[PATCH v3 0/9] Add R5F and C7xv device nodes

[PATCH v3 0/9] Add R5F and C7xv device nodes

[Judith Mendez]

For am62x and am62ax devices, this patch series adds device nodes
for the R5F subsystem and C7xv DSP subsystem found in their
respective voltage domain, based on the device TRMs [0][1].

This patch series also includes patches for enabling IPC for am62x,
am62ax, and am62px by reserving memory and binding the mailbox
assignments for each remote core.

Also reserve main_rti4 and main_timer2 for the C7x DSP as per
firmware requirements.

Changes since v2:
- Fix memory carvout sizes, remove leading zeros
- Reorder memory carveouts according to memory location
- Fix whitespace issues
- Fix commit headers, capitalize IPC and R5F

Links
v2: https://lore.kernel.org/linux-devicetree/20250131214611.3288742-1-jm@ti.com/
v1: https://lore.kernel.org/linux-devicetree/20250127221631.3974583-1-jm@ti.com/


[0] https://www.ti.com/lit/pdf/spruj16
[1] https://www.ti.com/lit/pdf/spruiv7

Devarsh Thakkar (3):
  arm64: dts: ti: k3-am62a-wakeup: Add R5F device node
  arm64: dts: ti: k3-am62a7-sk: Enable IPC with remote processors
  arm64: dts: ti: k3-am62p5-sk: Enable IPC with remote processors

Hari Nagalla (5):
  arm64: dts: ti: k3-am62-wakeup: Add wakeup R5F node
  arm64: dts: ti: k3-am62a-mcu: Add R5F remote proc node
  arm64: dts: ti: k3-am62x-sk-common: Enable IPC with remote processors
  arm64: dts: ti: k3-am62a7-sk: Reserve main_timer2 for C7x DSP
  arm64: dts: ti: k3-am62a7-sk: Reserve main_rti4 for C7x DSP

Jai Luthra (1):
  arm64: dts: ti: k3-am62a-main: Add C7xv device node

 arch/arm64/boot/dts/ti/k3-am62-wakeup.dtsi    |  25 +++++
 arch/arm64/boot/dts/ti/k3-am62a-main.dtsi     |  12 +++
 arch/arm64/boot/dts/ti/k3-am62a-mcu.dtsi      |  38 +++++++
 arch/arm64/boot/dts/ti/k3-am62a-wakeup.dtsi   |  25 +++++
 arch/arm64/boot/dts/ti/k3-am62a7-sk.dts       | 100 ++++++++++++++++--
 arch/arm64/boot/dts/ti/k3-am62p5-sk.dts       |  50 +++++++--
 .../arm64/boot/dts/ti/k3-am62x-sk-common.dtsi |  32 +++++-
 7 files changed, 265 insertions(+), 17 deletions(-)


base-commit: 5532b8a9ce0e80514e37a1e082824934663580a3
-- 
2.48.0

[PATCH v3 1/9] arm64: dts: ti: k3-am62-wakeup: Add wakeup R5F node

[Judith Mendez]

From: Hari Nagalla <hnagalla@ti.com>

AM62 SoC devices have a single core R5F processor in wakeup domain.
The R5F processor in wakeup domain is used as a device manager
for the SoC.

Signed-off-by: Devarsh Thakkar <devarsht@ti.com>
Signed-off-by: Hari Nagalla <hnagalla@ti.com>
Signed-off-by: Judith Mendez <jm@ti.com>
---
Changes since v2:
- Fix commit header, capitalize R5F
- Fix whitespace issues
---
 arch/arm64/boot/dts/ti/k3-am62-wakeup.dtsi | 25 ++++++++++++++++++++++
 1 file changed, 25 insertions(+)

diff --git a/arch/arm64/boot/dts/ti/k3-am62-wakeup.dtsi b/arch/arm64/boot/dts/ti/k3-am62-wakeup.dtsi
index 9b8a1f85aa15c..061819a64300f 100644
--- a/arch/arm64/boot/dts/ti/k3-am62-wakeup.dtsi
+++ b/arch/arm64/boot/dts/ti/k3-am62-wakeup.dtsi
@@ -106,6 +106,31 @@ wkup_rti0: watchdog@2b000000 {
 		status = "reserved";
 	};
 
