[PATCH V3 0/5] irqchip/loongson: Fix some loongson irqchip drivers

[PATCH V3 0/5] irqchip/loongson: Fix some loongson irqchip drivers

[Jianmin Lv]

The patch series provide some fixes for loongson-liointc and loongson-pch-pic driver.

V1->V2:
1. Adjust commit log for all patchs
2. Add some explanation for Loongson-3's polarity register

V2->V3:
1. Add a new patch[5] to fix irq affinity setting during resume for loongson-eiointc

Jianmin Lv (3):
  irqchip/loongson-pch-pic: Fix initialization of HT vector register
  irqchip/loongson-liointc: Fix IRQ trigger polarity
  irqchip/loongson-eiointc: Fix irq affinity setting during resume

Liu Peibao (1):
  irqchip/loongson-pch-pic: Fix potential incorrect hwirq assignment

Yinbo Zhu (1):
  irqchip/loongson-liointc: Add IRQCHIP_SKIP_SET_WAKE flag

 drivers/irqchip/irq-loongson-eiointc.c |  2 +-
 drivers/irqchip/irq-loongson-liointc.c | 13 +++++++++----
 drivers/irqchip/irq-loongson-pch-pic.c | 10 ++++------
 3 files changed, 14 insertions(+), 11 deletions(-)

-- 
2.31.1

[PATCH V3 1/5] irqchip/loongson-pch-pic: Fix initialization of HT vector register

[Jianmin Lv]

In an ACPI-based dual-bridge system, IRQ of each bridge's
PCH PIC sent to CPU is always a zero-based number, which
means that the IRQ on PCH PIC of each bridge is mapped into
vector range from 0 to 63 of upstream irqchip(e.g. EIOINTC).

      EIOINTC N: [0 ... 63 | 64 ... 255]
                  --------   ----------
                      ^          ^
                      |          |
                  PCH PIC N      |
                             PCH MSI N

For example, the IRQ vector number of sata controller on
PCH PIC of each bridge is 16, which is sent to upstream
irqchip of EIOINTC when an interrupt occurs, which will set
bit 16 of EIOINTC. Since hwirq of 16 on EIOINTC has been
mapped to a irq_desc for sata controller during hierarchy
irq allocation, the related mapped IRQ will be found through
irq_resolve_mapping() in the IRQ domain of EIOINTC.

So, the IRQ number set in HT vector register should be fixed
to be a zero-based number.

Cc: stable@vger.kernel.org
Reviewed-by: Huacai Chen <chenhuacai@loongson.cn>
Co-developed-by: liuyun <liuyun@loongson.cn>
Signed-off-by: liuyun <liuyun@loongson.cn>
Signed-off-by: Jianmin Lv <lvjianmin@loongson.cn>
---
 drivers/irqchip/irq-loongson-pch-pic.c | 6 ++----
 1 file changed, 2 insertions(+), 4 deletions(-)

diff --git a/drivers/irqchip/irq-loongson-pch-pic.c b/drivers/irqchip/irq-loongson-pch-pic.c
index e5fe4d50be05..921c5c0190d1 100644
--- a/drivers/irqchip/irq-loongson-pch-pic.c
+++ b/drivers/irqchip/irq-loongson-pch-pic.c
@@ -401,14 +401,12 @@ static int __init acpi_cascade_irqdomain_init(void)
 int __init pch_pic_acpi_init(struct irq_domain *parent,
 					struct acpi_madt_bio_pic *acpi_pchpic)
 {
-	int ret, vec_base;
+	int ret;
 	struct fwnode_handle *domain_handle;
 
 	if (find_pch_pic(acpi_pchpic->gsi_base) >= 0)
 		return 0;
 
