[RESEND PATCH] regulator: core: return zero for selectors lower than linear_min_sel

[RESEND PATCH] regulator: core: return zero for selectors lower than linear_min_sel

[Claudiu Beznea]

Selectors lower than linear_min_sel should not be considered invalid.
Thus return zero in case _regulator_list_voltage(),
regulator_list_hardware_vsel() or regulator_list_voltage_table()
receives such selectors as argument.

Fixes: bdcd1177578c ("regulator: core: validate selector against linear_min_sel")
Reported-by: Jon Hunter <jonathanh@nvidia.com>
Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com>
---
 drivers/regulator/core.c    | 10 ++++++----
 drivers/regulator/helpers.c |  5 +++--
 2 files changed, 9 insertions(+), 6 deletions(-)

diff --git a/drivers/regulator/core.c b/drivers/regulator/core.c
index 216b0cbce199..ca03d8e70bd1 100644
--- a/drivers/regulator/core.c
+++ b/drivers/regulator/core.c
@@ -2956,9 +2956,10 @@ static int _regulator_list_voltage(struct regulator_dev *rdev,
 		return rdev->desc->fixed_uV;
 
 	if (ops->list_voltage) {
-		if (selector >= rdev->desc->n_voltages ||
-		    selector < rdev->desc->linear_min_sel)
+		if (selector >= rdev->desc->n_voltages)
 			return -EINVAL;
+		if (selector < rdev->desc->linear_min_sel)
+			return 0;
 		if (lock)
 			regulator_lock(rdev);
 		ret = ops->list_voltage(rdev, selector);
@@ -3108,9 +3109,10 @@ int regulator_list_hardware_vsel(struct regulator *regulator,
 	struct regulator_dev *rdev = regulator->rdev;
 	const struct regulator_ops *ops = rdev->desc->ops;
 
-	if (selector >= rdev->desc->n_voltages ||
-	    selector < rdev->desc->linear_min_sel)
+	if (selector >= rdev->desc->n_voltages)
 		return -EINVAL;
+	if (selector < rdev->desc->linear_min_sel)
+		return 0;
 	if (ops->set_voltage_sel != regulator_set_voltage_sel_regmap)
 		return -EOPNOTSUPP;
 
diff --git a/drivers/regulator/helpers.c b/drivers/regulator/helpers.c
index 974f1a63993d..f42b394a0c46 100644
--- a/drivers/regulator/helpers.c
+++ b/drivers/regulator/helpers.c
@@ -647,9 +647,10 @@ int regulator_list_voltage_table(struct regulator_dev *rdev,
 		return -EINVAL;
 	}
 
-	if (selector >= rdev->desc->n_voltages ||
-	    selector < rdev->desc->linear_min_sel)
+	if (selector >= rdev->desc->n_voltages)
 		return -EINVAL;
+	if (selector < rdev->desc->linear_min_sel)
+		return 0;
 
 	return rdev->desc->volt_table[selector];
 }
-- 
2.7.4

Re: [RESEND PATCH] regulator: core: return zero for selectors lower than linear_min_sel

[Mark Brown]

On Wed, 25 Nov 2020 19:25:47 +0200, Claudiu Beznea wrote:
> Selectors lower than linear_min_sel should not be considered invalid.
> Thus return zero in case _regulator_list_voltage(),
> regulator_list_hardware_vsel() or regulator_list_voltage_table()
> receives such selectors as argument.

Applied to

   https://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator.git for-next

Thanks!

[1/1] regulator: core: return zero for selectors lower than linear_min_sel
      commit: 55cca73931c3a08eb74f5ad06e88304af7a292e0

All being well this means that it will be integrated into the linux-next
tree (usually sometime in the next 24 hours) and sent to Linus during
the next merge window (or sooner if it is a bug fix), however if
problems are discovered then the patch may be dropped or reverted.

You may get further e-mails resulting from automated or manual testing
and review of the tree, please engage with people reporting problems and
send followup patches addressing any issues that are reported if needed.

If any updates are required or you are submitting further changes they
should be sent as incremental updates against current git, existing
patches will not be replaced.

Please add any relevant lists and maintainers to the CCs when replying
to this mail.

Thanks,
Mark