+	wkup_r5fss0: r5fss@78000000 {
+		compatible = "ti,am62-r5fss";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges = <0x78000000 0x00 0x78000000 0x8000>,
+			 <0x78100000 0x00 0x78100000 0x8000>;
+		power-domains = <&k3_pds 119 TI_SCI_PD_EXCLUSIVE>;
+		status = "disabled";
+
+		wkup_r5fss0_core0: r5f@78000000 {
+			compatible = "ti,am62-r5f";
+			reg = <0x78000000 0x00008000>,
+			      <0x78100000 0x00008000>;
+			reg-names = "atcm", "btcm";
+			ti,sci = <&dmsc>;
+			ti,sci-dev-id = <121>;
+			ti,sci-proc-ids = <0x01 0xff>;
+			resets = <&k3_reset 121 1>;
+			firmware-name = "am62-wkup-r5f0_0-fw";
+			ti,atcm-enable = <1>;
+			ti,btcm-enable = <1>;
+			ti,loczrama = <1>;
+		};
+	};
+
 	wkup_vtm0: temperature-sensor@b00000 {
 		compatible = "ti,j7200-vtm";
 		reg = <0x00 0xb00000 0x00 0x400>,
-- 
2.48.0

Re: [PATCH v3 1/9] arm64: dts: ti: k3-am62-wakeup: Add wakeup R5F node

[Judith Mendez]

Hi all,

Please do not merge this patch series version.

I will be including one more node and send out v4, thanks!

~ Judith

On 2/3/25 7:16 PM, Judith Mendez wrote:
> From: Hari Nagalla <hnagalla@ti.com>
> 
> AM62 SoC devices have a single core R5F processor in wakeup domain.
> The R5F processor in wakeup domain is used as a device manager
> for the SoC.
> 
> Signed-off-by: Devarsh Thakkar <devarsht@ti.com>
> Signed-off-by: Hari Nagalla <hnagalla@ti.com>
> Signed-off-by: Judith Mendez <jm@ti.com>
> ---
> Changes since v2:
> - Fix commit header, capitalize R5F
> - Fix whitespace issues
> ---
>   arch/arm64/boot/dts/ti/k3-am62-wakeup.dtsi | 25 ++++++++++++++++++++++
>   1 file changed, 25 insertions(+)
> 
> diff --git a/arch/arm64/boot/dts/ti/k3-am62-wakeup.dtsi b/arch/arm64/boot/dts/ti/k3-am62-wakeup.dtsi
> index 9b8a1f85aa15c..061819a64300f 100644
> --- a/arch/arm64/boot/dts/ti/k3-am62-wakeup.dtsi
> +++ b/arch/arm64/boot/dts/ti/k3-am62-wakeup.dtsi
> @@ -106,6 +106,31 @@ wkup_rti0: watchdog@2b000000 {
>   		status = "reserved";
>   	};
>   
> +	wkup_r5fss0: r5fss@78000000 {
> +		compatible = "ti,am62-r5fss";
> +		#address-cells = <1>;
> +		#size-cells = <1>;
> +		ranges = <0x78000000 0x00 0x78000000 0x8000>,
> +			 <0x78100000 0x00 0x78100000 0x8000>;
> +		power-domains = <&k3_pds 119 TI_SCI_PD_EXCLUSIVE>;
> +		status = "disabled";
> +
> +		wkup_r5fss0_core0: r5f@78000000 {
> +			compatible = "ti,am62-r5f";
> +			reg = <0x78000000 0x00008000>,
> +			      <0x78100000 0x00008000>;
> +			reg-names = "atcm", "btcm";
> +			ti,sci = <&dmsc>;
> +			ti,sci-dev-id = <121>;
> +			ti,sci-proc-ids = <0x01 0xff>;
> +			resets = <&k3_reset 121 1>;
> +			firmware-name = "am62-wkup-r5f0_0-fw";
> +			ti,atcm-enable = <1>;
> +			ti,btcm-enable = <1>;
> +			ti,loczrama = <1>;
> +		};
> +	};
> +
>   	wkup_vtm0: temperature-sensor@b00000 {
>   		compatible = "ti,j7200-vtm";
>   		reg = <0x00 0xb00000 0x00 0x400>,