-	vec_base = acpi_pchpic->gsi_base - GSI_MIN_PCH_IRQ;
-
 	domain_handle = irq_domain_alloc_fwnode(&acpi_pchpic->address);
 	if (!domain_handle) {
 		pr_err("Unable to allocate domain handle\n");
@@ -416,7 +414,7 @@ int __init pch_pic_acpi_init(struct irq_domain *parent,
 	}
 
 	ret = pch_pic_init(acpi_pchpic->address, acpi_pchpic->size,
-				vec_base, parent, domain_handle, acpi_pchpic->gsi_base);
+				0, parent, domain_handle, acpi_pchpic->gsi_base);
 
 	if (ret < 0) {
 		irq_domain_free_fwnode(domain_handle);
-- 
2.31.1

[irqchip: irq/irqchip-next] irqchip/loongson-pch-pic: Fix initialization of HT vector register

[irqchip-bot for Jianmin Lv]

The following commit has been merged into the irq/irqchip-next branch of irqchip:

Commit-ID:     f679616565f1cf1a4acb245dbc0032dafcd40637
Gitweb:        https://git.kernel.org/pub/scm/linux/kernel/git/maz/arm-platforms/f679616565f1cf1a4acb245dbc0032dafcd40637
Author:        Jianmin Lv <lvjianmin@loongson.cn>
AuthorDate:    Wed, 14 Jun 2023 19:59:32 +08:00
Committer:     Marc Zyngier <maz@kernel.org>
CommitterDate: Fri, 16 Jun 2023 12:59:28 +01:00

irqchip/loongson-pch-pic: Fix initialization of HT vector register

In an ACPI-based dual-bridge system, IRQ of each bridge's
PCH PIC sent to CPU is always a zero-based number, which
means that the IRQ on PCH PIC of each bridge is mapped into
vector range from 0 to 63 of upstream irqchip(e.g. EIOINTC).

      EIOINTC N: [0 ... 63 | 64 ... 255]
                  --------   ----------
                      ^          ^
                      |          |
                  PCH PIC N      |
                             PCH MSI N

For example, the IRQ vector number of sata controller on
PCH PIC of each bridge is 16, which is sent to upstream
irqchip of EIOINTC when an interrupt occurs, which will set
bit 16 of EIOINTC. Since hwirq of 16 on EIOINTC has been
mapped to a irq_desc for sata controller during hierarchy
irq allocation, the related mapped IRQ will be found through
irq_resolve_mapping() in the IRQ domain of EIOINTC.

So, the IRQ number set in HT vector register should be fixed
to be a zero-based number.

Cc: stable@vger.kernel.org
Reviewed-by: Huacai Chen <chenhuacai@loongson.cn>
Co-developed-by: liuyun <liuyun@loongson.cn>
Signed-off-by: liuyun <liuyun@loongson.cn>
Signed-off-by: Jianmin Lv <lvjianmin@loongson.cn>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20230614115936.5950-2-lvjianmin@loongson.cn
---
 drivers/irqchip/irq-loongson-pch-pic.c | 6 ++----
 1 file changed, 2 insertions(+), 4 deletions(-)

diff --git a/drivers/irqchip/irq-loongson-pch-pic.c b/drivers/irqchip/irq-loongson-pch-pic.c
index e5fe4d5..921c5c0 100644
--- a/drivers/irqchip/irq-loongson-pch-pic.c
+++ b/drivers/irqchip/irq-loongson-pch-pic.c
@@ -401,14 +401,12 @@ static int __init acpi_cascade_irqdomain_init(void)
 int __init pch_pic_acpi_init(struct irq_domain *parent,
 					struct acpi_madt_bio_pic *acpi_pchpic)
 {
-	int ret, vec_base;
+	int ret;
 	struct fwnode_handle *domain_handle;
 
 	if (find_pch_pic(acpi_pchpic->gsi_base) >= 0)
 		return 0;
 
-	vec_base = acpi_pchpic->gsi_base - GSI_MIN_PCH_IRQ;
-
 	domain_handle = irq_domain_alloc_fwnode(&acpi_pchpic->address);
 	if (!domain_handle) {
 		pr_err("Unable to allocate domain handle\n");
@@ -416,7 +414,7 @@ int __init pch_pic_acpi_init(struct irq_domain *parent,
 	}
 
 	ret = pch_pic_init(acpi_pchpic->address, acpi_pchpic->size,
-				vec_base, parent, domain_handle, acpi_pchpic->gsi_base);
+				0, parent, domain_handle, acpi_pchpic->gsi_base);
 
 	if (ret < 0) {
 		irq_domain_free_fwnode(domain_handle);

