[PATCH 0/2] regulator: qcom-rpmh: Add regulator support for SC8380XP

[PATCH 0/2] regulator: qcom-rpmh: Add regulator support for SC8380XP

[Sibi Sankar]

This series adds regulator support for the Qualcomm SC8380XP platform, aka Snapdragon X Elite.

Release Link: https://www.qualcomm.com/news/releases/2023/10/qualcomm-unleashes-snapdragon-x-elite--the-ai-super-charged-plat

Rajendra Nayak (2):
  dt-bindings: regulator: qcom,rpmh: Add PMC8380 compatible
  regulator: qcom-rpmh: Add regulators support for PMC8380

 .../regulator/qcom,rpmh-regulator.yaml        | 12 ++++++++++++
 drivers/regulator/qcom-rpmh-regulator.c       | 19 +++++++++++++++++++
 2 files changed, 31 insertions(+)

-- 
2.17.1

[PATCH 1/2] dt-bindings: regulator: qcom,rpmh: Add PMC8380 compatible

[Sibi Sankar]

From: Rajendra Nayak <quic_rjendra@quicinc.com>

Add PMC8380 compatibles for PMIC found in SC8380XP platform.

Signed-off-by: Rajendra Nayak <quic_rjendra@quicinc.com>
Signed-off-by: Sibi Sankar <quic_sibis@quicinc.com>
---
 .../bindings/regulator/qcom,rpmh-regulator.yaml      | 12 ++++++++++++
 1 file changed, 12 insertions(+)

diff --git a/Documentation/devicetree/bindings/regulator/qcom,rpmh-regulator.yaml b/Documentation/devicetree/bindings/regulator/qcom,rpmh-regulator.yaml
index 127a6f39b7f0..acd37f28ef53 100644
--- a/Documentation/devicetree/bindings/regulator/qcom,rpmh-regulator.yaml
+++ b/Documentation/devicetree/bindings/regulator/qcom,rpmh-regulator.yaml
@@ -50,6 +50,7 @@ description: |
       For PM8550, smps1 - smps6, ldo1 - ldo17, bob1 - bob2
       For PM8998, smps1 - smps13, ldo1 - ldo28, lvs1 - lvs2
       For PMI8998, bob
+      For PMC8380, smps1 - smps8, ldo1 - lodo3
       For PMR735A, smps1 - smps3, ldo1 - ldo7
       For PMX55, smps1 - smps7, ldo1 - ldo16
       For PMX65, smps1 - smps8, ldo1 - ldo21
@@ -78,6 +79,7 @@ properties:
       - qcom,pm8998-rpmh-regulators
       - qcom,pmc8180-rpmh-regulators
       - qcom,pmc8180c-rpmh-regulators
+      - qcom,pmc8380-rpmh-regulators
       - qcom,pmg1110-rpmh-regulators
       - qcom,pmi8998-rpmh-regulators
       - qcom,pmm8155au-rpmh-regulators
@@ -364,6 +366,16 @@ allOf:
       patternProperties:
         "^vdd-s([1-9]|1[0-3])-supply$": true
 
+  - if:
+      properties:
+        compatible:
+          enum:
+            - qcom,pmc8380-rpmh-regulators
+    then:
+      patternProperties:
+        "^vdd-l[1-3]-supply$": true
+        "^vdd-s[1-8]-supply$": true
+
   - if:
       properties:
         compatible:
-- 
2.17.1

[PATCH 2/2] regulator: qcom-rpmh: Add regulators support for PMC8380

[Sibi Sankar]

From: Rajendra Nayak <quic_rjendra@quicinc.com>

Add support from RPMH regulators found in PMC8380 for SC8380XP platform.

Signed-off-by: Rajendra Nayak <quic_rjendra@quicinc.com>
Signed-off-by: Sibi Sankar <quic_sibis@quicinc.com>
---
 drivers/regulator/qcom-rpmh-regulator.c | 19 +++++++++++++++++++
 1 file changed, 19 insertions(+)

diff --git a/drivers/regulator/qcom-rpmh-regulator.c b/drivers/regulator/qcom-rpmh-regulator.c
index b2e359ac3169..cf502eec0915 100644
--- a/drivers/regulator/qcom-rpmh-regulator.c
+++ b/drivers/regulator/qcom-rpmh-regulator.c
@@ -1106,6 +1106,21 @@ static const struct rpmh_vreg_init_data pm8550ve_vreg_data[] = {
 	{}
 };
 