[PATCH v3 2/9] arm64: dts: ti: k3-am62a-mcu: Add R5F remote proc node

[Judith Mendez]

From: Hari Nagalla <hnagalla@ti.com>

AM62A SoCs have a single R5F core in the MCU voltage domain. The MCU
domain also has a 512KB sram memory, the R5F core can use for
applications needing fast memory access.

Signed-off-by: Hari Nagalla <hnagalla@ti.com>
Signed-off-by: Judith Mendez <jm@ti.com>
---
Changes since v2:
- Fix whitespace issues
---
 arch/arm64/boot/dts/ti/k3-am62a-mcu.dtsi | 38 ++++++++++++++++++++++++
 1 file changed, 38 insertions(+)

diff --git a/arch/arm64/boot/dts/ti/k3-am62a-mcu.dtsi b/arch/arm64/boot/dts/ti/k3-am62a-mcu.dtsi
index 0469c766b769e..e9042c986e68a 100644
--- a/arch/arm64/boot/dts/ti/k3-am62a-mcu.dtsi
+++ b/arch/arm64/boot/dts/ti/k3-am62a-mcu.dtsi
@@ -6,6 +6,18 @@
  */
 
 &cbass_mcu {
+	mcu_ram: sram@79100000 {
+		compatible = "mmio-sram";
+		reg = <0x00 0x79100000 0x00 0x80000>;
+		ranges = <0x00 0x00 0x79100000 0x80000>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+
+		mcu1-sram@0 {
+			reg = <0x0 0x80000>;
+		};
+	};
+
 	mcu_pmx0: pinctrl@4084000 {
 		compatible = "pinctrl-single";
 		reg = <0x00 0x04084000 0x00 0x88>;
@@ -175,4 +187,30 @@ mcu_mcan1: can@4e18000 {
 		bosch,mram-cfg = <0x0 128 64 64 64 64 32 32>;
 		status = "disabled";
 	};
+
+	mcu_r5fss0: r5fss@79000000 {
+		compatible = "ti,am62-r5fss";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges = <0x79000000 0x00 0x79000000 0x8000>,
+			 <0x79020000 0x00 0x79020000 0x8000>;
+		power-domains = <&k3_pds 7 TI_SCI_PD_EXCLUSIVE>;
+		status = "disabled";
+
+		mcu_r5fss0_core0: r5f@79000000 {
+			compatible = "ti,am62-r5f";
+			reg = <0x79000000 0x00008000>,
+			      <0x79020000 0x00008000>;
+			reg-names = "atcm", "btcm";
+			ti,sci = <&dmsc>;
+			ti,sci-dev-id = <9>;
+			ti,sci-proc-ids = <0x03 0xff>;
+			resets = <&k3_reset 9 1>;
+			firmware-name = "am62a-mcu-r5f0_0-fw";
+			ti,atcm-enable = <0>;
+			ti,btcm-enable = <1>;
+			ti,loczrama = <0>;
+			sram = <&mcu_ram>;
+		};
+	};
 };
-- 
2.48.0

[PATCH v3 3/9] arm64: dts: ti: k3-am62a-wakeup: Add R5F device node

[Judith Mendez]

From: Devarsh Thakkar <devarsht@ti.com>

AM62A SoCs have a single R5F core in wakeup domain. This core is
also used as a device manager for the SoC.