[PATCH V3 2/5] irqchip/loongson-pch-pic: Fix potential incorrect hwirq assignment

[Jianmin Lv]

From: Liu Peibao <liupeibao@loongson.cn>

In DeviceTree path, when ht_vec_base is not zero, the hwirq of PCH PIC
will be assigned incorrectly. Because when pch_pic_domain_translate()
adds the ht_vec_base to hwirq, the hwirq does not have the ht_vec_base
subtracted when calling irq_domain_set_info().

The ht_vec_base is designed for the parent irq chip/domain of the PCH PIC.
It seems not proper to deal this in callbacks of the PCH PIC domain and
let's put this back like the initial commit ef8c01eb64ca ("irqchip: Add
Loongson PCH PIC controller").

Fixes: bcdd75c596c8 ("irqchip/loongson-pch-pic: Add ACPI init support")
Cc: stable@vger.kernel.org
Reviewed-by: Huacai Chen <chenhuacai@loongson.cn>
Signed-off-by: Liu Peibao <liupeibao@loongson.cn>
Signed-off-by: Jianmin Lv <lvjianmin@loongson.cn>
---
 drivers/irqchip/irq-loongson-pch-pic.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/irqchip/irq-loongson-pch-pic.c b/drivers/irqchip/irq-loongson-pch-pic.c
index 921c5c0190d1..93a71f66efeb 100644
--- a/drivers/irqchip/irq-loongson-pch-pic.c
+++ b/drivers/irqchip/irq-loongson-pch-pic.c
@@ -164,7 +164,7 @@ static int pch_pic_domain_translate(struct irq_domain *d,
 		if (fwspec->param_count < 2)
 			return -EINVAL;
 
-		*hwirq = fwspec->param[0] + priv->ht_vec_base;
+		*hwirq = fwspec->param[0];
 		*type = fwspec->param[1] & IRQ_TYPE_SENSE_MASK;
 	} else {
 		if (fwspec->param_count < 1)
@@ -196,7 +196,7 @@ static int pch_pic_alloc(struct irq_domain *domain, unsigned int virq,
 
 	parent_fwspec.fwnode = domain->parent->fwnode;
 	parent_fwspec.param_count = 1;
-	parent_fwspec.param[0] = hwirq;
+	parent_fwspec.param[0] = hwirq + priv->ht_vec_base;
 
 	err = irq_domain_alloc_irqs_parent(domain, virq, 1, &parent_fwspec);
 	if (err)
-- 
2.31.1

[irqchip: irq/irqchip-next] irqchip/loongson-pch-pic: Fix potential incorrect hwirq assignment

[irqchip-bot for Liu Peibao]

The following commit has been merged into the irq/irqchip-next branch of irqchip:

Commit-ID:     783422e704ca0fa41cb2fe9ed79e46b6fe7eae29
Gitweb:        https://git.kernel.org/pub/scm/linux/kernel/git/maz/arm-platforms/783422e704ca0fa41cb2fe9ed79e46b6fe7eae29
Author:        Liu Peibao <liupeibao@loongson.cn>
AuthorDate:    Wed, 14 Jun 2023 19:59:33 +08:00
Committer:     Marc Zyngier <maz@kernel.org>
CommitterDate: Fri, 16 Jun 2023 12:59:28 +01:00

irqchip/loongson-pch-pic: Fix potential incorrect hwirq assignment

In DeviceTree path, when ht_vec_base is not zero, the hwirq of PCH PIC
will be assigned incorrectly. Because when pch_pic_domain_translate()
adds the ht_vec_base to hwirq, the hwirq does not have the ht_vec_base
subtracted when calling irq_domain_set_info().

