Re: [PATCH 1/3] regulator: pca9450: Add SD_VSEL GPIO for LDO5

[Mark Brown <broonie@kernel.org>]

On Thu, 11 Feb 2021 11:55:28 +0100, Schrempf Frieder wrote:
> LDO5 has two separate control registers. LDO5CTRL_L is used if the
> input signal SD_VSEL is low and LDO5CTRL_H if it is high.
> The current driver implementation only uses LDO5CTRL_H. To make this
> work on boards that have SD_VSEL connected to a GPIO, we add support
> for specifying an optional GPIO and setting it to high at probe time.
> 
> In the future we might also want to add support for boards that have
> SD_VSEL set to a fixed low level. In this case we need to change the
> driver to be able to use the LDO5CTRL_L register.

Applied to

   https://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator.git for-next

Thanks!

[1/3] regulator: pca9450: Add SD_VSEL GPIO for LDO5
      commit: 8c67a11bae889f51fe5054364c3c789dfae3ad73
[2/3] dt-bindings: regulator: pca9450: Add sd-vsel GPIO
      commit: 27866e3e8a7e93494f8374f48061aa73ee46ceb2
[3/3] regulator: pca9450: Enable system reset on WDOG_B assertion
      commit: f7684f5a048febd2a7bc98ee81d6dce52f7268b8

All being well this means that it will be integrated into the linux-next
tree (usually sometime in the next 24 hours) and sent to Linus during
the next merge window (or sooner if it is a bug fix), however if
problems are discovered then the patch may be dropped or reverted.

You may get further e-mails resulting from automated or manual testing
and review of the tree, please engage with people reporting problems and
send followup patches addressing any issues that are reported if needed.

If any updates are required or you are submitting further changes they
should be sent as incremental updates against current git, existing
patches will not be replaced.

Please add any relevant lists and maintainers to the CCs when replying
to this mail.

Thanks,
Mark