Signed-off-by: Devarsh Thakkar <devarsht@ti.com>
Signed-off-by: Hari Nagalla <hnagalla@ti.com>
Signed-off-by: Judith Mendez <jm@ti.com>
---
Changes since v2:
- Fix whitespace issues
---
 arch/arm64/boot/dts/ti/k3-am62a-wakeup.dtsi | 25 +++++++++++++++++++++
 1 file changed, 25 insertions(+)

diff --git a/arch/arm64/boot/dts/ti/k3-am62a-wakeup.dtsi b/arch/arm64/boot/dts/ti/k3-am62a-wakeup.dtsi
index b2c8f53517438..785b9f00033a4 100644
--- a/arch/arm64/boot/dts/ti/k3-am62a-wakeup.dtsi
+++ b/arch/arm64/boot/dts/ti/k3-am62a-wakeup.dtsi
@@ -103,6 +103,31 @@ wkup_rti0: watchdog@2b000000 {
 		status = "reserved";
 	};
 
+	wkup_r5fss0: r5fss@78000000 {
+		compatible = "ti,am62-r5fss";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges = <0x78000000 0x00 0x78000000 0x8000>,
+			 <0x78100000 0x00 0x78100000 0x8000>;
+		power-domains = <&k3_pds 119 TI_SCI_PD_EXCLUSIVE>;
+		status = "disabled";
+
+		wkup_r5fss0_core0: r5f@78000000 {
+			compatible = "ti,am62-r5f";
+			reg = <0x78000000 0x00008000>,
+			      <0x78100000 0x00008000>;
+			reg-names = "atcm", "btcm";
+			ti,sci = <&dmsc>;
+			ti,sci-dev-id = <121>;
+			ti,sci-proc-ids = <0x01 0xff>;
+			resets = <&k3_reset 121 1>;
+			firmware-name = "am62a-wkup-r5f0_0-fw";
+			ti,atcm-enable = <1>;
+			ti,btcm-enable = <1>;
+			ti,loczrama = <1>;
+		};
+	};
+
 	wkup_vtm0: temperature-sensor@b00000 {
 		compatible = "ti,j7200-vtm";
 		reg = <0x00 0xb00000 0x00 0x400>,
-- 
2.48.0

[PATCH v3 4/9] arm64: dts: ti: k3-am62a-main: Add C7xv device node

[Judith Mendez]

From: Jai Luthra <j-luthra@ti.com>

AM62A SoCs have a C7xv DSP subsystem with Analytics engine capability.
This subsystem is intended for deep learning purposes. Define the
device node for C7xv DSP.

Signed-off-by: Jai Luthra <j-luthra@ti.com>
Signed-off-by: Hari Nagalla <hnagalla@ti.com>
Signed-off-by: Judith Mendez <jm@ti.com>
---
Changes since v2:
- No change
---
 arch/arm64/boot/dts/ti/k3-am62a-main.dtsi | 12 ++++++++++++
 1 file changed, 12 insertions(+)

diff --git a/arch/arm64/boot/dts/ti/k3-am62a-main.dtsi b/arch/arm64/boot/dts/ti/k3-am62a-main.dtsi
index a1daba7b1fad5..f6ebc4eabaf14 100644
--- a/arch/arm64/boot/dts/ti/k3-am62a-main.dtsi
+++ b/arch/arm64/boot/dts/ti/k3-am62a-main.dtsi
@@ -1123,6 +1123,18 @@ vpu: video-codec@30210000 {
 		power-domains = <&k3_pds 204 TI_SCI_PD_EXCLUSIVE>;
 	};
 
+	c7x_0: dsp@7e000000 {
+		compatible = "ti,am62a-c7xv-dsp";
+		reg = <0x00 0x7e000000 0x00 0x00100000>;
+		reg-names = "l2sram";
+		ti,sci = <&dmsc>;
+		ti,sci-dev-id = <208>;
+		ti,sci-proc-ids = <0x04 0xff>;
+		resets = <&k3_reset 208 1>;
+		firmware-name = "am62a-c71_0-fw";
+		status = "disabled";
+	};
+
 	e5010: jpeg-encoder@fd20000 {
 		compatible = "ti,am62a-jpeg-enc", "img,e5010-jpeg-enc";
 		reg = <0x00 0xfd20000 0x00 0x100>,
-- 
2.48.0