The ht_vec_base is designed for the parent irq chip/domain of the PCH PIC.
It seems not proper to deal this in callbacks of the PCH PIC domain and
let's put this back like the initial commit ef8c01eb64ca ("irqchip: Add
Loongson PCH PIC controller").

Fixes: bcdd75c596c8 ("irqchip/loongson-pch-pic: Add ACPI init support")
Cc: stable@vger.kernel.org
Reviewed-by: Huacai Chen <chenhuacai@loongson.cn>
Signed-off-by: Liu Peibao <liupeibao@loongson.cn>
Signed-off-by: Jianmin Lv <lvjianmin@loongson.cn>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20230614115936.5950-3-lvjianmin@loongson.cn
---
 drivers/irqchip/irq-loongson-pch-pic.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/irqchip/irq-loongson-pch-pic.c b/drivers/irqchip/irq-loongson-pch-pic.c
index 921c5c0..93a71f6 100644
--- a/drivers/irqchip/irq-loongson-pch-pic.c
+++ b/drivers/irqchip/irq-loongson-pch-pic.c
@@ -164,7 +164,7 @@ static int pch_pic_domain_translate(struct irq_domain *d,
 		if (fwspec->param_count < 2)
 			return -EINVAL;
 
-		*hwirq = fwspec->param[0] + priv->ht_vec_base;
+		*hwirq = fwspec->param[0];
 		*type = fwspec->param[1] & IRQ_TYPE_SENSE_MASK;
 	} else {
 		if (fwspec->param_count < 1)
@@ -196,7 +196,7 @@ static int pch_pic_alloc(struct irq_domain *domain, unsigned int virq,
 
 	parent_fwspec.fwnode = domain->parent->fwnode;
 	parent_fwspec.param_count = 1;
-	parent_fwspec.param[0] = hwirq;
+	parent_fwspec.param[0] = hwirq + priv->ht_vec_base;
 
 	err = irq_domain_alloc_irqs_parent(domain, virq, 1, &parent_fwspec);
 	if (err)

[PATCH V3 3/5] irqchip/loongson-liointc: Fix IRQ trigger polarity

[Jianmin Lv]

For the INT_POLARITY register of Loongson-2K series IRQ
controller, '0' indicates high level or rising edge triggered,
'1' indicates low level or falling edge triggered, and we
can find out the information from the Loongson 2K1000LA User
Manual v1.0, Table 9-2, Section 9.3 (中断寄存器描述 / Description
of the Interrupt Registers).

For Loongson-3 CPU series, setting INT_POLARITY register is not
supported and writting it has no effect.

So trigger polarity setting shouled be fixed for Loongson-2K CPU
series.

Fixes: 17343d0b4039 ("irqchip/loongson-liointc: Support to set IRQ type for ACPI path")
Cc: stable@vger.kernel.org
Reviewed-by: Huacai Chen <chenhuacai@kernel.org>
Co-developed-by: Chong Qiao <qiaochong@loongson.cn>
Signed-off-by: Chong Qiao <qiaochong@loongson.cn>
Signed-off-by: Jianmin Lv <lvjianmin@loongson.cn>
---
 drivers/irqchip/irq-loongson-liointc.c | 12 ++++++++----
 1 file changed, 8 insertions(+), 4 deletions(-)

diff --git a/drivers/irqchip/irq-loongson-liointc.c b/drivers/irqchip/irq-loongson-liointc.c
index 8d00a9ad5b00..5dd9db8f8fa8 100644
--- a/drivers/irqchip/irq-loongson-liointc.c
+++ b/drivers/irqchip/irq-loongson-liointc.c
@@ -32,6 +32,10 @@
 #define LIOINTC_REG_INTC_EN_STATUS	(LIOINTC_INTC_CHIP_START + 0x04)
 #define LIOINTC_REG_INTC_ENABLE	(LIOINTC_INTC_CHIP_START + 0x08)
 #define LIOINTC_REG_INTC_DISABLE	(LIOINTC_INTC_CHIP_START + 0x0c)
+/*
+ * LIOINTC_REG_INTC_POL register is only valid for Loongson-2K series, and
+ * Loongson-3 series behave as noops.
+ */
 #define LIOINTC_REG_INTC_POL	(LIOINTC_INTC_CHIP_START + 0x10)
 #define LIOINTC_REG_INTC_EDGE	(LIOINTC_INTC_CHIP_START + 0x14)
 
