From: Chaoyi Chen <chaoyi.chen@rock-chips.com>
To: Sebastian Reichel <sebastian.reichel@collabora.com>,
Andrew Lunn <andrew@lunn.ch>
Cc: Chaoyi Chen <kernel@airkyi.com>, Rob Herring <robh@kernel.org>,
Krzysztof Kozlowski <krzk+dt@kernel.org>,
Conor Dooley <conor+dt@kernel.org>,
Heiko Stuebner <heiko@sntech.de>,
Alexey Charkov <alchark@gmail.com>,
Shawn Lin <shawn.lin@rock-chips.com>,
Andy Yan <andy.yan@rock-chips.com>,
Nicolas Frattaroli <nicolas.frattaroli@collabora.com>,
Detlev Casanova <detlev.casanova@collabora.com>,
Stephen Chen <stephen@radxa.com>,
devicetree@vger.kernel.org, linux-arm-kernel@lists.infradead.org,
linux-rockchip@lists.infradead.org, linux-kernel@vger.kernel.org
Subject: Re: [PATCH 0/3] arm64: dts: rockchip: Change gmac phy-mode to rgmii-id for rk3576 board
Date: Wed, 21 Jan 2026 14:54:25 +0800 [thread overview]
Message-ID: <15a3e449-25e5-4387-963d-0dbda7be90f5@rock-chips.com> (raw)
In-Reply-To: <aXBlBHZIPQ6xhykE@venus>
Hi Sebastian, Andrew,
On 1/21/2026 1:51 PM, Sebastian Reichel wrote:
> Hi,
>
> On Wed, Jan 21, 2026 at 11:15:45AM +0800, Chaoyi Chen wrote:
>> From: Chaoyi Chen <chaoyi.chen@rock-chips.com>
>>
>> According to the description in the net documentation, PHY modes
>> "rgmii", "rgmii-rxid" and "rgmii-txid" modes require the clock signal
>> to be delayed on the PCB.
>>
>> The Rockchip platform has long used the above mentioned PHY modes and
>> private delay prop to describe the internal IO delay settings of the
>> chip, which is inconsistent with what is described in the documentation.
>>
>> Some background, for RK3576, you can assume that:
>>
>> tx_delay_time(ns) = 0.0579 * delay_line_count + 0.105
>>
>> For example, tx_delay = <0x20> means:
>>
>> time = 0.0579 * 0x20 + 0.105 ns = 1.9578 ns
>>
>> Recently, Andrew has often mentioned the problem of phy mode in board
>> level configuration. So let's start with the RK3576 to modify this.
>>
>> Please test this series of patches, thanks.
>
> The RTL8211F PHY driver does not use the "tx-internal-delay-ps"
> property, which would require using phy_get_internal_delay(). Also
> the hardware only seems to support enabling/disabling a fixed delay
> of 2ns, so it cannot be implemented as far as I can tell. So unless
> I missed something, this series makes no sense as-is.
>
> My suggestion would be to add support for <rx/tx>-internal-delay-ps
> to the Rockchip GMAC driver by introducing a new rk_gmac_ops
> entry to translate the standard properties into register values:
>
> int rk3576_delay_conversion(unsigned int delay_ps) {
> return (delay_ps*10 - 1050) / 579;
> }
>
> That allows using standard properties in DT instead of vendor
> specific "rx_delay"/"tx_delay". This results in a much better board
> description and shows how far boards derive from the the standard
> 2ns (which can use rgmii-id without any extra delay specification).
>
Oh, your approach was also my initial thought.
I first asked whether it would be more appropriate to implement this
in the PHY or in the GMAC, and Andrew told me it should preferably be
done in the PHY. But I'm not sure whether all PHYs support this
operation.
Andrew, would it be possible to implement this in the GMAC for cases
where the PHY does not support it? Thanks.
--
Best,
Chaoyi
next prev parent reply other threads:[~2026-01-21 7:09 UTC|newest]
Thread overview: 15+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-01-21 3:15 Chaoyi Chen
2026-01-21 3:15 ` [PATCH 1/3] arm64: dts: rockchip: Change gmac phy-mode to rgmii-id for rk3576 evb1 Chaoyi Chen
2026-01-21 8:14 ` Diederik de Haas
2026-01-21 12:55 ` Andrew Lunn
2026-01-22 1:38 ` Chaoyi Chen
2026-01-22 2:40 ` Andrew Lunn
2026-01-22 3:16 ` Chaoyi Chen
2026-01-31 6:26 ` Chaoyi Chen
2026-01-21 3:15 ` [PATCH 2/3] arm64: dts: rockchip: Change gmac phy-mode to rgmii-id for roc-rk3576-pc Chaoyi Chen
2026-01-21 3:15 ` [PATCH 3/3] arm64: dts: rockchip: Change gmac phy-mode to rgmii-id for ROCK 4D Chaoyi Chen
2026-01-21 5:51 ` [PATCH 0/3] arm64: dts: rockchip: Change gmac phy-mode to rgmii-id for rk3576 board Sebastian Reichel
2026-01-21 6:54 ` Chaoyi Chen [this message]
2026-01-21 13:02 ` Andrew Lunn
2026-01-21 12:57 ` Andrew Lunn
2026-01-22 1:44 ` Chaoyi Chen
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=15a3e449-25e5-4387-963d-0dbda7be90f5@rock-chips.com \
--to=chaoyi.chen@rock-chips.com \
--cc=alchark@gmail.com \
--cc=andrew@lunn.ch \
--cc=andy.yan@rock-chips.com \
--cc=conor+dt@kernel.org \
--cc=detlev.casanova@collabora.com \
--cc=devicetree@vger.kernel.org \
--cc=heiko@sntech.de \
--cc=kernel@airkyi.com \
--cc=krzk+dt@kernel.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-rockchip@lists.infradead.org \
--cc=nicolas.frattaroli@collabora.com \
--cc=robh@kernel.org \
--cc=sebastian.reichel@collabora.com \
--cc=shawn.lin@rock-chips.com \
--cc=stephen@radxa.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®