[PATCH v3 5/9] arm64: dts: ti: k3-am62a7-sk: Enable IPC with remote processors

[Judith Mendez]

From: Devarsh Thakkar <devarsht@ti.com>

For each remote proc, reserve memory for IPC and bind the mailbox
assignments. Two memory regions are reserved for each remote processor.
The first region of 1MB of memory is used for Vring shared buffers
and the second region is used as external memory to the remote processor
for the resource table and for tracebuffer allocations.

Signed-off-by: Devarsh Thakkar <devarsht@ti.com>
Signed-off-by: Hari Nagalla <hnagalla@ti.com>
Signed-off-by: Judith Mendez <jm@ti.com>
---
Changes since v2:
- Fix memory carvout sizes, remove leading zeros
- Reorder memory carveouts according to memory location
- Fix whitespace issues
- Fix commit headers, capitalize IPC
---
 arch/arm64/boot/dts/ti/k3-am62a7-sk.dts | 90 +++++++++++++++++++++++--
 1 file changed, 84 insertions(+), 6 deletions(-)

diff --git a/arch/arm64/boot/dts/ti/k3-am62a7-sk.dts b/arch/arm64/boot/dts/ti/k3-am62a7-sk.dts
index a6f0d87a50d8a..eaffbab093cc1 100644
--- a/arch/arm64/boot/dts/ti/k3-am62a7-sk.dts
+++ b/arch/arm64/boot/dts/ti/k3-am62a7-sk.dts
@@ -49,6 +49,42 @@ linux,cma {
 			linux,cma-default;
 		};
 
+		c7x_0_dma_memory_region: c7x-dma-memory@99800000 {
+			compatible = "shared-dma-pool";
+			reg = <0x00 0x99800000 0x00 0x100000>;
+			no-map;
+		};
+
+		c7x_0_memory_region: c7x-memory@99900000 {
+			compatible = "shared-dma-pool";
+			reg = <0x00 0x99900000 0x00 0xf00000>;
+			no-map;
+		};
+
+		mcu_r5fss0_core0_dma_memory_region: r5f-dma-memory@9b800000 {
+			compatible = "shared-dma-pool";
+			reg = <0x00 0x9b800000 0x00 0x100000>;
+			no-map;
+		};
+
+		mcu_r5fss0_core0_memory_region: r5f-dma-memory@9b900000 {
+			compatible = "shared-dma-pool";
+			reg = <0x00 0x9b900000 0x00 0xf00000>;
+			no-map;
+		};
+
+		wkup_r5fss0_core0_dma_memory_region: r5f-dma-memory@9c800000 {
+			compatible = "shared-dma-pool";
+			reg = <0x00 0x9c800000 0x00 0x100000>;
+			no-map;
+		};
+
+		wkup_r5fss0_core0_memory_region: r5f-dma-memory@9c900000 {
+			compatible = "shared-dma-pool";
+			reg = <0x00 0x9c900000 0x00 0x1e00000>;
+			no-map;
+		};
+
 		secure_tfa_ddr: tfa@9e780000 {
 			reg = <0x00 0x9e780000 0x00 0x80000>;
 			alignment = <0x1000>;
@@ -60,12 +96,6 @@ secure_ddr: optee@9e800000 {
 			alignment = <0x1000>;
 			no-map;
 		};
-
-		wkup_r5fss0_core0_memory_region: r5f-dma-memory@9c900000 {
-			compatible = "shared-dma-pool";
-			reg = <0x00 0x9c900000 0x00 0x01e00000>;
-			no-map;
-		};
 	};
 
