/imx/rsrc.h> -#include <linux/firmware/imx/sci.h> -#include <linux/slab.h> -#include <linux/sys_soc.h> -#include <linux/platform_device.h> -#include <linux/of.h>
-
-#define IMX_SCU_SOC_DRIVER_NAME "imx-scu-soc"
-
-static struct imx_sc_ipc *soc_ipc_handle;
-
-struct imx_sc_msg_misc_get_soc_id {
- struct imx_sc_rpc_msg hdr;
- union {
- struct {
- u32 control;
- u16 resource;
- } __packed req;
- struct {
- u32 id;
- } resp;
- } data;
-} __packed __aligned(4);
-
-struct imx_sc_msg_misc_get_soc_uid {
- struct imx_sc_rpc_msg hdr;
- u32 uid_low;
- u32 uid_high;
-} __packed;
-
-static int imx_scu_soc_uid(u64 *soc_uid) -{
- struct imx_sc_msg_misc_get_soc_uid msg;
- struct imx_sc_rpc_msg *hdr = &msg.hdr;
- int ret;
-
- hdr->ver = IMX_SC_RPC_VERSION;
- hdr->svc = IMX_SC_RPC_SVC_MISC;
- hdr->func = IMX_SC_MISC_FUNC_UNIQUE_ID;
- hdr->size = 1;
-
- ret = imx_scu_call_rpc(soc_ipc_handle, &msg, true);
- if (ret) {
- pr_err("%s: get soc uid failed, ret %d\n", __func__, ret);
- return ret;
- }
-
- *soc_uid = msg.uid_high;
- *soc_uid <<= 32;
- *soc_uid |= msg.uid_low;
-
- return 0;
-}
-
-static int imx_scu_soc_id(void)
-{
- struct imx_sc_msg_misc_get_soc_id msg;
- struct imx_sc_rpc_msg *hdr = &msg.hdr;
- int ret;
-
- hdr->ver = IMX_SC_RPC_VERSION;
- hdr->svc = IMX_SC_RPC_SVC_MISC;
- hdr->func = IMX_SC_MISC_FUNC_GET_CONTROL;
- hdr->size = 3;
-
- msg.data.req.control = IMX_SC_C_ID;
- msg.data.req.resource = IMX_SC_R_SYSTEM;
-
- ret = imx_scu_call_rpc(soc_ipc_handle, &msg, true);
- if (ret) {
- pr_err("%s: get soc info failed, ret %d\n", __func__, ret);
- return ret;
- }
-
- return msg.data.resp.id;
-}
-
-static int imx_scu_soc_probe(struct platform_device *pdev) -{
- struct soc_device_attribute *soc_dev_attr;
- struct soc_device *soc_dev;
- int id, ret;
- u64 uid = 0;
- u32 val;
-
- ret = imx_scu_get_handle(&soc_ipc_handle);
- if (ret)
- return ret;
-
- soc_dev_attr = devm_kzalloc(&pdev->dev, sizeof(*soc_dev_attr),
- GFP_KERNEL);
- if (!soc_dev_attr)
- return -ENOMEM;
-
- soc_dev_attr->family = "Freescale i.MX";
-
- ret = of_property_read_string(of_root,
- "model",
- &soc_dev_attr->machine);
- if (ret)
- return ret;
-
- id = imx_scu_soc_id();
- if (id < 0)
- return -EINVAL;
-
- ret = imx_scu_soc_uid(&uid);
- if (ret < 0)
- return -EINVAL;
-
- /* format soc_id value passed from SCU firmware */
- val = id & 0x1f;
- soc_dev_attr->soc_id = devm_kasprintf(&pdev->dev, GFP_KERNEL, "0x%x", val);
- if (!soc_dev_attr->soc_id)
- return -ENOMEM;
-
- /* format revision value passed from SCU firmware */
- val = (id >> 5) & 0xf;
- val = (((val >> 2) + 1) << 4) | (val & 0x3);
- soc_dev_attr->revision = devm_kasprintf(&pdev->dev, GFP_KERNEL, "%d.%d",
- (val >> 4) & 0xf, val & 0xf);
- if (!soc_dev_attr->revision)
- return -ENOMEM;
-
- soc_dev_attr->serial_number = devm_kasprintf(&pdev->dev, GFP_KERNEL,
- "%016llX", uid);
- if (!soc_dev_attr->serial_number)
- return -ENOMEM;
-
- soc_dev = soc_device_register(soc_dev_attr);
- if (IS_ERR(soc_dev))
- return PTR_ERR(soc_dev);
-
- return 0;
-}
-
-static struct platform_driver imx_scu_soc_driver = {
- .driver = {
- .name = IMX_SCU_SOC_DRIVER_NAME,
- },
- .probe = imx_scu_soc_probe,
-};
-
-static int __init imx_scu_soc_init(void) -{
- struct platform_device *pdev;
- struct device_node *np;
- int ret;
-
- np = of_find_compatible_node(NULL, NULL, "fsl,imx-scu");