@@ -116,19 +120,19 @@ static int liointc_set_type(struct irq_data *data, unsigned int type)
 	switch (type) {
 	case IRQ_TYPE_LEVEL_HIGH:
 		liointc_set_bit(gc, LIOINTC_REG_INTC_EDGE, mask, false);
-		liointc_set_bit(gc, LIOINTC_REG_INTC_POL, mask, true);
+		liointc_set_bit(gc, LIOINTC_REG_INTC_POL, mask, false);
 		break;
 	case IRQ_TYPE_LEVEL_LOW:
 		liointc_set_bit(gc, LIOINTC_REG_INTC_EDGE, mask, false);
-		liointc_set_bit(gc, LIOINTC_REG_INTC_POL, mask, false);
+		liointc_set_bit(gc, LIOINTC_REG_INTC_POL, mask, true);
 		break;
 	case IRQ_TYPE_EDGE_RISING:
 		liointc_set_bit(gc, LIOINTC_REG_INTC_EDGE, mask, true);
-		liointc_set_bit(gc, LIOINTC_REG_INTC_POL, mask, true);
+		liointc_set_bit(gc, LIOINTC_REG_INTC_POL, mask, false);
 		break;
 	case IRQ_TYPE_EDGE_FALLING:
 		liointc_set_bit(gc, LIOINTC_REG_INTC_EDGE, mask, true);
-		liointc_set_bit(gc, LIOINTC_REG_INTC_POL, mask, false);
+		liointc_set_bit(gc, LIOINTC_REG_INTC_POL, mask, true);
 		break;
 	default:
 		irq_gc_unlock_irqrestore(gc, flags);
-- 
2.31.1

[irqchip: irq/irqchip-next] irqchip/loongson-liointc: Fix IRQ trigger polarity

[irqchip-bot for Jianmin Lv]

The following commit has been merged into the irq/irqchip-next branch of irqchip:

Commit-ID:     1d7471b4e0ebba5a4bf9db4ade43619e8f2d333d
Gitweb:        https://git.kernel.org/pub/scm/linux/kernel/git/maz/arm-platforms/1d7471b4e0ebba5a4bf9db4ade43619e8f2d333d
Author:        Jianmin Lv <lvjianmin@loongson.cn>
AuthorDate:    Wed, 14 Jun 2023 19:59:34 +08:00
Committer:     Marc Zyngier <maz@kernel.org>
CommitterDate: Fri, 16 Jun 2023 12:59:28 +01:00

irqchip/loongson-liointc: Fix IRQ trigger polarity

For the INT_POLARITY register of Loongson-2K series IRQ
controller, '0' indicates high level or rising edge triggered,
'1' indicates low level or falling edge triggered, and we
can find out the information from the Loongson 2K1000LA User
Manual v1.0, Table 9-2, Section 9.3 (中断寄存器描述 / Description
of the Interrupt Registers).

For Loongson-3 CPU series, setting INT_POLARITY register is not
supported and writting it has no effect.

So trigger polarity setting shouled be fixed for Loongson-2K CPU
series.