 	opp-table {
@@ -737,3 +767,51 @@ dpi1_out: endpoint {
 		};
 	};
 };
+
+&mailbox0_cluster0 {
+	mbox_r5_0: mbox-r5-0 {
+		ti,mbox-rx = <0 0 0>;
+		ti,mbox-tx = <1 0 0>;
+	};
+};
+
+&mailbox0_cluster1 {
+	mbox_c7x_0: mbox-c7x-0 {
+		ti,mbox-rx = <0 0 0>;
+		ti,mbox-tx = <1 0 0>;
+	};
+};
+
+&mailbox0_cluster2 {
+	mbox_mcu_r5_0: mbox-mcu-r5-0 {
+		ti,mbox-rx = <0 0 0>;
+		ti,mbox-tx = <1 0 0>;
+	};
+};
+
+&wkup_r5fss0 {
+	status = "okay";
+};
+
+&wkup_r5fss0_core0 {
+	mboxes = <&mailbox0_cluster0>, <&mbox_r5_0>;
+	memory-region = <&wkup_r5fss0_core0_dma_memory_region>,
+			<&wkup_r5fss0_core0_memory_region>;
+};
+
+&mcu_r5fss0 {
+	status = "okay";
+};
+
+&mcu_r5fss0_core0 {
+	mboxes = <&mailbox0_cluster2>, <&mbox_mcu_r5_0>;
+	memory-region = <&mcu_r5fss0_core0_dma_memory_region>,
+			<&mcu_r5fss0_core0_memory_region>;
+};
+
+&c7x_0 {
+	mboxes = <&mailbox0_cluster1>, <&mbox_c7x_0>;
+	memory-region = <&c7x_0_dma_memory_region>,
+			<&c7x_0_memory_region>;
+	status = "okay";
+};
-- 
2.48.0

[PATCH v3 6/9] arm64: dts: ti: k3-am62p5-sk: Enable IPC with remote processors

[Judith Mendez]

From: Devarsh Thakkar <devarsht@ti.com>

For each remote proc, reserve memory for IPC and bind the mailbox
assignments. Two memory regions are reserved for each remote processor.
The first region of 1MB of memory is used for Vring shared buffers
and the second region is used as external memory to the remote processor
for the resource table and for tracebuffer allocations.

Signed-off-by: Devarsh Thakkar <devarsht@ti.com>
Signed-off-by: Hari Nagalla <hnagalla@ti.com>
Signed-off-by: Judith Mendez <jm@ti.com>
---
Changes since v2:
- Fix memory carvout sizes, remove leading zeros
- Reorder memory carveouts according to memory location
- Fix whitespace issues
- Fix commit headers, capitalize IPC
---
 arch/arm64/boot/dts/ti/k3-am62p5-sk.dts | 50 ++++++++++++++++++++++---
 1 file changed, 44 insertions(+), 6 deletions(-)

diff --git a/arch/arm64/boot/dts/ti/k3-am62p5-sk.dts b/arch/arm64/boot/dts/ti/k3-am62p5-sk.dts
index ad71d2f27f538..9609727d042d3 100644
--- a/arch/arm64/boot/dts/ti/k3-am62p5-sk.dts
+++ b/arch/arm64/boot/dts/ti/k3-am62p5-sk.dts
@@ -48,6 +48,30 @@ reserved-memory {
 		#size-cells = <2>;
 		ranges;
 
+		mcu_r5fss0_core0_dma_memory_region: mcu-r5fss-dma-memory-region@9b800000 {
+			compatible = "shared-dma-pool";
+			reg = <0x00 0x9b800000 0x00 0x100000>;
+			no-map;
+		};
+
+		mcu_r5fss0_core0_memory_region: mcu-r5fss-memory-region@9b900000 {
+			compatible = "shared-dma-pool";
+			reg = <0x00 0x9b900000 0x00 0xf00000>;
+			no-map;
+		};
+
+		wkup_r5fss0_core0_dma_memory_region: r5f-dma-memory@9c800000 {
+			compatible = "shared-dma-pool";
+			reg = <0x00 0x9c800000 0x00 0x100000>;
+			no-map;
+		};
+
+		wkup_r5fss0_core0_memory_region: r5f-memory@9c900000 {
+			compatible = "shared-dma-pool";
+			reg = <0x00 0x9c900000 0x00 0x1e00000>;
+			no-map;
+		};
+
 		secure_tfa_ddr: tfa@9e780000 {
 			reg = <0x00 0x9e780000 0x00 0x80000>;
 			no-map;
@@ -57,12 +81,6 @@ secure_ddr: optee@9e800000 {
 			reg = <0x00 0x9e800000 0x00 0x01800000>; /* for OP-TEE */
 			no-map;
 		};
-
-		wkup_r5fss0_core0_memory_region: r5f-dma-memory@9c900000 {
-			compatible = "shared-dma-pool";
-			reg = <0x00 0x9c900000 0x00 0x01e00000>;
-			no-map;
-		};
 	};
 