- if (!np)
- return -ENODEV;
-
- of_node_put(np);
-
- ret = platform_driver_register(&imx_scu_soc_driver);
- if (ret)
- return ret;
-
- pdev = platform_device_register_simple(IMX_SCU_SOC_DRIVER_NAME,
- -1, NULL, 0);
- if (IS_ERR(pdev))
- platform_driver_unregister(&imx_scu_soc_driver);
-
- return PTR_ERR_OR_ZERO(pdev);
-}
-device_initcall(imx_scu_soc_init);
--
2.7.4
^ permalink raw reply [flat|nested] 4+ messages in thread* RE: [PATCH] firmware: imx: Move i.MX SCU soc driver into SCU firmware driver
2020-06-24 12:33 ` Franck Lenormand
@ 2020-06-24 13:15 ` Anson Huang
2020-06-24 13:59 ` Arnd Bergmann
0 siblings, 1 reply; 4+ messages in thread
From: Anson Huang @ 2020-06-24 13:15 UTC (permalink / raw)
To: Franck Lenormand, catalin.marinas, will, shawnguo, s.hauer,
kernel, festevam, bjorn.andersson, Leo Li, vkoul, geert+renesas,
olof, Leonard Crestez, Aisheng Dong, Peng Fan, arnd, krzk,
Daniel Baluta, linux-arm-kernel, linux-kernel
Cc: dl-linux-imx
Hi, Franck/Arnd
> Subject: RE: [PATCH] firmware: imx: Move i.MX SCU soc driver into SCU
> firmware driver
>
> Hello,
>
> The move of folder is a good idea however I do not feel adding the code of
> soc-imx-scu.c to imx-scu.c is the best.
> Until now imx-scu.c was focused on exchanging the RPC and init the IRQ.
> Why not have soc-imx-scu.c copied to imx-scu-soc.c (change filename) to
> have a pattern similar to imx-scu-irq? And keep the imx_scu_soc_init into
> imx-scu.c.
>
Sound like making sense to me, it can make the code architecture more clear.
Hi, Arnd
What do you think?
Thanks,
Anson
^ permalink raw reply [flat|nested] 4+ messages in thread
* Re: [PATCH] firmware: imx: Move i.MX SCU soc driver into SCU firmware driver
2020-06-24 13:15 ` Anson Huang
@ 2020-06-24 13:59 ` Arnd Bergmann
0 siblings, 0 replies; 4+ messages in thread
From: Arnd Bergmann @ 2020-06-24 13:59 UTC (permalink / raw)
To: Anson Huang
Cc: Franck Lenormand, catalin.marinas, will, shawnguo, s.hauer,
kernel, festevam, bjorn.andersson, Leo Li, vkoul, geert+renesas,
olof, Leonard Crestez, Aisheng Dong, Peng Fan, krzk,
Daniel Baluta, linux-arm-kernel, linux-kernel, dl-linux-imx
On Wed, Jun 24, 2020 at 3:15 PM Anson Huang <anson.huang@nxp.com> wrote:
>
> Hi, Franck/Arnd
>
> > Subject: RE: [PATCH] firmware: imx: Move i.MX SCU soc driver into SCU
> > firmware driver
> >
> > Hello,
> >
> > The move of folder is a good idea however I do not feel adding the code of
> > soc-imx-scu.c to imx-scu.c is the best.
> > Until now imx-scu.c was focused on exchanging the RPC and init the IRQ.
> > Why not have soc-imx-scu.c copied to imx-scu-soc.c (change filename) to
> > have a pattern similar to imx-scu-irq? And keep the imx_scu_soc_init into
> > imx-scu.c.
> >
> Sound like making sense to me, it can make the code architecture more clear.
>
> What do you think?
Yes, I agree that is a good idea.
Arnd
^ permalink raw reply [flat|nested] 4+ messages in thread
end of thread, other threads:[~2020-06-24 14:00 UTC | newest]
Thread overview: 4+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2020-06-24 12:11 [PATCH] firmware: imx: Move i.MX SCU soc driver into SCU firmware driver Anson Huang
2020-06-24 12:33 ` Franck Lenormand
2020-06-24 13:15 ` Anson Huang
2020-06-24 13:59 ` Arnd Bergmann
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®