+static const struct rpmh_vreg_init_data pmc8380_vreg_data[] = {
+	RPMH_VREG("smps1", "smp%s1", &pmic5_ftsmps525_lv, "vdd-s1"),
+	RPMH_VREG("smps2", "smp%s2", &pmic5_ftsmps525_lv, "vdd-s2"),
+	RPMH_VREG("smps3", "smp%s3", &pmic5_ftsmps525_lv, "vdd-s3"),
+	RPMH_VREG("smps4", "smp%s4", &pmic5_ftsmps525_mv, "vdd-s4"),
+	RPMH_VREG("smps5", "smp%s5", &pmic5_ftsmps525_lv, "vdd-s5"),
+	RPMH_VREG("smps6", "smp%s6", &pmic5_ftsmps525_lv, "vdd-s6"),
+	RPMH_VREG("smps7", "smp%s7", &pmic5_ftsmps525_lv, "vdd-s7"),
+	RPMH_VREG("smps8", "smp%s8", &pmic5_ftsmps525_lv, "vdd-s8"),
+	RPMH_VREG("ldo1",  "ldo%s1", &pmic5_nldo515,   "vdd-l1"),
+	RPMH_VREG("ldo2",  "ldo%s2", &pmic5_nldo515,   "vdd-l2"),
+	RPMH_VREG("ldo3",  "ldo%s3", &pmic5_nldo515,   "vdd-l3"),
+	{}
+};
+
 static const struct rpmh_vreg_init_data pm8009_vreg_data[] = {
 	RPMH_VREG("smps1",  "smp%s1",  &pmic5_hfsmps510, "vdd-s1"),
 	RPMH_VREG("smps2",  "smp%s2",  &pmic5_hfsmps515, "vdd-s2"),
@@ -1511,6 +1526,10 @@ static const struct of_device_id __maybe_unused rpmh_regulator_match_table[] = {
 		.compatible = "qcom,pmc8180c-rpmh-regulators",
 		.data = pm8150l_vreg_data,
 	},
+	{
+		.compatible = "qcom,pmc8380-rpmh-regulators",
+		.data = pmc8380_vreg_data,
+	},
 	{
 		.compatible = "qcom,pmm8155au-rpmh-regulators",
 		.data = pmm8155au_vreg_data,
-- 
2.17.1

Re: [PATCH 2/2] regulator: qcom-rpmh: Add regulators support for PMC8380

[Dmitry Baryshkov]

On Wed, 25 Oct 2023 at 16:57, Sibi Sankar <quic_sibis@quicinc.com> wrote:
>
> From: Rajendra Nayak <quic_rjendra@quicinc.com>
>
> Add support from RPMH regulators found in PMC8380 for SC8380XP platform.
>
> Signed-off-by: Rajendra Nayak <quic_rjendra@quicinc.com>
> Signed-off-by: Sibi Sankar <quic_sibis@quicinc.com>

Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>

>  drivers/regulator/qcom-rpmh-regulator.c | 19 +++++++++++++++++++
>  1 file changed, 19 insertions(+)

-- 
With best wishes
Dmitry

Re: [PATCH 0/2] regulator: qcom-rpmh: Add regulator support for SC8380XP

[Mark Brown]

On Wed, 25 Oct 2023 19:25:48 +0530, Sibi Sankar wrote:
> This series adds regulator support for the Qualcomm SC8380XP platform, aka Snapdragon X Elite.
> 
> Release Link: https://www.qualcomm.com/news/releases/2023/10/qualcomm-unleashes-snapdragon-x-elite--the-ai-super-charged-plat
> 
> Rajendra Nayak (2):
>   dt-bindings: regulator: qcom,rpmh: Add PMC8380 compatible
>   regulator: qcom-rpmh: Add regulators support for PMC8380
> 
> [...]

Applied to

   https://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator.git for-next

Thanks!

[1/2] dt-bindings: regulator: qcom,rpmh: Add PMC8380 compatible
      commit: ae61939cdf378ae3acc5716ccb43fef3cdace36e
[2/2] regulator: qcom-rpmh: Add regulators support for PMC8380
      commit: afb823a5843e6790106fcfe5029cfa736e05007f

All being well this means that it will be integrated into the linux-next
tree (usually sometime in the next 24 hours) and sent to Linus during
the next merge window (or sooner if it is a bug fix), however if
problems are discovered then the patch may be dropped or reverted.

You may get further e-mails resulting from automated or manual testing
and review of the tree, please engage with people reporting problems and
send followup patches addressing any issues that are reported if needed.

If any updates are required or you are submitting further changes they
should be sent as incremental updates against current git, existing
patches will not be replaced.

Please add any relevant lists and maintainers to the CCs when replying
to this mail.

Thanks,
Mark