 	vmain_pd: regulator-0 {
@@ -638,6 +656,26 @@ mbox_mcu_r5_0: mbox-mcu-r5-0 {
 	};
 };
 
+&wkup_r5fss0 {
+	status = "okay";
+};
+
+&wkup_r5fss0_core0 {
+	mboxes = <&mailbox0_cluster0 &mbox_r5_0>;
+	memory-region = <&wkup_r5fss0_core0_dma_memory_region>,
+			<&wkup_r5fss0_core0_memory_region>;
+};
+
+&mcu_r5fss0 {
+	status = "okay";
+};
+
+&mcu_r5fss0_core0 {
+	mboxes = <&mailbox0_cluster1 &mbox_mcu_r5_0>;
+	memory-region = <&mcu_r5fss0_core0_dma_memory_region>,
+			<&mcu_r5fss0_core0_memory_region>;
+};
+
 &main_uart0 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&main_uart0_pins_default>;
-- 
2.48.0

[PATCH v3 7/9] arm64: dts: ti: k3-am62x-sk-common: Enable IPC with remote processors

[Judith Mendez]

From: Hari Nagalla <hnagalla@ti.com>

For each remote proc, reserve memory for IPC and bind the mailbox
assignments. Two memory regions are reserved for each remote processor.
The first region of 1MB of memory is used for Vring shared buffers
and the second region is used as external memory to the remote processor
for the resource table and for tracebuffer allocations.

Signed-off-by: Devarsh Thakkar <devarsht@ti.com>
Signed-off-by: Hari Nagalla <hnagalla@ti.com>
Signed-off-by: Judith Mendez <jm@ti.com>
---
Changes since v2:
- Fix memory carvout sizes, remove leading zeros
- Reorder memory carveouts according to memory location
- Fix whitespace issues
- Fix commit headers, capitalize IPC
---
 .../arm64/boot/dts/ti/k3-am62x-sk-common.dtsi | 32 ++++++++++++++++---
 1 file changed, 27 insertions(+), 5 deletions(-)

diff --git a/arch/arm64/boot/dts/ti/k3-am62x-sk-common.dtsi b/arch/arm64/boot/dts/ti/k3-am62x-sk-common.dtsi
index 2f129e8cd5b9f..9ea4de9303f51 100644
--- a/arch/arm64/boot/dts/ti/k3-am62x-sk-common.dtsi
+++ b/arch/arm64/boot/dts/ti/k3-am62x-sk-common.dtsi
@@ -68,6 +68,18 @@ mcu_m4fss_memory_region: m4f-memory@9cc00000 {
 			no-map;
 		};
 
+		wkup_r5fss0_core0_dma_memory_region: r5f-dma-memory@9da00000 {
+			compatible = "shared-dma-pool";
+			reg = <0x00 0x9da00000 0x00 0x100000>;
+			no-map;
+		};
+
+		wkup_r5fss0_core0_memory_region: r5f-memory@9db00000 {
+			compatible = "shared-dma-pool";
+			reg = <0x00 0x9db00000 0x00 0xc00000>;
+			no-map;
+		};
+
 		secure_tfa_ddr: tfa@9e780000 {
 			reg = <0x00 0x9e780000 0x00 0x80000>;
 			alignment = <0x1000>;
@@ -80,11 +92,6 @@ secure_ddr: optee@9e800000 {
 			no-map;
 		};
 
