From: Zhang Changzhong <zhangchangzhong@huawei.com>
To: <robin@protonic.nl>, <linux@rempel-privat.de>,
<kernel@pengutronix.de>, <socketcan@hartkopp.net>,
<mkl@pengutronix.de>, <davem@davemloft.net>, <kuba@kernel.org>
Cc: <linux-can@vger.kernel.org>, <netdev@vger.kernel.org>,
<linux-kernel@vger.kernel.org>
Subject: [PATCH net 4/4] can: j1939: add rxtimer for multipacket broadcast session
Date: Wed, 5 Aug 2020 11:50:25 +0800 [thread overview]
Message-ID: <1596599425-5534-5-git-send-email-zhangchangzhong@huawei.com> (raw)
In-Reply-To: <1596599425-5534-1-git-send-email-zhangchangzhong@huawei.com>
According to SAE J1939/21 (Chapter 5.12.3 and APPENDIX C), for transmit
side the required time interval between packets of a multipacket
broadcast message is 50 to 200 ms, the responder shall use a timeout of
250ms (provides margin allowing for the maximumm spacing of 200ms). For
receive side a timeout will occur when a time of greater than 750 ms
elapsed between two message packets when more packets were expected.
So this patch fix and add rxtimer for multipacket broadcast session.
Fixes: 9d71dd0c7009 ("can: add support of SAE J1939 protocol")
Signed-off-by: Zhang Changzhong <zhangchangzhong@huawei.com>
---
net/can/j1939/transport.c | 28 ++++++++++++++++++++--------
1 file changed, 20 insertions(+), 8 deletions(-)
diff --git a/net/can/j1939/transport.c b/net/can/j1939/transport.c
index 5757f9f..fad210e 100644
--- a/net/can/j1939/transport.c
+++ b/net/can/j1939/transport.c
@@ -716,10 +716,12 @@ static int j1939_session_tx_rts(struct j1939_session *session)
return ret;
session->last_txcmd = dat[0];
- if (dat[0] == J1939_TP_CMD_BAM)
+ if (dat[0] == J1939_TP_CMD_BAM) {
j1939_tp_schedule_txtimer(session, 50);
-
- j1939_tp_set_rxtimeout(session, 1250);
+ j1939_tp_set_rxtimeout(session, 250);
+ } else {
+ j1939_tp_set_rxtimeout(session, 1250);
+ }
netdev_dbg(session->priv->ndev, "%s: 0x%p\n", __func__, session);
@@ -1665,11 +1667,15 @@ static void j1939_xtp_rx_rts(struct j1939_priv *priv, struct sk_buff *skb,
}
session->last_cmd = cmd;
- j1939_tp_set_rxtimeout(session, 1250);
-
- if (cmd != J1939_TP_CMD_BAM && !session->transmission) {
- j1939_session_txtimer_cancel(session);
- j1939_tp_schedule_txtimer(session, 0);
+ if (cmd == J1939_TP_CMD_BAM) {
+ if (!session->transmission)
+ j1939_tp_set_rxtimeout(session, 750);
+ } else {
+ if (!session->transmission) {
+ j1939_session_txtimer_cancel(session);
+ j1939_tp_schedule_txtimer(session, 0);
+ }
+ j1939_tp_set_rxtimeout(session, 1250);
}
j1939_session_put(session);
@@ -1720,6 +1726,7 @@ static void j1939_xtp_rx_dat_one(struct j1939_session *session,
int offset;
int nbytes;
bool final = false;
+ bool remain = false;
bool do_cts_eoma = false;
int packet;
@@ -1781,6 +1788,8 @@ static void j1939_xtp_rx_dat_one(struct j1939_session *session,
j1939_cb_is_broadcast(&session->skcb)) {
if (session->pkt.rx >= session->pkt.total)
final = true;
+ else
+ remain = true;
} else {
/* never final, an EOMA must follow */
if (session->pkt.rx >= session->pkt.last)
@@ -1790,6 +1799,9 @@ static void j1939_xtp_rx_dat_one(struct j1939_session *session,
if (final) {
j1939_session_timers_cancel(session);
j1939_session_completed(session);
+ } else if (remain) {
+ if (!session->transmission)
+ j1939_tp_set_rxtimeout(session, 750);
} else if (do_cts_eoma) {
j1939_tp_set_rxtimeout(session, 1250);
if (!session->transmission)
--
2.9.5
next prev parent reply other threads:[~2020-08-05 3:51 UTC|newest]
Thread overview: 9+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-08-05 3:50 [PATCH net 0/4] support multipacket broadcast message Zhang Changzhong
2020-08-05 3:50 ` [PATCH net 1/4] can: j1939: fix support for " Zhang Changzhong
2020-08-05 3:50 ` [PATCH net 2/4] can: j1939: cancel rxtimer on multipacket broadcast session complete Zhang Changzhong
2020-08-05 3:50 ` [PATCH net 3/4] can: j1939: abort multipacket broadcast session when timeout occurs Zhang Changzhong
2020-08-05 3:50 ` Zhang Changzhong [this message]
2020-08-06 16:10 ` [PATCH net 0/4] support multipacket broadcast message Oleksij Rempel
2020-08-07 9:36 ` Zhang Changzhong
2020-08-07 13:15 ` Oleksij Rempel
2020-08-14 11:01 ` Oleksij Rempel
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1596599425-5534-5-git-send-email-zhangchangzhong@huawei.com \
--to=zhangchangzhong@huawei.com \
--cc=davem@davemloft.net \
--cc=kernel@pengutronix.de \
--cc=kuba@kernel.org \
--cc=linux-can@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux@rempel-privat.de \
--cc=mkl@pengutronix.de \
--cc=netdev@vger.kernel.org \
--cc=robin@protonic.nl \
--cc=socketcan@hartkopp.net \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®