Fixes: 17343d0b4039 ("irqchip/loongson-liointc: Support to set IRQ type for ACPI path")
Cc: stable@vger.kernel.org
Reviewed-by: Huacai Chen <chenhuacai@kernel.org>
Co-developed-by: Chong Qiao <qiaochong@loongson.cn>
Signed-off-by: Chong Qiao <qiaochong@loongson.cn>
Signed-off-by: Jianmin Lv <lvjianmin@loongson.cn>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20230614115936.5950-4-lvjianmin@loongson.cn
---
 drivers/irqchip/irq-loongson-liointc.c | 12 ++++++++----
 1 file changed, 8 insertions(+), 4 deletions(-)

diff --git a/drivers/irqchip/irq-loongson-liointc.c b/drivers/irqchip/irq-loongson-liointc.c
index 8d00a9a..5dd9db8 100644
--- a/drivers/irqchip/irq-loongson-liointc.c
+++ b/drivers/irqchip/irq-loongson-liointc.c
@@ -32,6 +32,10 @@
 #define LIOINTC_REG_INTC_EN_STATUS	(LIOINTC_INTC_CHIP_START + 0x04)
 #define LIOINTC_REG_INTC_ENABLE	(LIOINTC_INTC_CHIP_START + 0x08)
 #define LIOINTC_REG_INTC_DISABLE	(LIOINTC_INTC_CHIP_START + 0x0c)
+/*
+ * LIOINTC_REG_INTC_POL register is only valid for Loongson-2K series, and
+ * Loongson-3 series behave as noops.
+ */
 #define LIOINTC_REG_INTC_POL	(LIOINTC_INTC_CHIP_START + 0x10)
 #define LIOINTC_REG_INTC_EDGE	(LIOINTC_INTC_CHIP_START + 0x14)
 
@@ -116,19 +120,19 @@ static int liointc_set_type(struct irq_data *data, unsigned int type)
 	switch (type) {
 	case IRQ_TYPE_LEVEL_HIGH:
 		liointc_set_bit(gc, LIOINTC_REG_INTC_EDGE, mask, false);
-		liointc_set_bit(gc, LIOINTC_REG_INTC_POL, mask, true);
+		liointc_set_bit(gc, LIOINTC_REG_INTC_POL, mask, false);
 		break;
 	case IRQ_TYPE_LEVEL_LOW:
 		liointc_set_bit(gc, LIOINTC_REG_INTC_EDGE, mask, false);
-		liointc_set_bit(gc, LIOINTC_REG_INTC_POL, mask, false);
+		liointc_set_bit(gc, LIOINTC_REG_INTC_POL, mask, true);
 		break;
 	case IRQ_TYPE_EDGE_RISING:
 		liointc_set_bit(gc, LIOINTC_REG_INTC_EDGE, mask, true);
-		liointc_set_bit(gc, LIOINTC_REG_INTC_POL, mask, true);
+		liointc_set_bit(gc, LIOINTC_REG_INTC_POL, mask, false);
 		break;
 	case IRQ_TYPE_EDGE_FALLING:
 		liointc_set_bit(gc, LIOINTC_REG_INTC_EDGE, mask, true);
-		liointc_set_bit(gc, LIOINTC_REG_INTC_POL, mask, false);
+		liointc_set_bit(gc, LIOINTC_REG_INTC_POL, mask, true);
 		break;
 	default:
 		irq_gc_unlock_irqrestore(gc, flags);

[PATCH V3 4/5] irqchip/loongson-liointc: Add IRQCHIP_SKIP_SET_WAKE flag

[Jianmin Lv]

From: Yinbo Zhu <zhuyinbo@loongson.cn>

LIOINTC doesn't require specific logic to work with wakeup IRQs,
and no irq_set_wake callback is needed. To allow registered IRQs
from LIOINTC to be used as a wakeup-source, and ensure irq_set_irq_wake()
works well, the flag IRQCHIP_SKIP_SET_WAKE should be added.