-		wkup_r5fss0_core0_dma_memory_region: r5f-dma-memory@9db00000 {
-			compatible = "shared-dma-pool";
-			reg = <0x00 0x9db00000 0x00 0xc00000>;
-			no-map;
-		};
 	};
 
 	leds {
@@ -478,6 +485,11 @@ mbox_m4_0: mbox-m4-0 {
 		ti,mbox-rx = <0 0 0>;
 		ti,mbox-tx = <1 0 0>;
 	};
+
+	mbox_r5_0: mbox-r5-0 {
+		ti,mbox-rx = <2 0 0>;
+		ti,mbox-tx = <3 0 0>;
+	};
 };
 
 &mcu_m4fss {
@@ -487,6 +499,16 @@ &mcu_m4fss {
 	status = "okay";
 };
 
+&wkup_r5fss0 {
+	status = "okay";
+};
+
+&wkup_r5fss0_core0 {
+	mboxes = <&mailbox0_cluster0 &mbox_r5_0>;
+	memory-region = <&wkup_r5fss0_core0_dma_memory_region>,
+			<&wkup_r5fss0_core0_memory_region>;
+};
+
 &usbss0 {
 	bootph-all;
 	status = "okay";
-- 
2.48.0

[PATCH v3 8/9] arm64: dts: ti: k3-am62a7-sk: Reserve main_timer2 for C7x DSP

[Judith Mendez]

From: Hari Nagalla <hnagalla@ti.com>

C7x DSP uses main_timer2, so mark it as reserved in linux DT.

Signed-off-by: Hari Nagalla <hnagalla@ti.com>
Signed-off-by: Judith Mendez <jm@ti.com>
---
Changes since v2:
- No change
---
 arch/arm64/boot/dts/ti/k3-am62a7-sk.dts | 5 +++++
 1 file changed, 5 insertions(+)

diff --git a/arch/arm64/boot/dts/ti/k3-am62a7-sk.dts b/arch/arm64/boot/dts/ti/k3-am62a7-sk.dts
index eaffbab093cc1..f03b06b7de51d 100644
--- a/arch/arm64/boot/dts/ti/k3-am62a7-sk.dts
+++ b/arch/arm64/boot/dts/ti/k3-am62a7-sk.dts
@@ -679,6 +679,11 @@ &main_uart1 {
 	status = "reserved";
 };
 
+/* main_timer2 is used by C7x DSP */
+&main_timer2 {
+	status = "reserved";
+};
+
 &usbss0 {
 	status = "okay";
 	ti,vbus-divider;
-- 
2.48.0

[PATCH v3 9/9] arm64: dts: ti: k3-am62a7-sk: Reserve main_rti4 for C7x DSP

[Judith Mendez]

From: Hari Nagalla <hnagalla@ti.com>

The main rti4 watchdog timer is used by the C7x DSP, so reserve the
timer in the linux device tree.

Signed-off-by: Hari Nagalla <hnagalla@ti.com>
Signed-off-by: Judith Mendez <jm@ti.com>
---
Changes since v2:
- No change
---
 arch/arm64/boot/dts/ti/k3-am62a7-sk.dts | 5 +++++
 1 file changed, 5 insertions(+)

diff --git a/arch/arm64/boot/dts/ti/k3-am62a7-sk.dts b/arch/arm64/boot/dts/ti/k3-am62a7-sk.dts
index f03b06b7de51d..ffa437873f6d1 100644
--- a/arch/arm64/boot/dts/ti/k3-am62a7-sk.dts
+++ b/arch/arm64/boot/dts/ti/k3-am62a7-sk.dts
@@ -820,3 +820,8 @@ &c7x_0 {
 			<&c7x_0_memory_region>;
 	status = "okay";
 };
+
+/* main_rti4 is used by C7x DSP */
+&main_rti4 {
+	status = "reserved";
+};
-- 
2.48.0