[PATCH v10 2/4] firmware: qcom: scm: Modify only the download bits in TCSR register

[Mukesh Ojha <quic_mojha@quicinc.com>]

Crashdump collection is done based on DLOAD bits of TCSR register.
To retain other bits, scm driver need to read the register and
modify only the DLOAD bits, as other bits in TCSR may have their
own significance.

Co-developed-by: Poovendhan Selvaraj <quic_poovendh@quicinc.com>
Signed-off-by: Poovendhan Selvaraj <quic_poovendh@quicinc.com>
Signed-off-by: Mukesh Ojha <quic_mojha@quicinc.com>
Tested-by: Kathiravan Thirumoorthy <quic_kathirav@quicinc.com> # IPQ9574 and IPQ5332
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
---
 drivers/firmware/qcom/qcom_scm.c | 14 ++++++++++++--
 1 file changed, 12 insertions(+), 2 deletions(-)

diff --git a/drivers/firmware/qcom/qcom_scm.c b/drivers/firmware/qcom/qcom_scm.c
index 25549178a30f..4421f219fe9a 100644
--- a/drivers/firmware/qcom/qcom_scm.c
+++ b/drivers/firmware/qcom/qcom_scm.c
@@ -4,6 +4,8 @@
  */
 
 #include <linux/arm-smccc.h>
+#include <linux/bitfield.h>
+#include <linux/bits.h>
 #include <linux/clk.h>
 #include <linux/completion.h>
 #include <linux/cpumask.h>
@@ -117,6 +119,12 @@ static const u8 qcom_scm_cpu_warm_bits[QCOM_SCM_BOOT_MAX_CPUS] = {
 #define QCOM_SMC_WAITQ_FLAG_WAKE_ONE	BIT(0)
 #define QCOM_SMC_WAITQ_FLAG_WAKE_ALL	BIT(1)
 
+#define QCOM_DLOAD_MASK		GENMASK(5, 4)
+enum qcom_dload_mode {
+	QCOM_DLOAD_NODUMP	= 0,
+	QCOM_DLOAD_FULLDUMP	= 1,
+};
+
 static const char * const qcom_scm_convention_names[] = {
 	[SMC_CONVENTION_UNKNOWN] = "unknown",
 	[SMC_CONVENTION_ARM_32] = "smc arm 32",
@@ -523,6 +531,7 @@ static int __qcom_scm_set_dload_mode(struct device *dev, bool enable)
 
 static void qcom_scm_set_download_mode(bool enable)
 {
+	u32 val = enable ? QCOM_DLOAD_FULLDUMP : QCOM_DLOAD_NODUMP;
 	bool avail;
 	int ret = 0;
 
@@ -532,8 +541,9 @@ static void qcom_scm_set_download_mode(bool enable)
 	if (avail) {
 		ret = __qcom_scm_set_dload_mode(__scm->dev, enable);
 	} else if (__scm->dload_mode_addr) {
-		ret = qcom_scm_io_writel(__scm->dload_mode_addr,
-				enable ? QCOM_SCM_BOOT_SET_DLOAD_MODE : 0);
+		ret = qcom_scm_io_rmw(__scm->dload_mode_addr,
+				      QCOM_DLOAD_MASK,
+				      FIELD_PREP(QCOM_DLOAD_MASK, val));
 	} else {
 		dev_err(__scm->dev,
 			"No available mechanism for setting download mode\n");
-- 
2.7.4