Re: [PATCH 2/5] ASoC: dt-bindings: document WCD939x Audio Codec

[Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>]

On 23/11/2023 15:49, Neil Armstrong wrote:

> +  Qualcomm WCD9390/WCD9395 Codec is a standalone Hi-Fi audio codec IC.
> +  It has RX and TX Soundwire slave devices.
> +  The WCD9390/WCD9395 IC has a functionally separate USB-C Mux subsystem
> +  accessible over an I2C interface.
> +  The Audio Headphone and Microphone data path between the Codec and the USB-C Mux
> +  subsystems are external to the IC, thus requiring DT port-endpoint graph description
> +  to handle USB-C altmode & orientation switching for Audio Accessory Mode.
> +
> +allOf:
> +  - $ref: dai-common.yaml#
> +  - $ref: qcom,wcd93xx-common.yaml#
> +
> +properties:
> +  compatible:
> +    enum:
> +      - qcom,wcd9390-codec
> +      - qcom,wcd9395-codec

9395 should be compatible with 9390, so please express it with a list
using fallback. I know that earlier wcd93xx do not follow that concept,
but maybe we will fix them some point as well.

> +
> +  mode-switch:
> +    description: Flag the port as possible handle of altmode switching
> +    type: boolean
> +
> +  orientation-switch:
> +    description: Flag the port as possible handler of orientation switching
> +    type: boolean
> +
> +  port:
> +    $ref: /schemas/graph.yaml#/properties/port
> +    description:
> +      A port node to link the WCD939x Codec node to USB MUX subsystems for the
> +      purpose of handling altmode muxing and orientation switching to detecte and
> +      enable Audio Accessory Mode.
> +
> +required:
> +  - compatible
> +
> +unevaluatedProperties: false
> +
> +examples:
> +  - |
> +    codec {
> +        compatible = "qcom,wcd9390-codec";
> +        reset-gpios = <&tlmm 32 0>;

Please define for the GPIO flag.

> +        #sound-dai-cells = <1>;
> +        qcom,tx-device = <&wcd939x_tx>;
> +        qcom,rx-device = <&wcd939x_rx>;
> +        qcom,micbias1-microvolt = <1800000>;
> +        qcom,micbias2-microvolt = <1800000>;
> +        qcom,micbias3-microvolt = <1800000>;
> +        qcom,micbias4-microvolt = <1800000>;
> +        qcom,hphl-jack-type-normally-closed;
> +        qcom,ground-jack-type-normally-closed;
> +        qcom,mbhc-buttons-vthreshold-microvolt = <75000 150000 237000 500000 500000 500000 500000 500000>;
> +        qcom,mbhc-headphone-vthreshold-microvolt = <50000>;
> +    };
> +
> +    /* ... */
> +
> +    soundwire@3210000 {
> +        #address-cells = <2>;
> +        #size-cells = <0>;
> +        reg = <0x03210000 0x2000>;
> +        wcd939x_rx: codec@0,4 {
> +            compatible = "sdw20217010e00";
> +            reg  = <0 4>;

Just one space before '='

> +            qcom,rx-port-mapping = <1 2 3 4 5 6>;
> +        };
> +    };
> +
> +    soundwire@3230000 {
> +        #address-cells = <2>;
> +        #size-cells = <0>;
> +        reg = <0x03230000 0x2000>;
> +        wcd938x_tx: codec@0,3 {
> +            compatible = "sdw20217010e00";
> +            reg  = <0 3>;

Ditto


Best regards,
Krzysztof