mirror of https://lore.kernel.org/lkml/
 help / color / mirror / Atom feed
* [PATCH net v1 1/1] net: dsa: microchip: fix kernel oops on ksz8 switches
@ 2022-09-02  9:27 Oleksij Rempel
  2022-09-03  9:50 ` patchwork-bot+netdevbpf
  0 siblings, 1 reply; 2+ messages in thread
From: Oleksij Rempel @ 2022-09-02  9:27 UTC (permalink / raw)
  To: Woojung Huh, UNGLinuxDriver, Andrew Lunn, Vivien Didelot,
	Florian Fainelli, Vladimir Oltean, David S. Miller, Eric Dumazet,
	Jakub Kicinski, Paolo Abeni
  Cc: Oleksij Rempel, kernel, linux-kernel, netdev, Arun.Ramadoss

After driver refactoring we was running ksz9477 specific CPU port
configuration on ksz8 family which ended with kernel oops. So, make sure
we run this code only on ksz9477 compatible devices.

Tested on KSZ8873 and KSZ9477.

Fixes: da8cd08520f3 ("net: dsa: microchip: add support for common phylink mac link up")
Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>
---
 drivers/net/dsa/microchip/ksz_common.c | 30 ++++++++++++++++++++------
 1 file changed, 24 insertions(+), 6 deletions(-)

diff --git a/drivers/net/dsa/microchip/ksz_common.c b/drivers/net/dsa/microchip/ksz_common.c
index 6bd69a7e6809d..872aba63e7d43 100644
--- a/drivers/net/dsa/microchip/ksz_common.c
+++ b/drivers/net/dsa/microchip/ksz_common.c
@@ -170,6 +170,13 @@ static const struct ksz_dev_ops ksz8_dev_ops = {
 	.exit = ksz8_switch_exit,
 };
 
+static void ksz9477_phylink_mac_link_up(struct ksz_device *dev, int port,
+					unsigned int mode,
+					phy_interface_t interface,
+					struct phy_device *phydev, int speed,
+					int duplex, bool tx_pause,
+					bool rx_pause);
+
 static const struct ksz_dev_ops ksz9477_dev_ops = {
 	.setup = ksz9477_setup,
 	.get_port_addr = ksz9477_get_port_addr,
@@ -196,6 +203,7 @@ static const struct ksz_dev_ops ksz9477_dev_ops = {
 	.mdb_del = ksz9477_mdb_del,
 	.change_mtu = ksz9477_change_mtu,
 	.max_mtu = ksz9477_max_mtu,
+	.phylink_mac_link_up = ksz9477_phylink_mac_link_up,
 	.config_cpu_port = ksz9477_config_cpu_port,
 	.enable_stp_addr = ksz9477_enable_stp_addr,
 	.reset = ksz9477_reset_switch,
@@ -230,6 +238,7 @@ static const struct ksz_dev_ops lan937x_dev_ops = {
 	.mdb_del = ksz9477_mdb_del,
 	.change_mtu = lan937x_change_mtu,
 	.max_mtu = ksz9477_max_mtu,
+	.phylink_mac_link_up = ksz9477_phylink_mac_link_up,
 	.config_cpu_port = lan937x_config_cpu_port,
 	.enable_stp_addr = ksz9477_enable_stp_addr,
 	.reset = lan937x_reset_switch,
@@ -1656,13 +1665,13 @@ static void ksz_duplex_flowctrl(struct ksz_device *dev, int port, int duplex,
 	ksz_prmw8(dev, port, regs[P_XMII_CTRL_0], mask, val);
 }
 
-static void ksz_phylink_mac_link_up(struct dsa_switch *ds, int port,
-				    unsigned int mode,
-				    phy_interface_t interface,
-				    struct phy_device *phydev, int speed,
-				    int duplex, bool tx_pause, bool rx_pause)
+static void ksz9477_phylink_mac_link_up(struct ksz_device *dev, int port,
+					unsigned int mode,
+					phy_interface_t interface,
+					struct phy_device *phydev, int speed,
+					int duplex, bool tx_pause,
+					bool rx_pause)
 {
-	struct ksz_device *dev = ds->priv;
 	struct ksz_port *p;
 
 	p = &dev->ports[port];
@@ -1676,6 +1685,15 @@ static void ksz_phylink_mac_link_up(struct dsa_switch *ds, int port,
 	ksz_port_set_xmii_speed(dev, port, speed);
 
 	ksz_duplex_flowctrl(dev, port, duplex, tx_pause, rx_pause);
+}
+
+static void ksz_phylink_mac_link_up(struct dsa_switch *ds, int port,
+				    unsigned int mode,
+				    phy_interface_t interface,
+				    struct phy_device *phydev, int speed,
+				    int duplex, bool tx_pause, bool rx_pause)
+{
+	struct ksz_device *dev = ds->priv;
 
 	if (dev->dev_ops->phylink_mac_link_up)
 		dev->dev_ops->phylink_mac_link_up(dev, port, mode, interface,
-- 
2.30.2


^ permalink raw reply	[flat|nested] 2+ messages in thread

end of thread, other threads:[~2022-09-03  9:50 UTC | newest]

Thread overview: 2+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2022-09-02  9:27 [PATCH net v1 1/1] net: dsa: microchip: fix kernel oops on ksz8 switches Oleksij Rempel
2022-09-03  9:50 ` patchwork-bot+netdevbpf

This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox

all inboxes | Powered by JetHome®