From: brookxu <brookxu.cn@gmail.com>
To: tj@kernel.org, lizefan.x@bytedance.com, hannes@cmpxchg.org
Cc: linux-kernel@vger.kernel.org, cgroups@vger.kernel.org
Subject: [PATCH] misc_cgroup: use a counter to count the number of failures
Date: Fri, 13 Aug 2021 13:26:11 +0800 [thread overview]
Message-ID: <1628832371-16382-1-git-send-email-brookxu.cn@gmail.com> (raw)
From: Chunguang Xu <brookxu@tencent.com>
For a container, we only print an error log when the resource
charge fails. There may be some problems here:
1. If a large number of containers are created and deleted,
there will be a lot of error logs.
2. According to an error log, we cannot better understand
the actual pressure of resources.
Therefore, perhaps we should use a failcnt counter to count
the number of failures, so that we can easily understand the
actual pressure of resources and avoid too many error log..
This is a partial patch of the previous serial, which may
be useful, so I resend it.
Signed-off-by: Chunguang Xu <brookxu@tencent.com>
---
include/linux/misc_cgroup.h | 4 ++--
kernel/cgroup/misc.c | 37 ++++++++++++++++++++++++++++++-------
2 files changed, 32 insertions(+), 9 deletions(-)
diff --git a/include/linux/misc_cgroup.h b/include/linux/misc_cgroup.h
index 8450a5e..32f6fc0 100644
--- a/include/linux/misc_cgroup.h
+++ b/include/linux/misc_cgroup.h
@@ -32,12 +32,12 @@ enum misc_res_type {
* struct misc_res: Per cgroup per misc type resource
* @max: Maximum limit on the resource.
* @usage: Current usage of the resource.
- * @failed: True if charged failed for the resource in a cgroup.
+ * @failcnt: Failure count of the resource
*/
struct misc_res {
unsigned long max;
atomic_long_t usage;
- bool failed;
+ atomic_long_t failcnt;
};
/**
diff --git a/kernel/cgroup/misc.c b/kernel/cgroup/misc.c
index 5d51b8e..1057901 100644
--- a/kernel/cgroup/misc.c
+++ b/kernel/cgroup/misc.c
@@ -158,13 +158,7 @@ int misc_cg_try_charge(enum misc_res_type type, struct misc_cg *cg,
new_usage = atomic_long_add_return(amount, &res->usage);
if (new_usage > READ_ONCE(res->max) ||
new_usage > READ_ONCE(misc_res_capacity[type])) {
- if (!res->failed) {
- pr_info("cgroup: charge rejected by the misc controller for %s resource in ",
- misc_res_name[type]);
- pr_cont_cgroup_path(i->css.cgroup);
- pr_cont("\n");
- res->failed = true;
- }
+ atomic_long_inc(&res->failcnt);
ret = -EBUSY;
goto err_charge;
}
@@ -313,6 +307,29 @@ static int misc_cg_current_show(struct seq_file *sf, void *v)
}
/**
+ * misc_cg_failcnt_show() - Show the fail count of the misc cgroup.
+ * @sf: Interface file
+ * @v: Arguments passed
+ *
+ * Context: Any context.
+ * Return: 0 to denote successful print.
+ */
+static int misc_cg_failcnt_show(struct seq_file *sf, void *v)
+{
+ int i;
+ unsigned long failcnt;
+ struct misc_cg *cg = css_misc(seq_css(sf));
+
+ for (i = 0; i < MISC_CG_RES_TYPES; i++) {
+ failcnt = atomic_long_read(&cg->res[i].failcnt);
+ if (READ_ONCE(misc_res_capacity[i]) || failcnt)
+ seq_printf(sf, "%s %lu\n", misc_res_name[i], failcnt);
+ }
+
+ return 0;
+}
+
+/**
* misc_cg_capacity_show() - Show the total capacity of misc res on the host.
* @sf: Interface file
* @v: Arguments passed
@@ -350,6 +367,11 @@ static int misc_cg_capacity_show(struct seq_file *sf, void *v)
.flags = CFTYPE_NOT_ON_ROOT,
},
{
+ .name = "failcnt",
+ .seq_show = misc_cg_failcnt_show,
+ .flags = CFTYPE_NOT_ON_ROOT,
+ },
+ {
.name = "capacity",
.seq_show = misc_cg_capacity_show,
.flags = CFTYPE_ONLY_ON_ROOT,
@@ -383,6 +405,7 @@ static int misc_cg_capacity_show(struct seq_file *sf, void *v)
for (i = 0; i < MISC_CG_RES_TYPES; i++) {
WRITE_ONCE(cg->res[i].max, MAX_NUM);
atomic_long_set(&cg->res[i].usage, 0);
+ atomic_long_set(&cg->res[i].failcnt, 0);
}
return &cg->css;
--
1.8.3.1
next reply other threads:[~2021-08-13 5:26 UTC|newest]
Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top
2021-08-13 5:26 brookxu [this message]
2021-08-13 16:16 ` Tejun Heo
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1628832371-16382-1-git-send-email-brookxu.cn@gmail.com \
--to=brookxu.cn@gmail.com \
--cc=cgroups@vger.kernel.org \
--cc=hannes@cmpxchg.org \
--cc=linux-kernel@vger.kernel.org \
--cc=lizefan.x@bytedance.com \
--cc=tj@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®