Reviewed-by: Huacai Chen <chenhuacai@kernel.org>
Signed-off-by: Yinbo Zhu <zhuyinbo@loongson.cn>
Signed-off-by: Jianmin Lv <lvjianmin@loongson.cn>
---
 drivers/irqchip/irq-loongson-liointc.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/drivers/irqchip/irq-loongson-liointc.c b/drivers/irqchip/irq-loongson-liointc.c
index 5dd9db8f8fa8..e4b33aed1c97 100644
--- a/drivers/irqchip/irq-loongson-liointc.c
+++ b/drivers/irqchip/irq-loongson-liointc.c
@@ -295,6 +295,7 @@ static int liointc_init(phys_addr_t addr, unsigned long size, int revision,
 	ct->chip.irq_mask = irq_gc_mask_disable_reg;
 	ct->chip.irq_mask_ack = irq_gc_mask_disable_reg;
 	ct->chip.irq_set_type = liointc_set_type;
+	ct->chip.flags = IRQCHIP_SKIP_SET_WAKE;
 
 	gc->mask_cache = 0;
 	priv->gc = gc;
-- 
2.31.1

[irqchip: irq/irqchip-next] irqchip/loongson-liointc: Add IRQCHIP_SKIP_SET_WAKE flag

[irqchip-bot for Yinbo Zhu]

The following commit has been merged into the irq/irqchip-next branch of irqchip:

Commit-ID:     e01f9882f6fdbe0fa8ae39fe7691db2964e9fda6
Gitweb:        https://git.kernel.org/pub/scm/linux/kernel/git/maz/arm-platforms/e01f9882f6fdbe0fa8ae39fe7691db2964e9fda6
Author:        Yinbo Zhu <zhuyinbo@loongson.cn>
AuthorDate:    Wed, 14 Jun 2023 19:59:35 +08:00
Committer:     Marc Zyngier <maz@kernel.org>
CommitterDate: Fri, 16 Jun 2023 12:59:28 +01:00

irqchip/loongson-liointc: Add IRQCHIP_SKIP_SET_WAKE flag

LIOINTC doesn't require specific logic to work with wakeup IRQs,
and no irq_set_wake callback is needed. To allow registered IRQs
from LIOINTC to be used as a wakeup-source, and ensure irq_set_irq_wake()
works well, the flag IRQCHIP_SKIP_SET_WAKE should be added.

Reviewed-by: Huacai Chen <chenhuacai@kernel.org>
Signed-off-by: Yinbo Zhu <zhuyinbo@loongson.cn>
Signed-off-by: Jianmin Lv <lvjianmin@loongson.cn>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20230614115936.5950-5-lvjianmin@loongson.cn
---
 drivers/irqchip/irq-loongson-liointc.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/drivers/irqchip/irq-loongson-liointc.c b/drivers/irqchip/irq-loongson-liointc.c
index 5dd9db8..e4b33ae 100644
--- a/drivers/irqchip/irq-loongson-liointc.c
+++ b/drivers/irqchip/irq-loongson-liointc.c
@@ -295,6 +295,7 @@ static int liointc_init(phys_addr_t addr, unsigned long size, int revision,
 	ct->chip.irq_mask = irq_gc_mask_disable_reg;
 	ct->chip.irq_mask_ack = irq_gc_mask_disable_reg;
 	ct->chip.irq_set_type = liointc_set_type;
+	ct->chip.flags = IRQCHIP_SKIP_SET_WAKE;
 
 	gc->mask_cache = 0;
 	priv->gc = gc;

[PATCH V3 5/5] irqchip/loongson-eiointc: Fix irq affinity setting during resume

[Jianmin Lv]

The hierarchy of PCH PIC, PCH PCI MSI and EIONTC is as following:

        PCH PIC ------->|
                        |---->EIOINTC
        PCH PCI MSI --->|

so the irq_data list of irq_desc for IRQs on PCH PIC and PCH PCI MSI
is like this:

irq_desc->irq_data(domain: PCH PIC)->parent_data(domain: EIOINTC)
irq_desc->irq_data(domain: PCH PCI MSI)->parent_data(domain: EIOINTC)

In eiointc_resume(), the irq_data passed into eiointc_set_irq_affinity()
should be matched to EIOINTC domain instead of PCH PIC or PCH PCI MSI
domain, so fix it.

Fixes: a90335c2dfb4 ("irqchip/loongson-eiointc: Add suspend/resume support")

Reported-by: yangqiming <yangqiming@loongson.cn>
Signed-off-by: Jianmin Lv <lvjianmin@loongson.cn>
---
 drivers/irqchip/irq-loongson-eiointc.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/irqchip/irq-loongson-eiointc.c b/drivers/irqchip/irq-loongson-eiointc.c
index 71ef19f77a5a..a7fcde3e3ecc 100644
--- a/drivers/irqchip/irq-loongson-eiointc.c
+++ b/drivers/irqchip/irq-loongson-eiointc.c
@@ -314,7 +314,7 @@ static void eiointc_resume(void)
 			desc = irq_resolve_mapping(eiointc_priv[i]->eiointc_domain, j);
 			if (desc && desc->handle_irq && desc->handle_irq != handle_bad_irq) {
 				raw_spin_lock(&desc->lock);
-				irq_data = &desc->irq_data;
+				irq_data = irq_domain_get_irq_data(eiointc_priv[i]->eiointc_domain, irq_desc_get_irq(desc));
 				eiointc_set_irq_affinity(irq_data, irq_data->common->affinity, 0);
 				raw_spin_unlock(&desc->lock);
 			}
-- 
2.31.1

[irqchip: irq/irqchip-next] irqchip/loongson-eiointc: Fix irq affinity setting during resume

[irqchip-bot for Jianmin Lv]

The following commit has been merged into the irq/irqchip-next branch of irqchip:

Commit-ID:     fb07b8f83441febeb0daf199b5f18c6de9bbab03
Gitweb:        https://git.kernel.org/pub/scm/linux/kernel/git/maz/arm-platforms/fb07b8f83441febeb0daf199b5f18c6de9bbab03
Author:        Jianmin Lv <lvjianmin@loongson.cn>
AuthorDate:    Wed, 14 Jun 2023 19:59:36 +08:00
Committer:     Marc Zyngier <maz@kernel.org>
CommitterDate: Fri, 16 Jun 2023 12:59:28 +01:00

irqchip/loongson-eiointc: Fix irq affinity setting during resume

The hierarchy of PCH PIC, PCH PCI MSI and EIONTC is as following:

        PCH PIC ------->|
                        |---->EIOINTC
        PCH PCI MSI --->|

so the irq_data list of irq_desc for IRQs on PCH PIC and PCH PCI MSI
is like this:

irq_desc->irq_data(domain: PCH PIC)->parent_data(domain: EIOINTC)
irq_desc->irq_data(domain: PCH PCI MSI)->parent_data(domain: EIOINTC)

In eiointc_resume(), the irq_data passed into eiointc_set_irq_affinity()
should be matched to EIOINTC domain instead of PCH PIC or PCH PCI MSI
domain, so fix it.

Fixes: a90335c2dfb4 ("irqchip/loongson-eiointc: Add suspend/resume support")

Reported-by: yangqiming <yangqiming@loongson.cn>
Signed-off-by: Jianmin Lv <lvjianmin@loongson.cn>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20230614115936.5950-6-lvjianmin@loongson.cn
---
 drivers/irqchip/irq-loongson-eiointc.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/irqchip/irq-loongson-eiointc.c b/drivers/irqchip/irq-loongson-eiointc.c
index 71ef19f..a7fcde3 100644
--- a/drivers/irqchip/irq-loongson-eiointc.c
+++ b/drivers/irqchip/irq-loongson-eiointc.c
@@ -314,7 +314,7 @@ static void eiointc_resume(void)
 			desc = irq_resolve_mapping(eiointc_priv[i]->eiointc_domain, j);
 			if (desc && desc->handle_irq && desc->handle_irq != handle_bad_irq) {
 				raw_spin_lock(&desc->lock);
-				irq_data = &desc->irq_data;
+				irq_data = irq_domain_get_irq_data(eiointc_priv[i]->eiointc_domain, irq_desc_get_irq(desc));
 				eiointc_set_irq_affinity(irq_data, irq_data->common->affinity, 0);
 				raw_spin_unlock(&desc->lock);
 			}